Home / Internet / Does it make sense to buy a car radio with a GPS-navigator? How to connect the navigator to the head unit? Connect navigation to the radio by av

Does it make sense to buy a car radio with a GPS-navigator? How to connect the navigator to the head unit? Connect navigation to the radio by av

So, the task is to equip the Lada-Kalina with a navigator built into the front panel. How much? We decided to set a strict limit - 10,000 rubles for everything. Let's see if we can fit into this framework. The first round of searches upset: there are a lot of offers, but prices, as a rule, start from 15,000 rubles. In addition, most devices are designed for a large 2DIN socket. However, suitable still found. At first they wanted to buy the one with a screen that slides out of the case. But we realized in time: then, with the radio turned on, we will lose access to the climate knobs. Taking into account this ergonomic feature of Kalina, we opted for the model Prology MDN-1360T with 3.5" touchscreen, two memory card slots, USB port, Bluetooth and DVD viewing. I was tempted that the monitor is located directly on the front panel, which means it will not overlap the controls. Not the last factor was the price - 9500 rubles. We fit in! But, alas, the joy subsided rather quickly. Problems began even during installation: the device turned out to be several millimeters wider than the socket. I had to expand the "hollow" with a file. After that, things went more fun: the usual installation of the frame, the connection of wires. In addition to the usual procedures, it was necessary to lay a thin microphone cable (the radio tape recorder can be used to talk on the phone by connecting them via the Bluetooth wireless protocol). Not immediately found a place for the GPS antenna. In theory, it is better to bring it to the roof, since the magnetic base allows you to fix the “tablet” in a matter of seconds. But leaving a foreign part outside the cabin is dangerous - they will steal it. And put it under the panel - it will be bad to catch satellites.

We decided to bring it right to the middle of the front panel under the edge of the glass. Having finished with the installation (it took about an hour to work), they breathed a sigh of relief: the task was completed. But it turned out that the surprises were not over. Firstly, due to the low location, it is very difficult to see the image on the screen, even standing still. How about watching on the go? However, this is a feature of the Kalinovsky arrangement of devices on the panel. Secondly, another very unexpected and unpleasant feature was discovered: a budget radio can only work in one mode. That is, you will not be able to listen to music and follow the laid route at the same time! The same applies to the speakerphone. But in the advertising booklet there is not a word about it! However, the navigation program works stably, the sound from the speakers is clear, and Prology finds a satellite signal in less than a minute.

Alternative

Now let's check the alternative. Why not spend the same 10,000 rubles on an ordinary removable navigator and radio? After some deliberation for the role of the audio component, we chose the radio JVC KD-G447- the model is not new, but the company has a good reputation, the device can play MP3 files, there is also a USB socket on the front panel. And most importantly, it is inexpensive - 4500 rubles. The remaining money was spent on the model navigator HDC-525. The brand, of course, is not very well-known yet, but the characteristics of the device are not bad: a large 5-inch screen with a resolution of 800 × 480, Bluetooth and FM transmitter, 2 GB of internal memory and a slot for an additional MicroSD card. The next step is installation. It is clear that there were no problems with the navigator: we stuck the holder on the windshield and connected the power to the cigarette lighter (the operation takes a maximum of 30 seconds). With the radio, everything is also simple: in half an hour they inserted a metal frame, fixed it, connected the power and speakers. The goal is achieved: the music sounds satisfactory and the electronic guide does the job. And for all this they gave even less than 10,000 rubles. However, getting out of the car, you have to remove not only the head panel of the “music”, but also the box from the glass. How else?

What is the result?

For a low price you will not get a truly cool and universal device, capable of both playing music cleanly and suggesting the direction. It is better to buy two highly specialized devices for the same money. And let each of them do his job, but do it well.

Not a wealth of choice

But what to do if you can neither order a regular multimedia complex, nor install a foreign radio with built-in GPS? For example, the Ford Focus has a non-standard-shaped nest - does it mean that you immediately run after the “box”?

There is an exit! Carefully study the range of online stores - there are devices made for a specific car (from the aforementioned Focus to relatively expensive crossovers). However, most of them come from China. Yes, and prices bite: on average, they ask for such multimedia centers 20,000–30,000 rubles.

