The phone "Fly Phoenix 2" was discharged at night, I went to bed, this morning I wake up and put my device on charge, it came to life on its own, after which it gave the error "no command", after which I wanted to make a recovery using a script on the SD card , but I had it as my main memory, I took it out and installed the card with the script, after that it stopped turning on altogether, I’m sitting here charging it, waiting for answers. June 6

My Wecsler taBMW 10q tablet showed that there was no connection, I set it to reboot and the virus came out and was restored. Familiar and napivanovich team no June 3

I recently appropriated it from my brother Explay phone. Worked fine. I was walking and walking, I decided to take the phone out of my pocket, it slipped out of my hands, fell, I inserted the battery, turned it on, on the screen there was a picture with a lying bot, which symbolizes an android; its lid is open, next to the lid is a triangle, and in the triangle is “!” I got scared, the phone was expensive, and my mother would kill me, and out of fear, she started poking it everywhere. Then I began to solve the problem this way: I open the lid > carefully pull out the battery > insert the battery > insert the lid > hold down the power key. Hurray! The phone turned on as always. This happened to me 5 times. May 5

Filipok's phone is W6610, everything works except the reset. I’m doing backgammon, and Andryukha’s corpse is displayed with the inscription no command. I tried to remove unnecessary junk manually. After a reboot, everything returns to its place. But the new account is not saved... April 30

Tel. Samsung Galaxy2 recumbent android no commands, sent it for repair, reflashed it, nothing worked. Gave it to . Please tell me what this could be? Thank you. April 6

I have Explay Rio Play. Did a reset. It seemed like I did everything as needed, but when the phone turned off, the message “No command” appeared. I tried everything, but for some reason nothing works. Help please ((March 31

I have a Tesla Neon I7.0. This happened in July 2016. I put the tablet on charge overnight. I wake up and there is no tablet. It turns out he’s on the floor with the charger plugged in and writing. I was afraid that my dad would scold me and I went for a walk. Then I came home and turned off the tablet and then turned it on and everything worked! He probably fell. Try it, it will help you March 25

Yesterday everything was fine, in the morning I tried to reset the alarm clock and it said there was no connection to the alarm clock, I decided to restart it, I restarted it and when the phone turned on it said there was no command. March 14

The problem is the same, the droid does not turn on, it lies upside down once, but fell down again. It’s just another plus that my virus has ruined all my gadgets. The laptop and the other phone are still breathing, trying to fight, but the Lenovo A2010 immediately became a bot. It’s my fault that the root rights are simply set to zero. Now completely unconscious. Lying around. The firmware option via PC is NOT OFFERED. Thank you. In advance. March 3

Hello. I have tel. BV6000. The problem arose after updating the software to Android 7.0. Applications are malfunctioning. I'm trying to go into the mode menu to reset everything to the old version of Android 6.0, my lying Android lights up with an exclamation mark. Help with advice please. March 2

I received a notification about a software update, I turned on the update, the update passed, after that the update started in the background, after that the update error message appeared, after that the phone rebooted, when I turned it on, the command no message appeared and the droid was lying down! I know, help! February 16

On the Samsung galaxy s6 I can’t turn on the firmware mode (I simultaneously press the Home button, sound down, and the on button) and the screensaver just loads (Samsung galaxy s6) and nothing else happens, how can I turn on the firmware mode differently? January 25

The firmware on the DEXP ixion E145 has crashed, the recovery starts and the android is lying with an exclamation mark, nothing helps, the firmware is not installed, it writes an error, will the drivers help before the firmware and who has it? all actions without access to a computer are needed. January 6

We ordered an original Oukitel K4000 Pro MTK6735P phone from Ali. When turning it on, after 5 minutes it started turning itself off and on, the seller advised resetting it to factory settings. We did it, now when you turn it on, the command no appears on the screen ((

What to do if Android has an exclamation mark? In this article we will look at the main causes of device malfunction and ways to solve it.

The first version of the Android operating system appeared in 2008. The presence of a large number of functions, ease of use and low price compared to analogues made it accessible to a wide range of users. It is not surprising that issues related to long-term and uninterrupted operation of devices with this operating system, are very relevant.

An icon on the screen in the form of an android with an exclamation mark indicates a malfunction in the device software. It may be associated either with the installation of an unlicensed program, or with a virus infection.

