Every amateur photographer and, even more so, a specialist is familiar with such a concept as negative. The word, derived from the Latin negativus, denotes the opposite, negative meaning of color: clearer places on the film turn out dark, and vice versa. The brightness of the color also changes in the opposite direction, and the pale areas of the image end up being the brightest. Print from negative ov gives the chance to get clearer pictures, to correct some areas of the skin or clothing in the direction of improving them. How to make it from a photograph negative? The program will come to the rescue Adobe Photoshop.

Instructions

1. Open the image you will convert to negative .

2. The next step is to invert the color. Inversion is a change of colors to the opposite, inverse ones. The keyboard shortcut Ctrl + I will help you do this, or you can perform the operation through the menu: “Image – Corrections – Invert” (Image – Adjustments – Invert). You will see that the color of the initial image has changed.

3. Many people stop at the second step, but this is not normal, because negative not completely done. After inverting, you must religiously desaturate your picture. This can be done both from the keyboard – Shift + Ctrl + U, and through the menu: “Image – Corrections – Discolor” (Image – Adjustments – Desaturate). As you can see, the image has become entirely black and white.

4. Next you need to correct the photo. The menu item “Image – Adjustments – Hue/Saturation” will come to support. Here, be sure to check the box next to the “Toning” option (Colorize). Next, use the cursor to change the field values ​​from top to bottom: hue – 209, saturation – 15, brightness remains the same, zero. Click OK.

5. The next step is to work on the relationship between light and shadow: “Image – Adjustments – Shadows/Highlights.” A new image correction window will open. If it's small, click Show More Options at the bottom. Change the tone and light levels to make the image more intense and solid. In the item “Shadows” – Shadows, set the following values: number – 0, tonal range width – 50, radius – 30 pixels. In the “Lights” menu: result – 35, width of the light tonal range – 75, radius – 30. The color correction and midtone contrast values ​​must be minus: color correction must be set on tier – 8, midtone contrast -10.

6. Often when creating negative s the image is turned over. This can be done using the menu item “Image – Rotate Canvas”. Your negative ready.

Photoshop is a necessary graphics program for all occasions, and it will help you even in such a seemingly difficult situation when you need to draw an authentic and realistic-looking seal. Creating a seal is a fast and primitive process, one that will not take you more than 10 minutes.

You will need

• Adobe Photoshop

Instructions

1. To get started with printing, make it in Photoshop newest document size 300 by 300 pixels. On a white background, write a small line of any text ending with an asterisk.

2. Select the text layer. In the top control panel of the text layer, you will see an icon in the form of an arc above the letter “T” - click on it to open the text transformation window. In the Style section, select “Arc” with the value Horizontal, then click OK. Your text turned out to be curved in the shape of an arch, the 1st step towards a new seal has been taken.

3. The layer with the changed text must be copied (Duplicate layer), then select the Transform option in the Edit menu and specify a rotation of 180 degrees (Rotate) in it. The copy should be a mirror image of the original. Merge the layers.

4. Next, on a new layer, select the Elleptical Marquee tool and use it to select the text area. Select the Edit menu, then Stroke, specify the 5px parameter and set the default color to black. Repeat the same action, making a smaller circle inside your seal. Change the circular text as you wish, and also place any other image or new text in the center of the seal on a new layer.

5. Just the final touches to add some realism to the print. Make a new layer with the Render Clouds filter and add the noise result (Add Noise). Set the noise parameter at your own discretion - 30-40%. Set the parameters of this layer to Screen mode instead of Normal, and you will see how the print takes on an authentic appearance.

At Adobe Photoshop photography and all other images can be modified beyond recognition, and in fact any of your creative ideas in image processing with the support of Photoshop can become reality. Often when working with photographs or in the process of creating collages and photomontages, the need arises to turn the image around in a mirror - so that the figure in the photograph remains the same as before, but looks in the opposite direction, or even turns upside down.

Instructions

1. To rotate an image, open it in the program, and then go to the Edit menu and select Rotate Canvas. Select the Flip Canvas Horizontal or Flip Canvas Vertical subsection.

2. With the help of these commands, in a couple of seconds you will be able to rotate the picture horizontally or vertically, depending on what result you want to get. This way you will be able to expand all the layers of the image.

3. If you want to expand only one layer without touching the others - say, leave the landscape as it was, and rotate the object placed on it in a different direction - use the Edit>Transform command, and then select Flip Horizontal or Flip in the subsections Vertical.

4. Accordingly, you can flip every object on a separate layer, or flip all layers of the image from right to left, or mirror it vertically.