SMARTER AND FASTER

All car navigators are similar in appearance and, as a rule, they are the same in terms of filling. But there are pleasant exceptions. For example, on Russian market devices appeared on new platform SiRF Atlas V. We have already talked about the advantages of this chip - it is distinguished by low power consumption, stability and speed. But most importantly, the InstantFix hardware technology for predicting the position of satellites ensures the search for a signal in the shortest possible time.

One of the first such devices on the Russian market debuted two "lexanda" - Si530 and Si535. Navitel Navigator was used as a software filling, but there are also instances with Progorod and CityGuide. A short acquaintance confirmed: the new "boxes" delight not only with ease of use, but also very operational search satellites. The cost of new products - approx. 4000 rubles for Si530 model and around 5000 for Si535. Most communicators sold in Russia can also be used for navigation. More recently, an unusual hybrid of a phone and a navigator with a 3.5-inch screen appeared on the shelves - “ Garmin-Asus M10". Like many analogues, it works under Windows control Mobile 6.5 equipped Bluetooth modules and WiFi.

A distinctive feature is the Garmin program, fully integrated into the system. With it, you do not need to look for an address in phone contacts or notes, memorize it and enter it manually into the navigation program. Instead, you can simply enter the name of the contact and the route will be generated automatically. Costs M10 in Moscow from 11,000 to 16,000 rubles.

Very often, car owners think about how to get maximum functionality with minimal investment. Let's say your car has a radio that suits you. You just need to purchase and correctly connect a GPS navigator to the radio to get a full-fledged multimedia system with advanced features.

Installation and connection of the GPS GLONASS navigator to the radio

GPS navigator for video viewing

Of course, you will have to pay more attention to the choice of the navigator. It is necessary to purchase a model with the ability to view video files and equipped with a USB or mini USB port. But most modern models have these functions, so the choice will depend on your preferences and capabilities.

You should also pay attention to the size and resolution of the display. The quality of the viewed image will directly depend on these parameters. To watch the video, it is better to stop on devices with a screen diagonal of at least 4 inches.

Connecting an external GPS navigator to the radio - this is a reasonable cost savings. It is rare that someone uses the navigator all the time, but having it in the car makes life easier in many ways. Therefore, you should not refuse this supplement, especially if another application is found for it. And you are freed from the need to purchase a separate display.

We connect to the radio - we get high-quality sound

But the weak point of all navigators is a low-quality built-in speaker. Therefore, connecting a GPS navigator to head unit car is necessary to create a highly functional full-fledged multimedia system. You have the opportunity to use the navigator to choose a route or orientation in an unfamiliar area, and your passengers will enjoy watching the video throughout the journey. The quality of sound and image will not cause complaints.

For first-class work, it is necessary to make a competent connection of the GPS navigator to the radio. This will save you from various sound interference from the receiving antenna. Convenient switching is carried out from the remote control.

In order not to make a mistake with the choice and carry out a qualified installation, contact the Carformer technical center. Our specialists will select a model of a navigator with a TFT display, taking into account your wishes. They will also connect GPS navigation to the car's standard radio. We recommend mounting next to the rear view mirror or on the dashboard. It is in this place that it will be in front of the driver’s eyes and convenient for passengers to watch the video. Screen sizes of 4.3 or 5 inches are the most common, as they have to comfortable viewing videos have good detail and at the same time do not block the view.

Also, if you plan to connect a GPS navigator to the radio in order to watch the video, we recommend considering models with a processor frequency of 600 MHz.

In our center we will also install related software, we will select all the necessary adapters and adapters in order to make a high-quality connection of the GPS navigator to the radio.

carformer.ru

Is it possible to connect the navigator to the car radio

Modern cars are equipped with all the necessary equipment, including a navigator, a camera and other technical innovations. Wireless camera, showing the rear view, can be connected to a navigator with usb, thereby facilitating the process of parking the car. This device is very easy to mount, because no wiring is required. All the necessary information goes over the wireless network.

Do you need a navigator in the car

Especially travelers, couriers, ordinary motorists who often have to travel to different addresses cannot do without a navigator on the way. This electronic device broadcasts a map with markings and laying a convenient route. Besides this device able to determine where the car is at the moment.

The GPS navigation system was developed and launched by the Americans at the end of the last century. Russia has also opened its satellite system - GLONASS.