Photo: Android lies with an exclamation mark

Typically, a user may encounter such a problem when turning on (rebooting) a smartphone or tablet. If this happened to you, what can you do?

The first thing they offer in such cases is this. To do this, you need to turn off the device, if necessary, charge it to 100% and turn it on in the developer menu mode. Since the key combination depends on the smartphone or tablet model, we recommend that you refer to the instructions. In the standard case, this can be done by simultaneously holding down the power, volume down and (or) Home buttons.

In some cases, after this action, the smartphone can return the factory settings automatically, but sometimes this must be done manually. Remember that in this state only the buttons work (you won’t be able to use the sensor). To move up and down menu items, you will have to use the volume keys. In the list, you need to select the “Wipe data/Factory reset” position with the Power or Home button, which means “delete data/reset settings” and confirm your choice in the next window that opens.

The main disadvantage of this action is that it will remove everything from your device that is not factory settings. And these are contacts, messages, photos, audio and video recordings and programs you installed. Therefore, if you do not want the safety of your data to depend entirely on one electronic device, do backups in advance.

If you are not sure that you can cope with this task yourself, it is better to contact a specialist, because any mistake can lead to catastrophic consequences.

If the “USB debugging” function is enabled in the Android settings, you can reflash the device.

Photo: USB debugging Photo: USB debugging

Unpack the already downloaded folder with the program on drive C. Check for downloaded drivers for your smartphone and install them if they are not there. Turn off the device, use a key combination to enter it into firmware mode and use a cord to connect it to the computer. Next, follow the instructions of the program.

If you have not connected the ability to debug your smartphone via a USB cable, consider another option: reinstall the software using the device itself and a flash card. To do this, you will have to return to the previously described menu again, selecting the option to restore using SD.

Photo: Flashing Android

In both options, at the end you will have to reset the system again to the original settings.

Let's summarize: Android lies with an exclamation mark - this is not an easy problem, but it can be solved. If you don't want to deal with it often, be careful about what you download to your device. Be sure to install it.

You can fix the problem either yourself or with the help of a specialist by resetting the settings or reinstalling the software.

Dear readers! If you have any questions or comments on the topic of the article, please leave them below.

If you have ever tried to flash an Android tablet yourself, you have probably come across the concept of “Recovery”. Today we will talk in detail about what this thing is, why it is needed at all, and of course, how to enter it.

What is Recovery

Recovery mode is a special boot mode for Android devices that allows you to completely reset the operating system settings, reflash the device, make a backup copy of the entire system or its individual partitions (as well as restore these partitions later) and some other things. At the same time, for this mode to work, the functionality of the operating system itself is completely optional. This is precisely why recovery menu They often turn to us when the device no longer works normally. And this is precisely why this mode is called “recovery” (from English “recovery”).

How to log into Recovery

To boot recovery, the device's hardware buttons are usually used. The most common combinations are:

However, some manufacturers may come up with “something like that,” so you have to search and experiment.

If everything is done correctly, a lying robot will appear on the device screen, on top of which there will be a menu with commands.

Another way to download recovery is through special applications, with which you can reboot your smartphone or tablet into recovery mode directly from the operating system itself (for example, Reboot menu). However, it is worth keeping in mind that these applications require availability to function.

Navigation in recovery mode is carried out mainly using the volume buttons, and selection using the power button. There are also devices in which only the volume down button is used for navigation, and the volume up button is used to confirm the choice.

To all of the above, it is necessary to add one important detail. The functionality of the recovery mode itself is by no means universal, and can differ quite significantly depending on the device. Particularly distinguished in this sense are “noname” tablets from China and some B-brands, whose recovery does not have any list of commands at all.

Mobile operating systems are not as reliable as they might seem. Error "No command" Android is a clear example of this. A fallen brand with a red triangle completely paralyzes the smartphone and nothing can be done with it.

Causes of the “No Command” bug

The reasons for the bug are quite critical damage OS or internal modules. Only something very serious can cause the operating system to crash. Sometimes users themselves are to blame, as they tried to reinstall the OS using files with dubious firmware. The fault may be a defect or a normal technical breakdown during operation of the device.

Error "No command" in Android

How to fix the "No command" error

Before you do what is described below, you should apply all the simplest steps - reboot by removing the battery, memory cards and SIM card.

