Any driver knows such a phrase as computer diagnostics. And, probably, every motorist at least twice a year goes to diagnose his "iron horse". Everyone knows how long it takes to first wait for your turn at the service, then also the diagnostics of cars of the Lada family costs from 500 to 2000 thousand, depending on the choice of the diagnostic area and on the equipment in the service. But it’s good if the error came out when you are in the city, then you can go to the service in time and find out about the problem with your car. Now imagine such a moment, for example, you went out of town for barbecue, and then unexpectedly for you the check lights up and the car stalls. And now you are standing in the middle of the road, and you do not know what to do. It's not pleasant, you see. Therefore, you need to think through everything in advance, and install an indispensable electronic assistant. And this electronic assistant is an on-board computer. After all, with the help of the on-board computer, you can find out all the errors and erase them, thereby removing the check from the instrument panel. But that's not all, because the on-board computer has so many functions that you never dreamed of. Especially for you, we have prepared a list of on-board computer functions that every driver needs.

• Notification of the replacement of consumables such as: oil in the engine and gearbox, as well as all existing filters, etc.
• Set the required temperature for turning on the engine cooling fan.
• Accurate engine speed.
• Throttle opening percentage.
• Correct all kinds of sensors on your car.
• See the exact readings of the remaining gasoline in the tank.
• Also see how much gasoline is spent per 100 km, or during the trip.
• You can set an alert for overspeed and overspeed of the engine.
• Also, the computer will promptly notify you of errors, and you can erase them from the ECU memory in time.
• And also for tuning lovers there is a great function, like showing the acceleration time to 100 km / h.

Attention: The list of functions may vary for each specific model of the on-board computer.

On-board computer comparable to a personal computer. After all, the on-board computer also has RAM, which works when the car is running, and the BC writes current data to it. There is also a permanent memory device, that is, when you turned off the engine and even disconnected the battery, but the on-board computer, after resuming the supply of voltage, gives out all the same settings. As you can see, the similarity with a personal computer is obvious. Only all the details of the on-board computer for Lada Kalina are made in miniature, unlike a personal computer. We got acquainted with the device and functions of the on-board computer, now let's move on to installing it on a LADA Kalina car.

Instructions for installing an on-board computer on a Lada Kalina car:

1. It is necessary to de-energize the vehicle by disconnecting (+ and -) battery.
2. The first step is to remove the fuse cover on your car.
3. The ashtray needs to be removed.
4. Next, you need to install the BC instead of the fuse cover.
5. Insert the block to connect the BC to the vehicle's on-board network.
6. Next, you need to connect the wires from the on-board computer.
7. Two connection options are possible here: using special clamps that are compressed and pierce the wire sheath, or by removing the contact from the wire block and inserting the BC contacts.
8. So look at the contents of your connection kit and decide which method is right for you.
9. If you have the first method of connecting using clamps, then there is nothing complicated, just put the necessary wires in the cells in the clamp and press it so that the teeth cut through the wire sheath.
10. But if your on-board computer is connected using the second method, then you need to stock up on a thin needle and a lot of patience .
11. It is necessary to press the retaining tab on the contact and pull the wire so that the contact comes out of its place.
12. Next, you need to insert the contacts from the BC into the block that is on the car, and insert the contacts that you took out into the plastic blocks from the BC.
13. As you can see, the first method is easier, therefore, more and more often, manufacturers complete their BCs with wiring not with contacts, but with clamps.
14. Now let's move on to connecting.
15. In order for you not to get confused with the connection to the block, we specially lay out the connection diagram for you. On the diagram, everything is drawn in detail what to connect where. (Scheme No. 1)
16. You should have three wires left.
17. They need to be connected to the instrument panel wires.
18. In order to make it more convenient for you, you need to remove the instrument panel and look for the necessary wires in the cable cable going to it.
19. Connect orange to pin 8 on the connector, this is a yellow-red wire.
20. And brown to pin 11, this is a gray wire.
21. Next, you need to connect the pink wire from the BC (fuel level sensor) to the pink wire of the gray block in the mounting block. Gray block contact No. 13.
22. Then connect the battery and calibrate the BC settings, update the firmware if necessary.