5. To remove only one layer from each set of layers in a photo or drawing, you can use the Layers palette. Right on the palette, click on the layer that you want to change and expand, and make sure that it is not connected to other layers.

6. Later, repeat the action described above - open the Edit menu, select Transform and indicate whether you want to flip the image horizontally (Flip Horizontal) or flip it vertically (Flip Vertical).

From a distance, it is not invariably a color photograph that is more beautiful and captivating than black and white. Sometimes it is monochrome colors that allow you to convey your well-being and create the necessary ambiance. In addition, it happens that color photography is great for everyone, but some too shiny detail distracts from the main subject. To avoid throwing away the photo, convert it to black and white. And he will not only be saved, but also, perhaps, will become much prettier and more colorful.

You will need

• Photoshop, photography.

Instructions

1. Adobe Photoshop provides several methods to make image black and white. Before you start, make a copy of the “Background” layer, depending on which method you prefer. Select " image– correction – black and white.” A window will appear in front of you, allowing you to adjust the brightness of different tones. This is the most comfortable and high-quality method to get black and white image, from the fact that you yourself can edit the brightness of the colors and make them the way you need. For example, you can make your face appear clear or, on the contrary, tanned. The firmament can become dark and gloomy, or it can become clear.

2. Method 2 – using channel mixing. Mixing - mixing. You can strengthen or weaken the power of one or another channel on the overall picture. “Image - correction - channel mixing” - this is the path we need. At the very bottom of the window that appears, check the “monochrome” box. The image will turn black and white and by moving the sliders of the various channels you can get the desired result.

3. The 3rd and easiest method is bleaching. Select the menu item “Image – correction – desaturate” or simply press the key combination Shift+Ctrl+U. The layer will lose all color information, making image black and white. The disadvantage of this method is that you will not be able to influence the appearance of the photo in any way and it is unrealistic to edit the brightness of the tones.

Probably most people have a lot of old, but dear to their hearts, stored at home. photos together with negatives. And many people still use film cameras. In the age of modern innovation, when one technical innovation is ahead of another in its functions and probabilities, the problem can be easily solved. A USB scanner will help you save precious pictures, one that is perfect for home use. If you have such a USB scanner, you can easily transfer photos from negatives to your computer.

Instructions

1. A tiny device scans, recognizes and saves images from a negative in jpeg, tiff and other formats in a matter of minutes. As usual, it comes complete with Photoshop and other drivers. The USB scanner is a small device that works via a USB port and is prepared for “digitization” photos from negatives. With one click of a button, you can upload a color image with a resolution of 5 megapixels to your computer. The USB scanner also comes with a special program for adjusting the colors in the image.

2. Simply connect the USB scanner to your computer and configure the operating parameters according to the instructions. Depending on the frequency of use of the system, it is recommended to connect the options modularly or monolithically. If you plan to use the scanner less often or value your computer sources lightly, use a modular connection, because driver assistance will only turn on when necessary.

3. Check the connected device record. When the scanner is recognized by the system, you can start working with it. Now you can comfortably store your old pictures on your computer, create photos in new quality, and they reflect significant life events and places you once visited.

Often, even those photographs that you consider good lack saturation. This is especially invisible when printing - the LCD monitor shows the image more brilliantly than paint and paper can do. This is a common problem, but it is absolutely fixable with the help of Photoshop or another similar graphic editor.

You will need

• – Graphic editor Adobe Photoshop
• – Photo for correction

Instructions

1. Open photo in graphic editor Adobe Photoshop using the “File – Open” menu, or the Ctrl + O keyboard shortcut. Crop the photo if necessary.

2. Often, photos lack contrast in the first place. Sometimes this is not immediately clear: at first glance the photo looks typical. But once you open the “Levels” dialog box, the true arrangement of affairs becomes clear. This window is called up by the keyboard shortcut Ctrl+L, or through the menu “Image – Adjustments – Levels”.

3. Pay attention to the diagram you see in the dialog box. Free spaces between its edges and the edges of the dialog box are a sign of poor contrast in the photo. Move the black and white markers closer to the middle, noticing how the photo changes. As you can see, the photo has more contrast and intensity. But don't overdo it, make sure that the colors remain normal.

4. In some cases, adjustments to the tiers are helpful so that the photo has more vibrant colors. If you want to add more saturation, refer to the menu item “Image – Adjustments – Hue/Saturation”. You can also call it by pressing Ctrl+U.

5. Move the slider to the right that is responsible for the photo saturation value (Saturation). Monitor how the photo changes. When the colors become intense but still normal, click OK. If you want to adjust the concentration of a particular color channel, you will prefer it in the list, the one at the top of the dialog box. Traditionally, the default mode is “Master”. In the same window, you can adjust the hue of the photo (by moving the “Hue” slider) and its brightness (“Lightness”).

6. Save the corrected photo using the menu item “File – Save as”.

Useful advice
There are also many other methods for adjusting the contrast of a photo, say through the Curves dialog box. You can also use the “Auto Contrast” and “Auto Levels” functions, but they do not always lead to a fairly good result.

Continuous stress becomes the cause of nervous disorders and the accumulation of anxiety and depression. If you see that emotions are preventing you from soberly assessing the situation; If you continually notice only the crappy things, it’s time to learn to see the world with different eyes.

Instructions

1. Think about the right consequences. If you are doused with mud from a puddle, you should not concentrate on your current state. Imagine coming home, changing into everything dry and clean, and taking a hot shower. If you constantly think about the dirt on your clothes and the fact that now every day is hopelessly spoiled, this will happen. As soon as you want, events will begin to take on a positive or negative connotation according to your desire. There is nothing glorious about showing up to work covered in dirt, but the tragedy of the situation should not be overestimated.

2. Think more optimistically. It seems that what is happening to you is the most terrifying thing that can happen in this world. Or these are just flowers, but the worst is sure to happen soon. Returning to the example of dirt on your clothes, you can fantasize that you are even lucky. They absolutely could have been drenched from head to toe, run over your fingertips, or even caught on the hood. You got off happily; for this alone it is worth being grateful to fate and rejoicing. And a ruined shirt certainly costs less than buying a new woolen suit, and this outcome is better than an intensive care unit.

3. Learn to look for great things near you. If you can't find anything positive, don't despair. Even here you can easily take the situation into your own hands. Let's say a car splashes on you, it happened before the main meeting at work, you don't have time to get home, and you don't have time to change clothes or really put yourself in a more or less respectable appearance. Yes, you won’t find anything positive here. Learn to look at things philosophically. But you will probably be able to delve into your memory and discover something great that happened on a given day. The neighbor next door smiled and they gave me my salary. Any negative can be obscured by something different and clear.

Video on the topic

Pay attention!
Some events, unfortunately, are impossible to transform from negative to positive. If something similar happened to you or your loved ones, do not try to turn it into a joke. Occasionally it is allowed to grieve, if it is smart and appropriate.

Useful advice
Never think about tasks too long. Continuous grinding of the same thing does not change the situation for the better, but it spoils your well-being and exhausts your nervous system.

Photographic film is still actively used in photography, and many important and expensive frames are stored in analog form, as they were obtained in the years when digital special technologies were not yet developed. Currently, there are several different methods for copying an image. negative .

Instructions

1. There are two different approaches to retake negative: digital and analog. Digitization of film allows for comfortable long-term storage of the image without further periodic retakes and guarantees its physical safety. Copy negative from film to film cannot boast of such faithful and indestructible preservation, but it can be aesthetically significant, and most importantly, it allows you to print from film manually, which is the highest value and quality of the printed photograph.

2. When scanning film to digital, you have to solve the problem of choosing a file format and scanning equipment. There are a large number of raster formats for storing images. The most common options are two types: with and without compression. A famous compressed format is JPG. It takes up little space compared to other types and stores a huge amount of information about the image. If photographic materials are not planned to be printed later or to do any other manipulations that require the quality of the source material, then you can limit yourself to this type. Otherwise, you should use a genuine uncompressed image in TIFF or BMP format.

3. The scanner has the greatest influence on the quality of the resulting material. There is a huge number of combinations of devices related to the type of matrix, illumination lamp and program probabilities. Scanners can be divided into two groups: amateur flatbed and highly professional drum scanners. It is preferable to use the final view, this will allow you to get a larger size, sharper image, and good elaboration of the re-shot negative in shadows and midtones.

4. Reshoot negative from film to film is less common, but still exists and is justified for some purposes. There are two options: re-shooting with the support of a photo enlarger on technical film and photographing negative. For the latter method, special lens attachments for macro photography are sold, into which a negative or slide is inserted, after which it is photographed with a camera. It should be noted that the final method can also be used for digitization negative(when shooting with a digital camera), however, scanning is preferable.

Video on the topic

Instructions

The next step is to invert the color. Inversion is a change of colors to the opposite, inverse ones. The keyboard shortcut Ctrl + I will help you do this, or you can use the menu operation: “Image – Adjustments – Invert”. You will see that the color of the original image is .

Many stop at the second step, but this is wrong, since the negative is not fully created. After inverting, you must desaturate your image. This can be done either from the keyboard – Shift + Ctrl + U, or through the menu: “Image – Corrections – Discolor” (Image – Adjustments – Desaturate). As you can see, the image has become completely black and white.

Next you need to correct the photo. The menu item “Image – Correction – Hue and Saturation” (Image – Adjustments – Hue/Saturation) will come to the rescue. Here, be sure to check the box next to the “Toning” option (Colorize). Next, use the cursor to change the field values ​​from top to bottom: hue – 209, saturation – 15, brightness remains the same, zero. Click OK.

The next step is to work on the relationship between light and shadow: “Image – Correction – Lights/Shadows (Image – Adjustments – Shadows/Highlights). A new image correction window will open. If it's small, click Show More Options at the bottom. Change the tone and light settings to make the image more saturated and of higher quality. In the “Shadows” item, set the following values: quantity – 0, tonal range width – 50, radius – 30 pixels. In the “Lights” menu: effect – 35, light tonal range width – 75, radius – 30. The color correction and midtone contrast values ​​should be negative: color correction should be set at level – 8, midtone contrast -10.

Any function of Photoshop implies application in image processing, but giving a negative effect sometimes seems inappropriate, incomprehensible and remains idle. So, in this lesson we will look at how you can apply the above effect.

Selecting an image (example). Create a duplicate of the original layer. We apply to it the actions shown in the figures.

Apply the Camera raw filter to the layer that has become a negative. It is necessary to give clarity to the lines and enhance the transmission of shadows.

Part of the girl’s body and her face should be removed from the shadow area, but so that there is no fading. To do this, you should go into the channels, remove the visibility from RGB and select a more suitable channel with a clear pattern. Next, you need to use the “Color Range” function: “Selection” tab to select the desired part of the image.

Using an eyedropper, select the part of the image on the working background that should be highlighted.

Copy the selected part. Restore visibility to all channels. Remove visibility from the duplicate channel. Return to the Layers window. Paste the copied part of the image in a separate layer.

We perform the flattening: use the “Rectangular Area” tool to select the image and in the “Editing” tab click “Copy combined data” and “Paste”. Apply the Camera raw filter to the flatten layer.

Apply the “Cross Strokes” filter to the “flattening” layer: “Filter” tab - “Filter Gallery”.

Duplicate the flatten layer and apply Gaussian Blur to it.

Add a layer mask to the layer and fill it with black. In the mask, use a soft white brush to blur the skin area. You can lower the opacity of the layer.

Using the “Curves” and “Levels” adjustment layers, enhance the shadows and highlights.

Combine adjustment layers into a group. Add a mask to the group and fill it with black. Develop some of the adjustment layers in the mask. Or, in relation to the adjustment layer, you can fill the mask with black and reveal individual areas of the layer.

Flatten again and in the resulting layer, using a hard white brush, carefully paint over the areas with dirt while enlarging the image.

RESULT

| Italiano | Ελληνικά | Norsk | Nederlandse | العربية | 繁體中文

negative In photography, the image is usually on a strip or sheet of clear plastic film, which reproduces the bright parts of the photographed object in the dark and dark parts as light areas.

The reverse order occurs because extremely light-sensitive chemicals are used to capture images quickly enough that normal shooting is darkened rather than bleached by exposure to light and subsequent photographic processing.

Exposure of sensitized paper through a negative, done either by placing the negative or the paper in close contact or by projecting a negative image onto the paper, cancels these tones and creates a positive photographic print.

Here are two types of negatives:

• Black and white negatives: consist of grains of metallic silver, chemically reduced during the development of silver salts affected by light during exposure;
• Color negatives: consist of three reverse-background images that are formed along with the silver image during development.

Now that we have a basic understanding of what a negative image is, let's start learning how to create photo negative effects in easy ways.

The Best Way to Create a Negative Photo Using WidsMob Retoucher on Windows and Mac (including macOS Catalina)

WidsMob Retoucher is a professional positive and negative photo effect editing tool that is now available in Mac OS X. With it, you can easily add negative effects to photos.

WidsMob Retoucher

WidsMob Photo Retoucher - Helps you remove noise that occurs at high ISOs, low light, high shutter speeds, etc. using custom information for each image and apply the saturation, contrast, and grain of the most iconic image grain to your digital images. analog films to give your photography a unique look.

Step 1: Add photo to WidsMob Retoucher for negative effect

Click "Open" to add a photo to the program or directly drag and drop the photo into the interface. Download and install WidsMob Retoucher on your Mac and then open this negative effect editing program. Click "Open" to add a photo to the program or directly drag and drop the photo into the interface.

Step 2: Apply a negative effect to your photo

Click the "FILM PACK" button on the top right sidebar. Select Color Negative Film from the Color Gamut Profile drop-down list.

As you can see the negative effect on the photo at the same time for your operation, you can also choose Different Film Effects to change the negative color.

You can also change color modes by adjusting contrast, saturation and special tone, and adjust film grain and intensity.

After editing, click the "Save" button at the top of the main interface to directly save the photo to your Mac. You can change the name and add tags to your photo. You can also choose the save location, format (JPEG or TIFF) and photo quality before saving.

Check out the video tutorial below for easier operation:

Method 2: Take a negative photo online using LunaPic

There are many online positive and negative photo editors on the Internet, you can choose one of them to make your photo negative. Let's take Lunapic.com for example to do negative photo switching online.

1. Enter lunapic.com in your browser and search for Negative in the Filters section.

2. Click the "Select File" button to select a photo from your computer or directly enter the URL of your online image in the "open URL" form to apply the negative effect.

You can also use another online video editor, such as IMGonline.com.ua, which can help you easily take a photo with a negative effect (or a positive one from a negative).

Simply select an image from your computer or mobile phone, click "OK" on the Page button, then wait for a few seconds, and you can directly upload the negative photo.

Method 3: Create Negative Photos Using Expression Studio on Windows 10/8/7

If you are using Windows computer, you can use the Invert Photo Negative filter in Expression Studio to invert the colors of an image. This filter is useful for turning a positive image into a negative, or turning a programmed negative into a positive result.

1. Open Expression Studio on Windows and select an image file.

2. Click "Image Editor" in the menu, and then click "Undo Photo Negative".

3. Then click "OK" to invert the image in the "Undo Photo Negation" window and the negative image has been saved successfully.

Method 4: Make a negative on iPhone/iPad

Step 1: Open Settings on your iPhone or iPad. This is a gray app that contains gears and is located on the home screen.

Step 2: Scroll down and tap General. Then click "Accessibility" in the middle of the individual section menu.

Step 3: Click "Show Layout" and move "Invert Colors" to the "On" position. It will turn purple and the colors on your device will now be inverted.

Any amateur photographer, and especially a specialist, is familiar with the concept of a negative. The word, which comes from the Latin negativus, means the opposite, negative meaning of color: brighter places on the film turn out black, and vice versa. The brightness of the color also changes in the opposite direction, and the paler areas of the image end up being the most striking.

Printing from negatives allows you to take clearer pictures and correct some areas of skin or clothing to improve them. How to make a negative out of a photograph? Adobe Photoshop will come to the rescue.

Question "Photoshop CS3" - 1 answer
Instructions
1
Open the image that you will convert to negative.
2
The next move is to invert the color.

Inversion is a change of colors to the opposite, inverse ones. The keyboard shortcut Ctrl + I will help you do this, or you can perform the operation through the menu: “Image – Corrections – Invert” (Image – Adjustments – Invert). You will notice that the color of the original image has changed.

3
Many people stop at the second step, but this is wrong, since the negative is not fully created. After completing the inversion, it is imperative to desaturate your painting.

This can be done either from the keyboard – Shift + Ctrl + U, or through the menu: “Image – Corrections – Desaturate”. As you can see, the image has become entirely black and white.

4
Then you need to correct the photo. The menu item “Image – Correction – Color saturation and tone” (Image – Adjustments – Hue/Saturation) will come to the rescue. Here, be sure to check the box next to the “Toning” option (Colorize).

Then use the cursor to change the field values ​​from top to bottom: hue – 209, saturation – 15, brightness remains the same, zero. Click OK.

5
The next step is to work on the relationship between light and shadow: “Image – Adjustments – Shadows/Highlights.” A new image correction window will open.

If it is small, click “Additional options” at the bottom (Show More). Change the light and tone parameters to make the image more saturated and of higher quality. In the item “Shadows” – Shadows, set the following values: quantity – 0, tonal range width – 50, radius – 30 pixels. In the “Lights” menu: effect – 35, light tonal range width – 75, radius – 30.

The color correction and midtone contrast values ​​should be negative: color correction should be set at level – 8, midtone contrast -10.

6
Quite often when creating negatives, the image is flipped. This can be done using the menu item “Image – Reflection and Rotation” (Image – Rotate Canvas).