The navigator looks like a small TV with a color display broadcasting a dynamic map with the terrain. It displays the necessary road and infrastructure signs. There are miniature models with a small display. The largest display can be 7.5 inches. The screens have a low resolution, but the graphics are displayed well.

Do I need the Internet for a navigator

The navigation device works better if it has wireless communication wifi, bluetooth. This makes it possible to connect additional devices headset type, mobile phones, rear view cameras. Wi-Fi is required for independent use of the Internet, downloading maps.

The camera is installed using a wireless transmitter connected with two cables. The black wire runs through the body of the car, and the red wire goes to the rear light. Bluetooth can be used to connect the camera to a navigation device.

If you connect a navigator to a video camera, you can save money, because you will not need to purchase an additional monitor; you don’t have to clutter up the space; it will be easy and simple to operate.

The camera is connected to the navigator using a 12V cable, a tulip.

Is it possible to use iPad, netbook as a navigator?

The rear view camera can be connected to the following equipment:

  • Navigator with monitor. In order for the video signal to be transmitted, you must have an RCA adapter, a wireless module;
  • Tablet, iPad;
  • Monitor with a torpedo. Installation of this equipment can be made in any place convenient for viewing;
  • Netbook;
  • Rear view mirror, monitor;
  • Staff radio.

Can be used as a navigation device electronic device netbook type with the appropriate program.

Rear view camera features

The rear view camera is universal. It can be used on any car. It should be selected according to the size and resolution indicators. You can get a high-quality picture with a high resolution.

It is convenient to view video information on a mirror that has a monitor. This method is the most optimal and convenient. Thus, there will be a combination mirror image and the picture shown by the parking camera. According to experts, the camera should be installed on the right side, since when the car parks near the right curb, it will be possible to view better view.

First you need to get rid of the upholstery on the luggage compartment, the right C-pillar and remove the tailgate. Then the video camera can be placed in the camera cover. After that, wiring with a tulip is laid.

With a rear view camera, a warning is displayed when invisible obstacles appear on the road from the rear. You can install this electronic system in a special regular place, which was provided by the manufacturer.

Often a camcorder is connected to a car radio. When the reverse gear on the gearbox is engaged, the camera will start to actuate. After all, a camcorder of any model can not function for long. If the device will work constantly, then it will break from this.

When connecting a camera with a radio tape recorder, extreme care should be taken, because an incorrect connection may cause a short circuit and damage to the device.

When connecting the device to the tablet, the installation is performed special program RFK WIFI. When the reverse gear is engaged, the application is launched and the camera displays a picture that is behind the car.

Video: is it possible to connect a navigator to a car radio

realguy.com

how to connect the navigator to the head unit? [Archive] - Passat WORLD - Volkswagen Passat-CLUB

View full version: how to connect the navigator to the head unit?

Good day to all! decided to install a navigator with the ability to play mp3, do you want to connect it to a head unit? who knows, did, tell me pliz.

I want to integrate so that I can listen to mp3

Can you be more detailed? If the navigator has the ability to play MP3, then what for is it also connected to the head unit?

Z.Y. Maybe I'm promoting my music, but! the functionality of the head unit has been significantly expanded now. And all the chips fit. And also an obstacle to the hijackers was formed in a natural way: oops:

And what kind of navigator is that? It's not Glospace SGK-70 by chance, otherwise I opened a thread here, just for this thing, and so in the description of this navigator it says: The navigator's own speaker is not very strong, but you can always connect headphones to it or use an FM transmitter, to stream audio to your car stereo and listen to music through your own car speakers.

Turn on and search as a radio station: mrgreen:

30.12.2007, 01:28

The navigator's own speaker isn't very strong, but you can always plug in headphones or use an FM transmitter to stream audio to your car radio and listen to music through your own car speakers. The speaker on the navigation is usually purely symbolic in order to notify with a voice and, to put it mildly, is not suitable for playing music. I have a headphone output on JJ-Connect, as well as the headphones themselves, and it is possible to connect an FM transmitter via a cord, the current question is why it is needed. Transmitters usually work very well with flashes, and the sound, to put it mildly, is very far from perfect. Another nuance, the presence of music on the SD card implies its constant updating, which sooner or later will lead to failure and errors in reading the SD, I think that I don’t really want to have a hemorrhoid with restoring the software and the chaser key. Navi is Navi, for music it is worth using radio tape recorders.