Attention: The wiring diagram may differ depending on different models BK Lada Kalina. If you do not have the skills in the repair of motor vehicles, we strongly recommend that you contact a specialized car repair service.

As you can see, if you strictly follow our instructions, you can literally install an on-board computer in one hour.

But if you still have some doubts about the choice of products. Or you would like to clarify some details on the order. We are always glad to communicate with you!

Lada "Kalina" is equipped with a simple on-board computer, the functions of which are quite enough for normal use. The on-board computer displays 9 indications on the screen - one, in the upper line, is displayed constantly, the rest, in the lower one, can be selected. Let's take a closer look at all of these indications.

The top line displays the total mileage of the vehicle in kilometers.

In the second line, the display information can be selected. This process is controlled using 3 buttons located on the right stalk:

The "RESET" button can reset some parameters, the remaining buttons are responsible for scrolling them (up / down).

The first parameter is the time in 24 hour format. To set the clock, hold down the "RESET" button until the dial starts flashing. Now, scrolling down, set the hours, up - minutes. After setting, briefly press "RESET" to exit to the main menu.

The next parameter shows how much fuel was consumed by the vehicle during the last trip. This setting must be reset before leaving. I did not zero it for about a month, so he counted 140 liters.

The next item on the on-board computer is the average speed of the last trip. It also needs to be dropped. If this is not done, then it will consider the average speed for all the time since the last reset. On average, this figure is 30-40 km / h.

The next parameter displays the number of kilometers that you can drive on the remaining gasoline in the current driving mode.

The next indicator displays the time spent on the road. The countdown starts from the last reset.

Well, the last parameter shows the temperature of the air overboard.

On-board computer STATE "Kalina" XD designed for cars Lada Kalina VAZ 1117-18-19.

A trip computer with two independent odometers and consumption counters, as well as with the ability to view previous parameter values ​​(before reset) for one type of report.

For the first time on the market on-board computer with DST function!

• Non-volatile clock with a calendar, the clock continues to run after a complete power outage from the BC.

• A diagnostic tester that allows not only reading errors and operating parameters of the ECM, but also reading errors of other electronic components of the car.

The on-board computer has a flash-memory for recording data received from the ECM about the operation of the engine, with the possibility of transferring them to personal computer for analysis.

• Voice accompaniment and polyphonic melodies.

The BC has inputs DSA, SRT, a sign of the inclusion of gas-cylinder equipment for separate accounting of the consumption of gasoline and gas.

• Implemented the ability to program the functions of the "CLOCK" and "FAVORITE FUNCTION" buttons.

• PLASMER functions (drying and warming up of spark plugs for cold start of the engine)
• TROPIC (automatic control of the cooling fan when the engine temperature reaches a user-defined temperature),

And also many other functions.

Equipment:

• On-board computer 1 pc
• Wiring harness 1 pc
• Installation and operation manual 1 pc
• Warranty card 1 pc
• Packing 1 pc
• Clips 5 pcs

Warranty for STATE "Kalina" XD 1 year.
The warranty starts from the day the customer receives the goods.
.
In case of failure of the device, please contact our managers, they will help or tell you how to fix the problem.

Attention in case of an attempt to independently intervene in the design of the device to solve the problem, the device is automatically removed from the warranty, in this case device repair is paid

Fundamental difference State "Kalina" XD from State"Kalina" 118x5m:

1. Kalina State XD has advanced diagnostics, i.e. diagnoses
a) Electrical package
b) ABS system
c) Engine (for deluxe version)"Kalina" XD the best option).

2. "Kalina" 118x5m only has engine diagnostics.