Method No. 1 - reset to factory settings

When turning your phone into a brick, you can try to restore the manufacturer's settings. There are many options for these actions, but we need the option with a dead smartphone. Eat special team, designed to remove such bugs.

Method No. 2 - Flashing

This is an extreme, but effective solution when you see that your Android is with an exclamation mark, and Hard Reset does not help. If you have not made similar OS changes before, then trust flashing phone to someone more experienced. You can try installing the latest OS release or, on the contrary, roll back. If something goes wrong after reinstalling change version and the source of your software. Nowadays there is really a lot of low-quality content.

• In dead phones, the firmware file is transferred to the phone's memory using USB cable via a computer, followed by activation of the installation. There is enough information on this matter on the Internet.

Breaking

All devices break down. In such cases, you need to either try to identify the cause yourself or contact a service center. What can be checked: removable memory cards, closed contacts on connectors, battery, correct assembly of all parts, moisture. If you suspect serious defects, you should seek advice from specialists.

Regarding the battery, it is worth mentioning that sometimes it is enough to just pull it out and insert it. There are references to solutions through its complete replacement, when the old one has already exhausted its working resources. If the device gets wet, it is better to immediately buy a new battery.

More solutions

• Checking the device for viruses. Modern smartphones They are susceptible to them very well, so antiviruses are becoming more relevant than ever; after resetting, you should immediately check them.
• Try starting the device later. Let's say bet on charging and turn it on in a couple of hours;
• Dry or clean your smartphone. Various third-party elements in the housing easily lead to short circuits.

Conclusion

From what was described above, it is worth drawing one conclusion - the “No command” error on Android is written only during serious problems, so formatting the phone, flashing and repairing are the main recovery methods. I hope you understand what to do with the “No Command” problem in smartphones and tablets. Huge request- if you have another solution, describe it in the comments.

There are quite a lot of problems associated with the operation of smartphones, tablets and other devices on which the Android system is installed. One of the most common and at the same time difficult problem is when a notification about the absence of a certain command is displayed on the device screen. What should the user do in such a situation?

Possible reasons

There can be quite a few reasons for this behavior of the device, which, however, does not complicate the process of solving it in any way.

A whole list of manipulations with the smartphone can act as factors contributing to the appearance of such an error. These include:

• Smartphone software or OS update that did not complete properly;
• , during which problems occurred;
• Memory damage and other technical problems of the smartphone caused by falling, flooding and other typical incidents.

By itself, the cause of the breakdown is unlikely to help solve the problem, but it will help avoid the occurrence of similar problems in the future.

Solving the problem

When the command error no android appears, what should the user do in such a situation? There is no need to find out the exact reason that led to such unpleasant consequences. It is enough just or, in some cases, to reflash the phone. The reset procedure is quite simple and is implemented very similarly in all modern devices. To do this you should:

1. When you turn on the smartphone, hold down the volume button, after which the menu will open
2. In it, select the WIPE data factory item, after which a reset will occur.
3. Sometimes, during the procedure, the smartphone may “ask” what to do with the user’s data. In most cases, they must be removed for the device to function correctly.

The flashing process is somewhat simpler than resetting, however, it also has its pitfalls. These include the need to fully charge the smartphone to avoid turning it off during manipulation. As a rule, updating the firmware is carried out using standard tools, supplied either with the product on disk, or presented on the website of the device manufacturer.

If your smartphone runs on the platform and you connect to the Internet via Wi-Fi, you may encounter a display problem exclamation point next to the usual Wi-Fi icon. What does it mean? How to solve the problem and is it necessary to do it? Let's start with the fact that the symbol "!" indicates that it would be a good idea for you to find out more about the wireless network that you decide to use - the warning is associated with it. There may be many solutions to this problem, but so far we have found the only way that really works.

So, the problem is related to the wireless network. To solve it, we propose install static IP address for this particular Wi-Fi connections. This means you need to know the available address in local network, gateway address and DNS addresses (DNS1 and DNS2) for the network. For the latter, you can use the default Google DNS addresses 8.8.8.8 and 8.8.4.4. We're not saying this is the best solution, but it works.