It is of course IMHO. Here.

Z.Y. The Mitseri company produces radio tape recorders strictly designed "A la original". Maybe worth a look at them?

30.12.2007, 14:43

A friend at work is so perverted. I put a blue-toothed speakerphone, Some kind of parrot, brought the sound to the regular speakers. It connects to the PDA as an external headset, all sounds go through the GS. But there is a problem - the radio is not muffled. That is, both sources work simultaneously.

30.12.2007, 15:30

Spaze Pash, pliz, if it's not difficult to throw a link to Mystery's heads, then what you were talking about above.

Ah, I understood everything. As such, AUX is not found in regular magintolas. Usually. Therefore, we must farm. Either a changer emulator or a cassette player. With separate audio input.

Z.Y. The Mitseri company produces radio tape recorders strictly designed "A la original". Maybe worth a look at them? esli AUX net, togda oboidemsy bez MP3. Thank you all!

Pirogoff, there are two-din ones like: http://mysteryaudio.ru/components/com_virtuemart/shop_image/product/96026e524ee15b668e58197135116aa6.jpg http://mysteryaudio.ru/component/page,s ... /Itemid,7/ (http: //mysteryaudio.ru/component/page,shop.product_details/flypage,flypage/product_id,66/category_id,/manufacturer_id,1/full_image,1/option,com_virtuemart/Itemid,7/) http://mysteryaudio.ru/ component/page,s ... /Itemid,7/ com_virtuemart/Itemid,7/)

http://mysteryaudio.ru/components/com_virtuemart/shop_image/product/a88413315b9a322bc22f6750c47c2a72.jpg

See if this adapter is suitable - http://www.passatworld.ru/phpBB2/viewtopic.php?t=45419

Powered by vBulletin® Copyright © 2017 vBulletin Solutions, Inc. All rights reserved. Translation that you can say:

PassatWorld.ru

Navigation input

    18.04.2013 19:40 #1

    Hello. Help me to understand. When selecting radio tape recorders on the Yandex market, many models (for example, Sony XAV-741, Kenwood DDX3053, Pioneer AVH-1400DVD) do not have built-in gps, but there is an "Input for connecting a navigation system". This is explained as follows: "The presence of an input for connecting a navigation system. A navigation system is connected to this input, and the monitor built into the radio displays data from the navigation device. This is quite convenient, since the display of the radio is usually larger than the screen of the navigation system. "

    Useful Topics:

    18.04.2013 19:40 # 0+

    1. Pay attention to the list of useful topics in the first post.
    2. Terms and most popular models in messages are highlighted with quick tips and links to relevant articles in MagWikipedia and the Catalog.
    3. To study the Forum, it is not necessary to register - almost all profile content, including files, pictures and videos, is open to guests.

    With best wishes, Administration of the Car Audio Forum Magnitola

    18.04.2013 21:27 #2

    Posted by techno007

    Actually the question is, what kind of navigation systems do you mean? Thanks in advance for your reply

    All brands (not Chinese) that have this input for GPS navigation control their own navigation device - SONY - only SONY, the other will not support this trouble: SONY will not be able to work with PIONEER, as well as vice versa (universals are not made in the prestige of the brand and brand) - something like this.,

    18.04.2013 22:32 #3

    Gena60, Clearly, thanks for the clarification. Those. 2x din non-Chinese with navigation and normal work with flash drives (apparently Pioneer SPH-DA100 has problems with this) is cheaper than 18t.r (Pioneer AVIC-F940BT)? And is there an option to order abroad?

    18.04.2013 23:22 #4

    Mirkom 500, phantom navigation box, bion.. there are several more options. The wp9900 from wondeproud.com is especially interesting. The only trouble is that these options will not be cheaper than the mentioned option.

    19.04.2013 12:15 #5

    Posted by restrict techno007, Mirkom 500, phantom navigation box, bion.. there are a few more options. Of particular interest is wp9900 from wondeproud.com

    The only trouble is that these options will not be cheaper than the mentioned option.

    Thanks for the info. In general, there are more budget models with normal gps work?

    19.04.2013 14:16 #6

    Posted by techno007

    In general, there are more budget models with normal gps operation?

    Radio? It seems, even, everything works fine in Mystery .. There is a problem with sound quality, often. PS: And some, in general, write with boiling water from Chinese substitutes for MSU, better known to us under the brands phantom, concorde, etc.