When ordering, specify the color of the on-board computer: black or gray.
Made in Russia, Togliatti
Manufacturer: State LLC

• Two independent mileage and consumption counters,
• Ability to view previous parameter values ​​(before reset) for one type of report.
• Eight multi-displays (MD) with a variable set of parameters and one multi-display with a change of parameters in automatic mode depending on current conditions.
• The BC has a "TAXI" mode, which allows you to display the cost characteristics of the trip and the cost of fuel consumed.
• The BC has a "DYNAMICS" mode that allows you to measure and display the dynamic characteristics of the car.
• Implemented the ability to program the functions of the buttons "CLOCK" and "FAVORITE".
• Cooling fan control channel selection for post-2008 release controllers.
• Functions PLASMER (drying and warming up of spark plugs for a cold start of the engine), TROPIC (automatic control of the cooling system fan when the engine temperature reaches a user-defined temperature)
• FORCING (resetting the controller learning memory when switching "petrol" / "gas", leading to the state of the initial factory settings for gasoline with an octane rating of at least 95).
• Alarm for critical events, as well as warnings about the end of the insurance period and the need Maintenance

As well as many other features:

• current time
• Instant fuel consumption
• Gasoline level in the tank
• Mileage forecast on remaining gasoline
• Vehicle speed
• The average consumption of gasoline (from the group "PARAMETERS OF THE CURRENT
• TRIPS")
• Average speed (from the CURRENT TRIP PARAMETERS group)
• Travel time (from the "CURRENT TRIP PARAMETERS" group)
• Passed (from the group "PARAMETERS OF THE CURRENT TRIP")
• Gasoline used (from the group "PARAMETERS OF THE CURRENT
• TRIPS")
• Engine temperature
• Engine speed
• Throttle position
• Ignition advance angle
• Voltage in the on-board network
• Mass air flow
• Voltage on dat. oxygen number 1
• Voltage on dat. oxygen number 2
• Intake air temperature
• Hourly fuel consumption
• Injection duration
• Regulator position XX
• Taximeter
• Gas consumed (from the group "PARAMETERS OF THE CURRENT
• TRIPS")
• Average gas consumption (from the group "PARAMETERS OF THE CURRENT
• TRIPS")
• Passed on gas (from the group "PARAMETERS OF THE CURRENT TRIP")
• Passed on gasoline (from the group "PARAMETERS OF THE CURRENT
• TRIPS")
• Tank gas level
• Mileage forecast on remaining gas
• Acceleration time
• Achieved speed

Compatible with controllers:

• BOSCH M7.9.7, ME17.9.7 (E-gas); JANUARY 7.2;
• ITELMA/AVTEL M73, M74 (E-gas) and their modifications.

• Rated supply voltage, V 12
• Operating supply voltage, V 10-16
• Average current consumption
• when indication is on, mA 200
• when the indication is off, mA< 20
• Clock rate accuracy, s/day ± 10
• Working temperature, °С -40...+85
• Guaranteed indication temperature, °С -25...+70
• FLS input voltage, V 0-8
• Exchange protocol K-line/KWP 2000
• Weight, g, no more than 190

Konstantin, hello. On-board computers with a beige case are not, and will not be. They are out of production. Produced in black only. The manufacturer says that now there are black panels. Demand fell on gray computers and they removed them. If you buy a computer from us - there will be the most latest version firmware.

Chabanov Maxim Vasilyevich / 2016-01-31 21:11:32

Hello, is there a beige BC available? And is it possible to find out the latest firmware version on it or not?

Konstantin / 2016-01-27 10:39:48

Simon - hello. For these questions, please contact the manufacturer's technical support by toll-free tel. 8 800 33 33 163

Chabanov Maxim Vasilyevich / 2015-09-07 07:44:56

Hello! There is a problem in measuring the remaining fuel in the tank. I set the voltage from the fuel gauge at empty (0.00V) and full tank (11.75V). Tank capacity 50 l. But the BC cannot normally read the signal from the sensor. That is, even with a full tank, there can be a value of 0 volts, and with an almost empty tank, overestimated values. As a result, the balance always shows 50 liters. The fuel gauge on the instrument panel does not jump. I focus on it and have never been deceived. There is still a problem. The clock does not show the number. Time, month and day of the week are normal. And the number is shown "00". If you put for example "05", then in a day it will be "00" again.