Procedure:

It is quite possible that you will have to perform these steps repeatedly - for each of the wireless networks that you use. But usually updating the operating system to

It happens that when you turn on your smartphone or tablet, a sad picture appears: a green Android with an exclamation mark that appears directly from its “stomach”.

What's the problem?

If this happened, then it is definitely software problem. A common failure of the operating system. Of course, in most cases, it was you who had a hand in this.
But this is a fairly popular and widespread problem, don’t worry, now we’ll try to solve everything on our own without any workshops or certified service centers.

How to fix

In fact, there are as many as two simple ways solutions to this problem.
The first method is that you need to go into Recovery (a special mode for entering the bootloader, analogous to the BIOS). To do this, you need to turn off the device, and then hold down the Vol (-) and Power keys. In some cases, the combination may be different, for example, Vol(+)+Power, Vol(-)+Home+Power, Vol(+)+Home+Power and so on.

As soon as you enter Recovery mode, you need to select the Wipe data/factory reset option, but what you need is a factory reset, that is, a reset to factory settings. If you do wipe data specifically, then everything will be deleted.

The second method is to reflash your smartphone or tablet. It is more complicated, since here you will have to look for both the firmware and the flashing utility, unless, of course, you flash it via Recovery. You can even use the stock (standard) Recovery for flashing the firmware if you have the official firmware for the SDCard.

Nothing works out

If you cannot cope with the problem of the exclamation mark being displayed when you turn it on, then you can contact free help to the RuleSmart forum, in the Android first aid section. They will help you there, specialists respond daily to everyone, but describe the problem in detail, and also in a respectful tone; we hope there is no need to explain here?

What to do if Android has an exclamation mark? In this article we will look at the main causes of device malfunction and ways to solve it.

The first version of the Android operating system appeared in 2008. The presence of a large number of functions, ease of use and low price compared to analogues made it accessible to a wide range of users. It is not surprising that issues related to long-term and uninterrupted operation of devices running this operating system are very relevant.

An icon on the screen in the form of an android with an exclamation mark indicates a malfunction in the device software. It may be associated either with the installation of an unlicensed program, or with a virus infection.

Photo: Android lies with an exclamation mark

Typically, a user may encounter such a problem when turning on (rebooting) a smartphone or tablet. If this happened to you, what can you do?

The first thing they offer in such cases is. To do this, you need to turn off the device, if necessary, charge it to 100% and turn it on in the developer menu mode. Since the key combination depends on the smartphone or tablet model, we recommend that you refer to the instructions. In the standard case, this can be done by simultaneously holding down the power, volume down and (or) Home buttons.

In some cases, after this action, the smartphone can return the factory settings automatically, but sometimes this must be done manually. Remember that in this state only the buttons work (you won’t be able to use the sensor). To move up and down menu items, you will have to use the volume keys. In the list, you need to select the “Wipe data/Factory reset” position with the Power or Home button, which means “delete data/reset settings” and confirm your choice in the next window that opens.

Photo: Hard reset menu

The main disadvantage of this action is that it will remove everything from your device that is not factory settings. And these are contacts, messages, photos, audio and video recordings and programs you installed. Therefore, if you do not want the safety of your data to depend entirely on one electronic device, make backup copies in advance.

If you are not sure that you can cope with this task yourself, it is better to contact a specialist, because any mistake can lead to catastrophic consequences.

If the “USB debugging” function is enabled in the Android settings, you can reflash the device.

Photo: USB debugging Photo: USB debugging

Unpack the already downloaded folder with the program on drive C. Check for downloaded drivers for your smartphone and install them if they are not there. Turn off the device, use a key combination to enter it into firmware mode and use a cord to connect it to the computer. Next, follow the instructions of the program.

If you have not connected the ability to debug your smartphone via a USB cable, consider another option: reinstall software using the device itself and a flash card. To do this, you will have to return to the previously described menu again, selecting the option to restore using SD.

Photo: Flashing Android

In both options, at the end you will have to reset the system again to the original settings.

Let's summarize: Android lies with an exclamation mark - this is not an easy problem, but it can be solved. If you don't want to deal with it often, be careful about what you download to your device. Be sure to install.

You can fix the problem either yourself or with the help of a specialist by resetting the settings or reinstalling the software.

Dear readers! If you have any questions or comments on the topic of the article, please leave them below.