    19.04.2013 14:28 #7

    Posted by restrict

    Radio?

    No, I meant the external navigation blocks that you suggested in the previous post.

    19.04.2013 14:41 #8

    Posted by techno007

    external navigation blocks

    They all work quite well. Glitches happen, but the number is at the level of a regular autonavigator. The cheapest option is to order from China using the above link.

    19.04.2013 19:55 #9

    Posted by restrict

    Gena60, You would understand what you advise.

    Did you read post number 1 carefully? He didn’t give advice on the issue of the author of the topic, but explained the presence of inputs for GPS in branded GUs and GPS control from the screen only with his brand block. If you mean viewing the navigation picture on the screen, any DVD can use this video input device, even a TV (if it is not a BW of the last century) - navigation control will only be from the function buttons (remote) of the acquired navigation separately from the brand of another company. sound or functionality, the user chooses by defining the task for his requirements in different GU classes - if the presentation is not correct, criticism is welcomed in any volume on the questions and answers indicated in the topic, without restrictions, with the justification of controversial positions.,

    19.04.2013 21:00 #10

    Posted by gena60

    Did you read post #1 carefully?

    Yes. Posted by gena60

    navigation control will only be from the function buttons (remote control) of the purchased navigation separately from the brand of another company

    And here is the controversial position. I gave the names of the prefixes - look in the search engines.

    Since such a booze has gone, I’ll say that I can’t decide on the choice of a cartoon - Pioneer X8500 or JVC KW-NSX700 - both have HDMI INPUTS for connecting smartphones on a bucket, which will completely replace my external Navi module. This is also an option, if that

    PS: And, for example, Sonya and JVC do not release Navi blocks for Russia at all, as far as I know. However, third-party navigation works with them. There are cables for connecting the spt-100 phantom even for Panasonic, which have never seen navigation inputs (although it’s worth recognizing that I saw a whole multimedia panasov)

Setting up a GPS car radio can be done by hand if you know the specifics of the process. The car radio with GPS navigation today is an ideal device for the driver of the vehicle.
This apparatus contains many useful features and options. In order for the device to function without problems, it is sometimes necessary to configure the GPS on the car radio. This is what we will consider in the article.

Setting

So, the correct setting of such a car radio is already a guarantee of normal operation. To carry it out, it is enough to have instructions at hand.
The following is the setup process:

  • The car radio is connected to the network. When connecting, it is recommended to pay special attention to the gray wire marked BRAKE. He is responsible for disabling protection from watching TV and DVD programs while the car is moving;
  • The next wire is also very important. It is labeled AMP-CON. This same wire is responsible for the connection and management of external sources.

Note. If you connect an amplifier through this wire (used for an external radio antenna), then the voltage will be supplied to the source only while listening to the radio, which is very economical and practical.

  • It is advisable to fix the head unit in a regular place, and after starting the setup.

Advice. It is highly recommended that you first carefully study the instructions that come with the kit. It is in it that it will be indicated which software can be used for this model of the head unit. It can be Navitel, IGO, OZI or others.

  • The required software is written to the SD card. If, for example, it will be IGO8, the software that is popular today, then the resolution of 480x234 pixels is set in the car radio through the menu. After that, we insert the map and open the main GPS menu. Select "options".
  • Once in the settings, you need to select the navigation program. But for this you will need to specify the path to the SD card to be launched. Only after that it will be possible to turn on the navigation program.

Note. As for the GPS antenna, it is desirable to put it directly to the windshield.

  • We check the work and if all the settings were used correctly, after a minimum time the navigator (see) should determine your location.

Note. It is worth noting that today there are car radios that support the ability to function in GPS multimode. This gives the right to listen to music and use the navigator at the same time.
If your car radio has this feature, press and hold the GPS key to turn it on. When Normal/Multi appears on the display, the mode is enabled.

Overview of the car radio Timeless TID 9301

Consider one of these car radios.
It differs in the following technical characteristics:

  • The screen of the device is motorized by 7 inches. Has a resolution: 1440x234 pixels;
  • GPS navigator built into it head device;
  • The car radio supports ipod(see);
  • It has an AUX jack on the front;
  • A radio tuner operating in the FM / AM bands is built into the car radio;
  • It is possible to connect the control to the buttons on the steering wheel;
  • There is a separate exit for the camera;
  • The device comes with a block with wires, instructions, a remote control, USB wires, a mounting frame and special tools for removing the radio.

