New device, such as a smartphone or laptop, but can't remember the WiFi password. In this article we will tell you what to do if you have forgotten your WiFi password.

What to do if I forgot my WiFi password

Forgot your WiFi password? Don't worry, it will only take you a minute to find out your password. If you have a device connected to WiFi, then you can view the password saved on it at any time. Even if you don't have any connected devices, you can always find out the password by connecting to the web interface of your router.

Method #1: View your saved password using Windows

Open Network and Sharing Center.

After this, the “Properties” window will open in front of you. wireless network».

Here you need to check the box next to “Display entered characters”. After that, in the “Network Security Key” field you will see the WiFi password.

Method No. 2. View the saved password using the WirelessKeyView program.

In addition, you can use the WirelessKeyView () program. I discovered this small program when I once forgot my WiFi password.

This program is distributed absolutely free, is small in size and does not require installation. All it does is display all WiFi passwords stored in the operating system in the form of a convenient list. All you need to do to view your saved passwords is download this program and run it with administrator rights.

Method No. 3. View the password using the router’s web interface.

If you have forgotten your WiFi password and you do not have a single device connected to this access point, then you need to connect to the web interface. To do this, enter the network address of your router in your browser and log into the web interface using your username and password. Typically, the router is accessible at the address “http://192.168.0.1” or “http://192.168.1.1”.

In the router's web interface, you need to find the section responsible for the security of your WiFi network. As a rule, this section is called “Wireless Security”.

Here you need to find the text field in which you enter the WiFi password and check the box that removes the protection from viewing the password. In my case, this checkbox is called “Unmask”.

The question “What should I do if I suddenly forgot my Wi-Fi password?” in popularity is not inferior to the eternal Russian questions “Who is to blame?” and “What should I do?” Modern people are so accustomed to the Internet, which allows them to find out everything in the world in a matter of seconds, that they have become much less likely to rely on their own memory. And indeed, why remember the number Pi to the eighth decimal place, if its exact value can be found out by entering the corresponding search query in an Internet browser?

Things are more complicated with the login information for your social media accounts. The same is true for the Wi-Fi password. If you forgot the password for your wireless network, the omniscient Google will not help you with anything. Of course, you can always reset your router, but then you will have to configure it from scratch. It’s better to use one of the ways to find out the Wi-Fi password outlined below.

In the properties of wireless networks

Luckily for you, Windows stores the password for the networks you connect to. Therefore, find out forgotten password from Wi-Fi standard means OS can be done as follows:

Using WirelessKeyView

The “Display entered characters” checkbox may be inactive. In this case, it will help you free program WirelessKeyView (Windows only), which scans the registry for stored wireless passwords:

If you are a home computer user Windows control XP, use the password from the Key (Hex) column. It is noticeably longer than the ASCII key, but will fit your network.

View the password in the router settings

To access your router settings, type the device's IP address into the address bar of your browser. Typically this is 192.168.1.1, but the IP address can have a different meaning. If this address does not work, you can find out the router’s IP:

• finding it in the instructions for the router;
• Having inspected the body of the device for the presence of a sticker with the IP indicated on it (sometimes the login and password are also written on the stickers);
• by looking in the properties of the wireless connection.

You can go to the properties of the wireless connection in this way: first go to the “Network and Sharing Center”, then left-click on the “Change adapter settings” line, right-click on the connection, select the “Status” line, click on the “Information” button " The router's IP address appears next to a line called "IPv4 Default Gateway."

Having found out the IP address of the router, enter it into the address bar of your Internet browser, after which the login window for the router settings will open, where you need to enter a login with a password. Router manufacturers, as a rule, use the same login and password – admin. Sometimes, instead of a password, you need to enter the words password or pass, or leave this field completely empty. Information about standard passwords and logins for devices of different brands can be found on the Internet.

If you changed the factory login and password and “safely” forgot them, you will have to reset the router’s settings using the tiny Reset button on its case. After which the device will have to be configured from scratch.

By going to your browser settings, you need to find the corresponding menu section. For example, if you are using a Huawei HG530 router, then click on the Basic category and select the Wireless Lan subcategory. You can see the Wi-Fi password next to the Pre-Shared Key line. However, keep in mind: in routers of other brands, the menu may look completely different.

Using your phone

If you have a Wi-Fi connected smartphone running Android control, you can find out the Wi-Fi password using it. It should just be noted right away that this method will only help owners of rooted devices. You can get root rights by installing rooted firmware on your smartphone, but it is much faster and easier to download and install the SuperSU program, which, by the way, is on Google Play.

Using WiFi Key Recovery program

If you are afraid of accidentally deleting something wrong, download from Google Play WiFi program Key Recovery. It also requires root rights, but information about wireless connection displays on the screen without unnecessary actions.

WI-FI at home has become an everyday thing for many, thanks to which you can mobile device go online, watch a video, or find the information you need. Many smartphone owners ask the question of how to view the WI-FI password on Android. This can be done using standard phone functions or using specialized programs.

In what situations is it necessary to find out the password?

Let's say you or someone in your family bought new phone or tablet. Naturally, there will be a need to connect the device to your home Wi-Fi. Thanks to automatic storage, most users do not remember the password, since they do not need to enter it every time.