Semyon / 2015-09-06 09:57:20

To the user Cheikin Vladimir Mikhailovich. Hello. Most likely, the BC gradually fails, a program failure is possible. To eliminate the failure, if any, we recommend disconnecting the power supply from the beginning, for about 5 minutes. If this does not help, activate the "Reset to factory settings" function on it. If this does not help, then most likely it has a mechanical defect (for example, soldering is coming off somewhere). In this case, it must be repaired. Send either to us or to the manufacturer with a cover letter. Through the manufacturer directly, repairs are faster than through us. Warranty for BC -1 year, repair will be free.

Chabanov Maxim Vasilyevich / 2015-01-07 11:06:27

Hello, half a year ago I bought a BC State Kalina HD from you, it worked fine, but recently the image on the display began to disappear periodically, that is, then no, the rest of the BC functions work fine, there are backlights and voice information, tell me what could be the reason?

Cheikin Vladimir Mikhailovich / 2015-01-07 09:23:49

Hello Ildar Fargatovich, for delivery - upon receipt by mail. Thank you!))

Chabanova Alexandra Alexandrovna / 2014-09-18 10:25:55

Hello! for delivery by mail through a qiwi wallet, I have to yell immediately or at the post office. Thank you!

Khadiullin Ildar Fargatovich / 2014-09-17 20:26:54

Hello Vitaly Valerievich, you shouldn't. We sell them in dozens, such a complaint for the first time, but theoretically it is possible. On this issue, it is better to contact the manufacturer directly at the number: 8-902-299-41-05.

Manager Vlad / 2014-09-01 09:28:51

Question: can the BC, after connecting, give a tip on the immobilizer lamp, after connecting with the ignition off, it began to burn at full heat?

Maklashevich Vitaly Valerievich / 2014-08-30 12:03:41

Hello Vitaliy, you do not need to adjust the FLS, but teach your BC how much fuel is in the tank. The instructions for the BC describe the learning process.

Manager Vlad / 2014-08-27 09:12:18

Good afternoon! Tell me, after installation, as I understand it, is it necessary to correct the FLS with an empty and full tank?

Vitaly / 2014-08-27 09:03:53

User Max. Hello, the warranty for the BC from the manufacturer is 1 year. You can install with us in Togliatti. We do not have our own service center, but we can send them to partners.

Account Manager / 2013-10-02 12:40:12

Good evening! Question: what is the guarantee, how much, and where can I install it (do you have your own service center) not far from Samara? Thank you.

Maxim / 2013-10-01 22:06:33

User sergey. Hello, both BCs are suitable, the difference between them is only in the possibility of diagnosing an electrical package, which is available in Kalina XD.

Account Manager / 2013-10-01 15:32:12

For Kalina, 2007 onwards, without ABC, which BC X-5M or XD would you recommend?

sergey / 2013-10-01 13:05:37

For Dmitry O. Hello! In addition to the grants and the price, there is also a difference in the displays, the 620 OLED display is super contrasty and does not freeze.

Pochitalin Alexander Alexandrovich / 2013-06-17 23:50:17

Hello. What is the functional difference between BC Kalina XD and unicomn 620, except for the price and the fact that the latter can be put on a grant? Thanks in advance.

Dmitry O. / 2013-06-17 19:53:11

The user Maxim Officials can withdraw from the warranty due to any additional equipment. So if the car is under warranty, then it is better to contact the officers. And so we do not oblige the installation at a special center.

Account Manager / 2013-03-05 11:05:02

Victor, please tell me, can I connect the BC myself, or do I need to contact the officials (the car is under warranty) and they won’t remove me from the warranty?

Non-volatile clock with a calendar, the clock continues to run after a complete power outage from the BC.
A diagnostic tester that allows not only reading errors and operating parameters of the ECM, but also reading errors of other electronic components of the car.
The on-board computer has a flash-memory for recording data received from the ECM about the operation of the engine, with the possibility of transferring them to a personal computer for analysis.
On-board computer with text display (16 characters x 2 lines) and various backlight colors. Voice accompaniment and polyphonic melodies. The BC has inputs DSA, SRT, a sign of the inclusion of gas-cylinder equipment for separate accounting of the consumption of gasoline and gas.