Connection

Now we will learn how to connect this device. By the same example, you can connect other car radios similar in parameter to this one.
Begin:

  • As in the above case, we ground the gray wire to disable the protection of watching DVD programs;
  • We use the AMP-CON wire, designed to control external sources.

Note. The block of wires that goes in the instructions is an adapter that is inserted at one end into the head unit, and at the other end is connected to the power source. On this, so to speak, external end there is always a Euro connector, which is incredibly convenient for connection.

In addition to the wires described above, the car radio has built-in connectors for connecting AV wires. In particular, there is an input for Camera IN, where the wire is threaded from rear camera, there are outputs for rear and front channels, audio and video, and so on. AT this case, colored wires are used.

Note. In addition, on the rear panel of the radio there are connectors for connecting to an external antenna for radio or TV, GPS, etc.

The front console of the car radio is a panel where the following components are located:

  • The display is single-line, thanks to which short information is displayed (if the LCD screen is removed). This same display has 7 types of backlight;
  • Here, on the front console, you can find a Bluetooth receiver (see);
  • The OPEN button is provided to open the LCD panel;
  • There is also a volume control, a microphone, an AUX jack and much more;
  • Placed on front console and SD card slot;
  • On the front panel there is also a mode switch knob, and on the right side there is a mini USB.

Interestingly, this very model of the car radio is easily installed on the VAZ 2105. There are no installation problems, although some parts of the torpedo will still have to be cut out.
Knowing how to set up a GPS car radio with your own hands is very useful. You can save a lot of money on the services of specialists, who sometimes bend such prices that it’s scary to think.
The main thing is to do everything according to the instructions, do not ignore video reviews and photo materials.

A radio with a navigator is a solution for a driver who is poorly versed in the area and wants to make a trip with comfort and music, using such a device. Let's figure out together what kind of miracle device it is, how to choose and connect it!

[ Hide ]

Description of radio + GPS

This article will focus on the combination of the radio, which is installed in the car along with GPS. This is a single device that performs both functions at once. Read more about what exactly these functions are, how to reflash and install the device - below.

Pros and cons of devices

Regarding the pros and cons, we can say the following:

In most cases, the benefits are:

  1. High-quality and bright sound without interference.
  2. Good display, sensitive to touch.
  3. Lots of different audio settings.
  4. There is integration with mobile gadgets.
  5. Good sound when talking through the stock microphone.

Some car enthusiasts include the following indicators to the minuses:

  1. Too high price.
  2. Too bright, even at zero, the backlight of the screen.
  3. The search for radio stations is not always successful.

Of course, these disadvantages are individual for different models.

Criterias of choice

There are two sizes of car radios, two standards that differ from each other in size, width and height. Therefore, when choosing a suitable car radio for your car - a device that will last you at least a year - you need to pay attention to the size of the device.

Types of radio tape recorders come down to these two:

  • DIN 1;
  • DIN 2.

The second option differs from the first in increased height, and is found in cars from the manufacturer in Germany, Japan and the USA.


When choosing a car radio, you should be guided by the following rules:

  1. Do not forget that the sound also depends on the music system that is already installed: speakers, subwoofer. Noise isolation also affects the final sound of music.
  2. A car radio with GPS is a purchase that should be dictated by necessity. You should not save on this purchase, because if you buy a radio tape recorder for the minimum cost, it will work for several days, and then it will break.
  3. The same applies to new manufacturers. It is better to turn to firms that have been tested by time. They may cost a lot more, but they are quality products.
  4. It should also be noted that in model range There are several different models with different appearance and feature set. When choosing, you should focus only on the sound, because very often the models sound the same.
  5. - a convenient Din 2 device, which has recently been very popular. With built-in navigation, they cost a little more, but the model can be selected according to personal preferences. Touch screen these radio tape recorders are sensitive, smoothly extend without delays and suspicious noise.

Overview of popular models

The most popular models can be found below.

Mystery MDD-6270NV

This is one of the most popular models, its characteristics are as follows:

  • display diagonal 6.2 inches;
  • there is a digital tuner;
  • built-in player and DVD player;
  • there is an equalizer;
  • sound amplifier;
  • GPS navigator.

Prology MDN-2670T

This model is not much different from the car radio described above. There is also a navigator, a digital tuner, MP3 and DVD players. A good equalizer and sound amplifier (video by Yaroslav450).

Clarion NX502E

Perhaps this is the most popular of the models, it has several interesting characteristics:

  • there is a built-in GPS-module and Parrot Bluetooth;
  • built-in microphone;
  • extensive language settings;
  • 6-channel amplified audio output;
  • there is an input for the rear view camera;
  • The internal memory has the ability to store up to 18 radio stations.

How to flash an audio system with navigation?

It may have its own characteristics, but an approximate scheme of actions is as follows:

  1. First, clear (format) the memory card.
  2. Copy to it pre-prepared software downloaded from a trusted site. This is done using an adapter and a computer or tablet.
  3. Insert map into .
  4. Wait for the download.
  5. After that, press the special mode SYS on the remote control. Then press and hold the SUB-T button for a few seconds. Click on STOP. After that, a desktop with settings will appear.

Article content:

Modern cars are equipped with all the necessary equipment, including a navigator, a camera and other technical innovations. The wireless rear view camera can be connected to the navigator via USB, thus making it easier to park your car. This device is very easy to mount, because no wiring is required. All the necessary information goes over the wireless network.

Do you need a navigator in the car

Especially travelers, couriers, ordinary motorists who often have to travel to different addresses cannot do without a navigator on the way. This electronic device broadcasts a map with markings and laying a convenient route. In addition, this device is able to determine where the car is currently located.

The GPS navigation system was developed and launched by the Americans at the end of the last century. Russia has also opened its satellite system - GLONASS.

The navigator looks like a small TV with a color display broadcasting a dynamic map with the terrain. It displays the necessary road and infrastructure signs. There are miniature models with a small display. The largest display can be 7.5 inches. The screens have a low resolution, but the graphics are displayed well.

Do I need the Internet for a navigator

The navigation device works better if it has a wireless connection, wifi, bluetooth. This makes it possible to connect additional devices such as headsets, mobile phones, rear view cameras. Wi-Fi is required for independent use of the Internet, downloading maps.

The camera is installed using a wireless transmitter connected with two cables. The black wire runs through the body of the car, and the red wire goes to the rear light. Bluetooth can be used to connect the camera to a navigation device.

If you connect a navigator to a video camera, you can save money, because you will not need to purchase an additional monitor; you don’t have to clutter up the space; it will be easy and simple to operate.

The camera is connected to the navigator using a 12V cable, a tulip.

Is it possible to use iPad, netbook as a navigator?

The rear view camera can be connected to the following equipment:

  • Navigator with monitor. In order for the video signal to be transmitted, you must have an RCA adapter, a wireless module;
  • Tablet, iPad;
  • Monitor with a torpedo. Installation of this equipment can be made in any place convenient for viewing;
  • Netbook;
  • Rear view mirror, monitor;
  • Staff radio.

As a navigation device, an electronic device such as a netbook with the appropriate program can be used.

Rear view camera features

The rear view camera is universal. It can be used on any car. It should be selected according to the size and resolution indicators. You can get a high-quality picture with a high resolution.

It is convenient to view video information on a mirror that has a monitor. This method is the most optimal and convenient. Thus, the mirror image and the picture shown by the parking camera will be combined. According to experts, the camera should be installed on the right side, since when the car parks near the right curb, it will be possible to view a better view.

First you need to get rid of the upholstery on the luggage compartment, the right C-pillar and remove the tailgate. Then the video camera can be placed in the camera cover. After that, wiring with a tulip is laid.

With a rear view camera, a warning is displayed when invisible obstacles appear on the road from the rear. You can install this electronic system in a special regular place, which was provided by the manufacturer.

Often a camcorder is connected to a car radio. When the reverse gear on the gearbox is engaged, the camera will start to actuate. After all, a camcorder of any model can not function for long. If the device will work constantly, then it will break from this.

When connecting a camera with a radio tape recorder, extreme care should be taken, because an incorrect connection may cause a short circuit and damage to the device.

When the device is connected to the tablet, a special RFK WIFI program is installed. When the reverse gear is engaged, the application is launched and the camera displays a picture that is behind the car.

Video: is it possible to connect a navigator to a car radio