You also often have to give your Wi-Fi password to your friends. An excellent option if it is saved somewhere on your computer or on a separate piece of paper. If backup copy no, then users have the opportunity to find out the combination from WI-FI on Android.

We use standard gadget functions

The easiest way to find out the WI-FI password is to look at it in the properties of the access point on Android. As a rule, most smartphones allow you to view the current password in the wireless network settings. To do this you need to do the following:

After this, you can find out the desired combination, and then save it on your computer or write it down in a notepad. This method is not relevant for all devices.

We use a router

One of the methods for finding out the Wi-Fi password is to examine the router settings. This is where you can find the required combination. You can even get into the modem settings through your phone using a regular browser. To do this, follow the steps of the following instructions sequentially:

Here you can change the security level and the password itself. However, this method is relevant if you have not changed the input data for the router. Otherwise, you will not be able to get into the settings.

Using file managers

Android system stores the names of networks, as well as passwords for them, in a special file, which can be opened and read if desired. However, for this you will need to obtain Root user rights, since otherwise you will not be able to see and enter the system folders. You must first install one of the file managers, for example, RootBrowser, as well as the RB Text Editor program. After this, the steps are quite simple:

You can perform similar actions using the popular ES Explorer application. To do this, you just need to go to the necessary directories and then view the file with passwords.

No less convenient application is Wifi Password(ROOT), which can be downloaded from the official Google Play Store. Its main advantage is that you do not need to search for directories and open files. The application will do all this on its own, displaying a list of networks and passwords for them in a convenient form. You only need to click the Show password button in the top right corner.

WI-FI Password (ROOT) also requires superuser rights.

Find out the password on Android using a computer

If your phone settings turned out to be useless in this matter, and you don’t want to get root rights, you can use special utility For personal computer WirelessKeyView. The program is distributed absolutely free of charge. There are versions for both Windows x86 and x64. The application is presented as a single executable file, so you don't have to install anything.

Wireless Wi-Fi networks are now available almost everywhere. In the homes of ordinary users, at work, in crowded places. And if you actively use various Wi-Fi networks, then you have probably encountered situations when you could not remember the password for a particular wireless network. It is also not uncommon for Wi-Fi to work on one device (for example, a laptop), but it is not possible to connect a smartphone or tablet to the same network because you... IN this material we will tell you how to view the Wi-Fi password on your computer in order to connect other mobile devices to the network.

How to view your Wi-Fi password using Windows settings

Using WirelessKeyView, you can quickly view all the saved passwords that are left on your computer. To do this, simply run this program on your computer and wait until it finds the saved passwords. After this, a list of saved Wi-Fi networks and passwords for them will appear in the WirelessKeyView program window.

The access key to the network or to the network administrator page is lost, don’t be discouraged. It is possible to restore them. This article will help you solve this problem.

Standard passwords for routers

Every wi-fi router operates on the basis of access data to the Internet and local network, which are login and password. They are created at the very beginning of use in the first stages of setting up network equipment. The login is always the same Latin word “admin”, and the password can be either the word “admin” or the numbers 1234, 123, 0000.

There may also be no password at all. And for the Kyivstar operator, such a login is possible.

In any case, in order not to push your luck and not waste time on a random selection, you need to look at the technical data sheet of the router, which is included in the kit and may look like a brochure. If the router came to the user as a used product and the technical passport is not available, it is worth asking your friends, acquaintances or relatives who use a network device made by the same manufacturer, because login and password will be the same.

Factory settings

At the initial stage of setup, after entering standard identification data, the user will be offered the opportunity to change the login and password to make it difficult for unauthorized users to log into the domain. Those. On the computer screen, the interface will display all the necessary data, as well as tips on generating an “access key”, which includes the login and password.

After passing this stage, the user will be asked to create local network with automatic connection to the Internet for ease of use in the future. At the same time, you should not confuse the login and password for accessing the local network operating on the basis of the router and the Internet, because these are two different things.

I forgot my router password, what should I do?

What to do if you forgot your router password is a common question for many users who have forgotten or lost their data. What to do in this situation? Recovering the key is easy. It all depends on which network password and login were lost. If it's a local network issue, i.e. in your router, then there are no serious difficulties to restore it.

Video: resetting the TP-Link router interface password

If the user has forgotten the Wi-Fi router password, he needs to act as follows:

1. in the lower right corner of the toolbar on the desktop you need to find an icon in the form of a ladder or a monitor;

   

2. if these icons are not visible on the panel, then you need to click on the icon with two checkmarks, which is located next to the display of the current language on the keyboard (RU or EN);

   

3. after the required previously described shortcut appears, you must point the cursor at it and press the left mouse button;
4. after the list of available connections appears, point to the line where the home network is indicated and click the right mouse button;

   

5. in the small window that appears, you need to select the “properties” option;
6. in the new “properties” window that opens, in the security tab, check the box next to the line “display entered characters”;

   

7. in the same window, in lines with dots, the login and password information for logging into the router will be displayed.

How to recover the password and login for the router if they are needed to access the Internet?

