What to do if your iPhone won't turn on?

Today the iPhone is super popular and in demand. Its excellent screen, which gives an incredibly high-quality picture, has won millions of users. Practical design, popular interface, convenient applications This crowning creation of Apple will not leave you indifferent. But what to do even if such an ideal device has a problem. For example, it simply does not turn on. In this case, it is very important to correctly diagnose the cause. Only after this act.

You need to diagnose the problems first

We will describe the most common causes of problems and tell you what to do.

1. If the screen is black

When iphone looks at you with a blank black screen - don’t rush to panic. That doesn't mean it's over. Most likely the reason is that the battery is completely discharged. The second reason may be changed by iOS. It's easy to restore your device. The main thing is to do what we tell you.

If the reason is that the battery is low or the iPhone is left in a cold state for a long time, then first you should warm the device in your palms. Then connect the device for 15 minutes to charge. If the reason for a broken iPhone is a dead battery, it will turn on soon. If it doesn't, iOS may have hung up. Then you need to press the HOME and POVER buttons simultaneously and hold them for ten or twenty seconds. Soon you will see what's on the screen the apple is burning. Release the buttons and iOS will start in about a minute.

Related articles

If in this case the long-awaited apple does not burn, we will tell you what to do. Requires two or three times in a row turn on/ mute your iPhone. Then connect charger for 15 minutes. This operation, as a rule, always gives a positive result.

If these steps are unsuccessful, try changing charger and cable. Perhaps they are the culprits for the fact that the iPhone does not Included. If, in addition, you are not using an original, but cheap Chinese counterfeit, this may be the reason.

2. If the buttons don't work

There is also the following option: iPhone does not respond to button presses, and the screen latest application freezes on the screen. The first thing to do in this situation is to reboot the device in forced mode. To do this, hold down the "Sleep/Wake" and "Home" buttons at the same time, and after ten to fifteen seconds you will see the screen turn on again the apple is burning.

Related articles

How turn on IPhone 4, if it comes out and doesn't Included

How turn on iPhone 4 if he went out and won't turn on.

IPhone 4 does not solve the problem.

What should we do.

It happens that the device still does not turn on. You should then connect to the charger and let your iPhone charge for fifty to sixty minutes. You will soon see that the charging screen is turned on. If this does not happen, carefully check the connector connector, charger and cable. Perhaps they are the reason. Try the same procedure using a different power source.

3. If the iPhone does not turn on, but constantly the apple is burning

Another unpleasant situation that often occurs among users of the iPhone 4S and iPhone 5S is that when the screen is turned on, the apple goes out. In this case, do not test your nervous system's strength. Most likely, there was a failure when restoring iPhone from backup copy. What should I do in this situation? Recovery mode and the computer on which you should run iTunes will help you. After connecting the USB cable, but for now only to the computer. Then, your action is to turn off the iPhone completely, getting rid of the apple, which is still lit, then goes out. To do this, press and hold the “HOME” and “POVER” buttons. Then press "HOME" and connect USB. This must be done until the iTunes logo appears on the screen, with an image of a plug next to it. A message will appear on the screen indicating that recovery mode is active. All you need to do is click the "Restore" button.

Related articles

4. If all methods fail

What can you do if you try everything but the apple does not appear on your iPhone screen? There is a special recovery mode - DFU. It is designed to restore iOS firmware if all your other attempts fail. Please be clear that this mode should only be used as a last resort, because if it is activated, all data from the iPhone will be lost.

So, first you need to connect to the charger for five to ten minutes. After connecting to your computer, check whether the device was in iTunes. If this does not happen, go to DFU mode: hold down the HOME and POVER buttons simultaneously for ten seconds, then release POVER. Then, for fifteen to thirty seconds, hold down the HOME button until iTunes says “Recovery Mode.” Don't wait until the screen thanks you and shows you an apple as usual. A successful login to DFU is indicated by the absence of an image on the screen. If you want to restore the firmware on your iPhone, look for the "Restore iPhone" button in iTunes. To exit this mode, simply unplug the cable from the device and press HOME and POVER for ten seconds. After these manipulations iphone must reboot.

5. Help comes to the service center

If, despite all efforts, the iPhone could not revive on its own, we will have to turn to specialists for help. But remember that only if you treat it properly, your favorite gadget will serve you for many years.

If you find that your iPhone won't turn on, don't panic! It could simply be completely discharged and switched off. Accordingly, the iPhone needs to be charged for 15 minutes from the adapter or for 25 minutes from the computer, after which it will turn on - a battery with lightning inside will appear on the screen.

The smartphone refuses to charge the battery and does not make the characteristic charging sound. This problem is especially common on iPhone 4 and 4s. Most likely, the smartphone simply does not see a connection to a power source - a household outlet or a computer's USB port - due to a malfunction in iOS.

Sometimes, to restore the battery charging process, you just need to restart iOS. To do this, you need to connect your smartphone to a power outlet using a proprietary cable and hold down two buttons at the same time - Home and On/Off - until the iPhone restarts. As soon as the operating system loads, you will hear the sound of charging starting, and the animation of the smartphone’s battery level will also change.

Another reason for the lack of charge may be the use of a faulty or unsuitable cable. Cheap, uncertified cables often produce a slow battery charge, which can also appear as if the device is not charging. In this case, you need to wait 8-12 hours to fully charge the device if you don’t have another cable at hand.

Other reasons why iPhone 4 won't turn on or charge

• Defective battery (requires battery replacement)
• Dirty connector (Need to clean the connector)
• Damage to the smartphone (diagnostics required at a service center)

Sometimes it happens that the logo “hangs” on the smartphone screen and the system does not reboot - in in this case The firmware could have crashed. In this case, a hard reboot of the system may help.

Everyone knows the high quality of Apple products, and the iPhone 4 is no exception. And yet, like any technology created by human hands, at times the iPhone can fail. This is especially worrying when you need to make an urgent call. In such cases, when the iPhone 4 does not turn on when you press the Power button, there is no need to immediately panic. Most problems can be fixed. Often such procedures can be carried out independently.

Causes of malfunctions

• Software (the program crashed or the files were damaged by viruses).
• Mechanical (there were mechanical damage or ordinary wear and tear).

In the case of mechanical failures, the problem is solved by replacing parts. There are often cases when you can do this yourself, at home. For example, when you need to replace the battery or glass.

If the malfunction is of a software nature, then even here you can do without the help of specialists. Let's consider the simplest cases.

The first reason that may come to mind is that the battery is completely discharged. There is not enough energy even to simply display the charge indicator on the display. Then you should connect your smartphone to your computer or network. At the end of 15 minutes (it may take more if connected to a PC), press the Power button without disconnecting from the network. After this, it will become obvious what the cause of the malfunction is: if the problem is only in the charge, then the device’s display will display an image of an empty battery with a lightning icon inside. It becomes clear that there is not enough energy to make calls and run programs. We wait several hours until the charge is fully recharged.

Software glitch

There are times when even after a full charge the iPhone 4 does not turn on. This may be due to software glitch. To resolve the situation, you can use a “hard reboot”. What is this procedure? To launch it, simultaneously press the Power and Home buttons and hold them until the Apple logo appears on the screen. operating system will reboot again, after which it becomes possible to use the device further.

Other reasons

So, we looked at two cases when you can do it on your own. Moreover, in the second case, all procedures will take only a few seconds. In the first case, it may take several hours to charge.

What to do if iPhone 4 does not turn on even after these procedures?

If after these procedures the situation has not changed, there may be a different problem. The following reasons why iPhone 4 does not turn on are possible:

• the battery has failed (can be solved by replacing it at a service center or doing it yourself);
• The power cable connector is clogged with dirt (you can carefully clean it yourself);
• The USB cable or charger is faulty (in this case, nothing can be done with the old cable - it needs to be replaced);
• short circuit due to moisture getting inside or mechanical damage to the device (you should not try to solve the problem yourself - it is better to contact a workshop);
• voltage surges during charging caused damage to the microcircuits (this can happen if you charge the battery in a car);
• manufacturing defect (replacement under warranty).

iPhone 4 is on fire, Apple does not turn on

Sometimes the device does not respond to actions from the owner, even when the “apple” lights up. This problem is one of the most common why iPhone 4 won't turn on. Possible reason It may be necessary to reflash the device. You can do this operation yourself. To do this, there is an iTunes service in DFU Mode, the screen must be turned off. This is possible when iTunes is installed on your smartphone. latest version. The device is connected to the PC, and the current version of the firmware for that day is downloaded from the Apple website. Next, the smartphone is switched to black screen mode and iTunes is turned on. A dialog box will appear on the display. Press Shift + “Restore” (if you have Windows) or Alt + “Restore” (for Mac owners). The firmware is selected and the recovery procedure starts.

There may be situations where even after such a manual flashing the device does not start. Then you should contact qualified specialists. High-quality repairs will be carried out there, perhaps even before your eyes.

The most problematic situation is when the motherboard. In this case, it will need to be completely replaced, since the motherboard is a complex device consisting of a processor, RAM, various connectors and drives. The reason that can cause the board to fail can be either mechanical damage to the device or the ingress of liquid.

Wi-Fi problems

From time to time, owners receive complaints that the iPhone 4’s WiFi module does not turn on - the connection is periodically lost or the device does not want to connect at all. The cause may be either software glitches or mechanical failures. In the case when the Wi-Fi connection is periodically lost, a simple reset can help. The fact is that similar problems were noticed among users who switched to iOS 7.

And yet, there are more frequent cases when the problem lies not in the software, but in the hardware component. The best solution here would be to contact a service center.

For those who are determined to solve the problem on their own, an interesting way to solve this problem was suggested by one of the Internet users: heat the iPhone 4 with a simple household hairdryer. Heat until the display shows a critical temperature warning. Next, the author of the method advises turning off and turning on the device - according to him, Wi-Fi should work. But whether to use such a risky method or still take the expensive device to a specialist is up to you to decide. Advice from strangers is much less reliable than advice from professionals.

Articles and Lifehacks

If, after purchasing a mobile phone, you are faced with difficulties in how to turn on the iPhone 4s, then you should not immediately panic. But even those people who are well versed in gadgets may not understand the process of turning on a device of this model.

Phone activation algorithm

Most often, the mobile phone is turned on and off with the Power button. But the device does not always begin to function fully after this, therefore:

1. After purchasing the device, take it out of the box along with the included cable.
2. Turn on your PC, download the iTunes application onto it.
3. Insert a SIM card into your mobile phone, turn it on by pressing Power, and connect the phone to the computer.
4. Most often, iTunes launches itself when you additionally connect the phone to the PC. If this does not happen, then launch the application manually. The program will prompt you to activate your mobile phone, agree.
5. Wait a while for activation to occur. Until this happens, the mobile phone will be in standby mode.
6. After activation is complete, try making a test call. If you managed to do this, then now you can use all the functions of the gadget.

Algorithm for turning on the phone

If the mobile phone is activated, then follow these steps:

1. Insert the SIM card into your mobile phone, click on Power.
2. Select the language of the menu and phone.
3. An inscription will appear on the mobile phone screen asking whether you allow the device to determine your location. In the future, this function will be needed for cards and use in various social networks.
4. After this, the phone will ask you to make a Wi-Fi connection. You can skip this step or activate it later.

   You will need the Internet to send a message about the successful activation of the device and access various online services. You can also connect to the Internet using 3g.

After all these steps, you can use your mobile phone the way you want. Make calls, send messages, be on social networks.

And remember, the device must be charged in a timely manner so as not to be left without communication at an unexpected moment.

So, you have become the happy owner of a brand new product from a famous Apple company. How to turn on iPhone and how to start using it? iPhones of all generations are turned on as standard - using the Power button located at the top right of the phone. The same button is responsible for locking and unlocking the phone.

But even after turning it on, it is most often impossible to use the iPhone. In order for the device to begin fully functioning, it must be activated. If you bought a phone from one of the major mobile operators such as MTS or Megafon, then it will most likely already be activated. But if not, then you can do this operation without problems.

Let's take a step-by-step look at how to turn on your iPhone and activate your new phone.

1. Take your iPhone and PC cable out of the box.

2. Download and install on your computer special program iTunes.

3. Insert the SIM card into the phone, turn it on using the Power button, connect the phone to the computer via the cable that was included.

4. Most often, iTunes starts automatically. If not, run the program manually. She herself will offer to activate the device. We confirm the request.

5. Leave the iPhone alone and wait for activation to occur. While there is no activation, the device displays a waiting message. While the process is going on, you can get acquainted with the capabilities of the device that do not require communication, for example, with the camera, importing photos, menus, etc.

6. When activation is complete, try calling. If everything is in order, the phone will dial the number. This means that the full functionality of your iPhone is enabled.

How to turn on iPhone 4s

For this generation of iPhones, the activation process was significantly simplified - using a computer was no longer necessary.

How to turn on iPhone without using iTunes.

1. Insert the SIM card, turn on the phone using the “Power” button.

2. Choose a familiar interface language: Russian-Russia

3. The phone asks whether you will allow it to determine your location or not (this will be needed later to use maps, check-ins on Facebook, etc.). If these functions are needed, then we allow them.

4. Next the iPhone will ask WiFi connection. In principle, this step is optional. It can be done later, at any time. We will still need the Internet to send information to Apple about the successful activation of the device, as well as for the operation of various online services such as iCloud and iTunes Match. For the same purposes, you can successfully use mobile internet local operator (3G/GPRS).

5. Now the iPhone will register on the network mobile operator, will receive the necessary settings for MMS, SMS. If you previously had a different iPhone, they will offer to restore the previously saved data from a backup copy. And if the iPhone is new, then you need to select “Set up a new device.” In general, after this you can already use the phone fully. Further steps are in principle optional, but highly desirable.

6. Again, you need to connect to the Internet and log in with your Apple ID (this is a personal account for all Apple services). If you don't have one, you need to create a new account - it's free and easy.

7. An agreement appears that you need to accept (it would be good to read it first), then enable (or not enable) voice assistant.

8. Whether we agree or not that Apple conducts diagnostic reports, click the “Start using” button. That's all, actually.

Don’t forget also that you can activate your iPhone 4s using using iTunes.

How to turn on iPhone if the "On" button does not work

If you hold the power button for a long time, but the phone does not respond, it means that the problem is most likely in the upper cable where the button is located. Then there will be problems with the headphone jack, the volume control buttons, and the switch silent mode.

Perhaps the power button has sunk, reaching the same height as the body. You need to check: maybe the fasteners are cracked or the screws are loose.

In any case, if the button does not work, then the phone must be taken to the service. It is better not to open it yourself.

How to turn on iPhone if it's frozen

To do this, you need to use the forced reboot mode: simultaneously press and long hold the “On” button (at the top) and the “Home” button (the only round button under the screen). After this, the phone will turn off. If you turn it back on, it will take longer to reboot than usual, but the problems will automatically be fixed.

How to turn on iPhone 3G

On home page screen you need to click “Settings” - “General” - “Network”. In the next window, swipe the slider. Click the “On” position next to 3G.

When the 3G protocol is used, the information loads faster, but the battery power is also consumed faster.