On-board computer STATE "Kalina" XD designed for cars Lada Kalina VAZ 1117-18-19

1. "Kalina" XD it has advanced diagnostics, i.e. it diagnoses the electric package, ABS system, fuel system and the engine as a whole (it is the most optimal for a luxury package).

2. "Kalina" 118x5m has only fuel system and engine diagnostics

Compatible with BOSCH M7.9.7, ME17.9.7 (E-gas) controllers; JANUARY 7.2; ITELMA/AVTEL M73, M74 (E-gas) and their modifications.

A trip computer with two independent odometers and consumption counters, as well as with the ability to view previous parameter values ​​(before reset) for one type of report.
Eight multi-displays (MD) with a variable set of parameters and one multi-display with automatic parameter change depending on current conditions.
The BC has a "TAXI" mode, which allows you to display the cost characteristics of the trip and the cost of fuel consumed.
The BC has a "DYNAMICS" mode that allows you to measure and display the dynamic characteristics of the car.
Implemented the ability to program the functions of the buttons "CLOCK" and "FAVORITE".
Cooling fan control channel selection for post-2008 release controllers.
Functions PLASMER (drying and warming up of spark plugs for cold start of the engine), TROPIC (automatic control of the cooling system fan when the engine temperature is reached, set by the user), FORCING (resetting the controller learning memory when switching "gasoline" / "gas", leading to the state of the original factory installations for gasoline with an octane rating of at least 95).
Critical event alarm as well as insurance expiration and maintenance alerts

Specifications:

• Rated supply voltage, V 12
• Operating supply voltage, V 10-16
• Average current consumption
• when indication is on, mA 200
• when the indication is off, mA< 20
• Clock rate accuracy, s/day ± 10
• Working temperature, °С -40...+85
• Guaranteed indication temperature, °С -25...+70
• FLS input voltage, V 0-8
• Exchange protocol K-line/KWP 2000
• Weight, g, no more than 190

Equipment:

• On-board computer 1 pc
• Wiring harness 1 pc
• Installation and operation manual 1 pc
• Warranty card 1 pc
• Packing 1 pc
• Clips 5 pcs

Not included. AT this material we will talk about how to modernize the control system of the "State XD" installation.

Installation instructions "State XD"

Before proceeding with the installation on-board computer to Kalina be sure to read the wiring diagram.

1. Disconnect the negative terminal from
2. We unscrew the four screws securing the ashtray and take it out
3. We find the contact block for turning on the alarm and take it out. It is to her that the main "XD State" will take place

Connecting the contacts of the on-board computer "State XD"

All the described actions are performed on the alarm switch block

1. We remove the orange wire from pin 7 and install the red-white wire from the BC harness in its place.
2. In a single connector of the red-white wire, we install the removed orange
3. We disconnect the red-black wire from pin 10, and in its place we put the red wire from the BC harness
4. In a single connector of the red wire, we install the removed red-black
5. We disconnect the black wire from pin 5 and in its place we install the black wire from the BC harness
6. In a single connector on the black wire of the BC harness, we connect the removed black
7. Disconnect the white wire from pin 8 and install the white wire from the BC harness in its place
8. In a single connector of the white wire on the BC harness, we install the removed white
9. Using electrical tape, we fix the wires and stretch the BC harness through the inside of the console to the on-board computer installation site

How to connect the fuel level sensor to the on-board computer "State XD"

After the main connection of the BC, it is necessary to connect the fuel level sensor. We need a pink wire, which must first be passed through the inside behind the instrument panel.

It is also necessary to remove the fuse mounting block, which is located on the console to the left of the driver's seat.

In the depths, behind the block is a large gray block. From the back side, a pink wire approaches the block, through which a signal is sent to the fuel level sensor of the instrument panel. Then you need to connect the pink wire of the BC to it.

Connecting BC "State XD" to the on-board network

After the above manipulations for connecting your on-board computer, two wires "gray" and "blue" remained on Kalina.