In case of data loss, the following procedure is required to use World Wide Web resources:

1. go to the home IP address of the router;

   

2. after entering the network device settings, you must select the “Internet” tab;

   

3. various options will appear in the updated interface window, one of which will be the login and password for logging into the Internet;
4. if the login and password data are not visible, and instead of them, asterisks or dots are indicated in the parameter lines, you need to find the “show symbols” option below and check the box next to it.

   

Thus, the user has the opportunity to independently correct the situation without outside help.

Restoring an Administrator's Domain

In addition to those users who have lost access data to the local network and the Internet, there are also those who manage to lose access to the administrator page ( home page router). In this case, there is no chance to recover lost information and change the settings of the network device. On forums there is often a question like: “I forgot my admin login and password. What should I do? It is easier to reset the settings on the network device and re-create a new local network.

To reset the router parameters, just press and hold the button on the rear panel in this position for several seconds.

In this case, the lights on the front panel of the device will go out for a while, and then start working again. The button itself is located in a small hole to prevent accidental reset, and it can only be pressed using an additional device, which can be a match, a needle, a pin, etc.

Recovery methods

The router settings will be of no use if the user loses the access keys to the administrator page, router, local network and the Internet. In this case, each of the access keys will be restored differently. The main methods are hardware and software.

Method hardware recovery access is associated with checking the settings on the router’s home page, and software access relies on the use of a software registry and special work applications that scan all information on the computer about network use.

When hardware recovery to the network is required, at a minimum, you must have a login and password for the administrative page on which all the parameters and settings of the local network and Internet connection are generated. To enter the administrator page, you need to type the manufacturer’s IP address in the address bar of your Internet browser.

The IP address can be found on a sticker located on the bottom of the router.

If there is none, then the home addresses of the routers look like this:

1. D-link 192.168.0.1
2. Zyxel 192.168.1.1
3. Asus 192.168.1.1
4. Netgear 192.168.1.1
5. TPlink 192.168.1.1

After logging in to the appropriate router address, the user will see an interface with many settings and network parameters. In order to find out the data on the local network, you need to go to the “local network” tab. This tab may also be called wi-fi network or have names similar in meaning.

After which the user should find the “wpa key” parameter. Opposite it will be the router access password.

Password and access to the router are not everything. In addition to the local network login key, you may also need login information for the provider's domain. This data is also specified in the network device settings.

To do this, after fixing the data on access to the local network, you need to go to the “Internet” tab, where not only the parameters and connection technology will be indicated, but also the data on logging into the Internet.

Most often, the login and password are located next to the “settings” line account" or "connection settings".

Restoration by utility (program)

In addition to the hardware method of eliminating the problem of loss of identification data when logging into the Internet and local network, there is also a software method. It is used by professional users and is not suitable for helping beginners. Thus, the participation of a second user with more than high level knowledge in this area.

The software method uses the following working applications to help restore the necessary data using logins and access passwords:

1. Dialupass;
2. Remote Desktop PassView;
3. RouterPassView;
4. WirelessKeyView;
5. Wireless Password Recovery.

And this is not the whole list. These programs themselves are amateur developments, and not the result of the work of professional teams, so the interface of these programs is not always convenient and understandable for a beginner. But if the user nevertheless decides to take independent action, then he needs to be prepared for the fact that most links to such work applications may contain malicious software.

Throughout the entire operation of the profile program, an antivirus with the maximum possible set of functions must be running on the computer to search and detect the login and password from the network in order to prevent infection of your personal computer and damage or theft of personal data.

The work of such programs is based on the basic principles of operation operating system, which, in turn, records every step of the user in the electronic information space. In this case, a register is formed that describes all actions performed during the lately. They will be stored as encrypted files until all the memory on the hard drive is full.

It is impossible to open these files without special knowledge and professional skills. Not a single program known to many users will be able to read them and display the necessary information on the computer screen. In this case, we need special applications, helping to reveal encrypted logins and passwords.

After appropriate use of the program, the PC owner will be able to independently use both local and Internet networks in the future. But we must not forget that all access keys to networks must be saved, both in the form of a regular file with printed text, and in written form, so as not to experience significant difficulties in connecting in the future.

Video: installing and configuring a Wi-Fi router

To prevent loss of data for accessing the local network and the Internet, novice users are recommended to take the following steps:

1. during setup and installation of drivers for network equipment, the program will offer to save a file with backup access data on the PC desktop;
2. after creating the file with network access data, you must copy it to removable media and make another copy in any other folder;
3. After copying the files, you must manually write down on paper all the necessary logins and passwords from the network.

In addition, do not forget that the keys are also freely available for viewing from the computer of the user who configured the router. This data can be seen in the network properties. To do this, you need to find the network connection icon on the taskbar on your desktop in the lower right corner.

Then move the cursor to the name home network and press the right button. When a new window appears, select the “properties” option and in the next new window you will be able to see all the necessary keys.

Using these tips will reduce the likelihood of complete loss of necessary information for the local Internet network.

Question and answer:

How to view Wi-Fi password in Windows?

To view the password for accessing a wireless local network in Windows, you must: