Reading time: 10 min

In this article, I will look at the reasons why the iPhone does not send or receive MMC and what to do in this case to solve the problem.

This article is suitable for all iPhone 11/Xs(r)/X/8/7/6 and Plus models running iOS 13. Older versions may have different or missing menu items and hardware support listed in the article.

Setting up iPhone to send MMS

To enable MMS on iPhone, go to “Settings” - “Messages”. There, activate the corresponding toggle switch. As a rule, MMS is configured automatically and no connection parameters are required.

Increase

After that, turn on cellular transmission in the settings. Make sure it works mobile network by opening a web page, for example. To complete activation successfully, it is advisable to restart your iPhone. To do this, hold the side button and swipe from left to right on the pop-up menu. Then turn on the device.

Ask your question to a specialist

Don’t know how to solve a problem with your gadget and need expert advice?

Increase

Reasons why MMS does not send

If you have problems sending MMS, the first thing you should check is whether your operator provides the transfer of such messages. This feature may be paid and not enabled automatically. To check the availability of MMS, you can contact the operator or go to personal account on the website or in a proprietary application. Typically, this setting is displayed in the list of connected services.

Increase

If MMS are not being sent, try the following steps:

• Make sure MMS parameters are set automatically. To do this, follow the path “Settings” - “Cellular Communications” - “Data Settings” - “Cellular Data Network”. The APN, username and password must be entered there. The appropriate values ​​for these parameters should be obtained from the operator. For example, for Beeline it is: , beeline and beeline, respectively.



Increase

• Conflict with iMessage. MMS may not be sent due to the fact that your interlocutor has an iOS device. This is easy to understand by the color of the windows: they turn blue, not green. In this case, transmission via iMessage is used. If you do not use it, you should disable this feature. Open “Settings” and select “Messages”. Please note that your operator may charge a fee to reactivate iMessage.



Increase

• Send the message as MMS. In continuation of the previous point, it is worth noting that a message already sent via iMessage can be transmitted in the usual way. To do this, hold down the message you need and in the window that appears, select “Send as SMS/MMS.



Increase

• Disable LTE. MMS messages may not work correctly on an LTE network. To disable them, go to “Settings” - “ Cellular connection" - "Data settings" - "Voice and data".



Increase

• Hardware problem. Restart your iPhone and try removing the SIM card and putting it back in.
• Reset your network settings. Perhaps there is some kind of problem in the iPhone software glitch, due to which the connection does not work correctly with MMS. To reset your network settings, go to “Settings” - “General” - “Reset”.

iPhone is used by many owners of modern gadgets. This is a very common device with a variety of settings and capabilities. Today we have to figure out how to enable MMS on iPhone 6. What does every owner need to know for this? Why might there be problems with the service? All this will be discussed further below. Dealing with the questions posed is easier than it might seem. Even a novice user will be able to bring the idea to life.

Sources of problems

First, you need to understand why MMS are not sent from iPhone 6. MTS or any other operator is not so important. The main thing is that the reasons do not depend on the chosen mobile communication company.

Most often, problems with MMS are caused by broken or completely missing network settings. IN in this case You will have to reset the settings and enter the correct connection information.

Sometimes operational problems are caused by a failure of Wi-Fi or the Internet in general. You need to find out why the network is not available. Restoring it will make MMS work again.

Many people are wondering how to enable MMS on iPhone 6 due to changes in the operating system interface. The usual "Create MMS" link is not here. Therefore, you will have to try hard to send a multimedia message to your iPhone.

Before activating this option, you must make sure that the entered data is correct. The MMS function in iPhone 6 will not work if the network is configured incorrectly.

How can I make sure that the existing settings are correct? To do this, you must adhere to the following instructions:

1. On your iPhone, visit Settings - Messages. Go to the "MMS" section. Check if this option is enabled. If not, you need to move the switch to the On position.
2. In the smartphone settings, look at “General” - “Cellular data”. Activate this option using a similar principle.
3. Check the Internet availability on the gadget. It is best to launch the browser and try to load this or that page. If everything works, it is recommended to move on.
4. How to enable MMS on iPhone 6? When all of the above steps have been completed, you can simply remove the SIM card from your smartphone and insert it again.
5. Reboot your phone. It's hard to believe, but sometimes this technique helps restore the functionality of most services.

It also happens that all the steps listed above did not help. You can enable MMS on iPhone 6 (MTS or any other operator is not so important) by making adjustments to the network settings.

Data Validation

How to do this? Everything is simpler than it seems. Especially if the user has data for MMS and the Internet in general. What does it mean to check that your network settings are correct?

The following steps must be followed:

1. Turn on mobile phone. Wait until it is fully loaded and ready to use.
2. Go to the "Settings" - "General" - "Cellular Data" section.
3. Click on "Cellular Data Network".
4. Scroll to the very bottom of the page. There will be a field for working with MMS. Enter the correct data for working with the cellular network. They must be clarified with the operator. An example for MTS will be given later.
5. Save changes.

That's it. As soon as all the above steps are completed, the smartphone will start working with MMS. iPhone is configured to transfer multimedia data in this way.

Factory settings

But what to do if even the listed actions could not bring the option back to life? How to enable MMS on iPhone 6? You can try to return your smartphone to factory settings. Sometimes this technique really helps.

To reset your gadget to factory settings, you need:

1. Go to "Settings". There, visit “General” and select the “Reset” menu item.
2. Click on "Reset network settings".
3. Confirm the actions and reboot your mobile phone.
4. Remove the SIM card and reinsert it into the iPhone.

Usually the technique turns out to be very effective. If it does not help, it is recommended to contact your mobile operator to resolve the problem. Or take the iPhone 6 to a service center. It is possible that this is where the owner of an Apple smartphone will be able to get help.

For new devices

Can't send MMS from iPhone 6? MTS or any other operator is not so important. After all, the principles for setting up the service are the same for all companies!

Often problems with sending multimedia messages arise on new smartphones. I wonder how to enable MMS on an iPhone 6, which is turned on for the first time with a new SIM card? The answer will not be long in coming!

The thing is that when connecting a new SIM card and registering the device on the network for the first time, the user receives a special message from the operator. It is required for setup mobile internet and MMS exchange. You will need to open the letter and select the “Save” function there.

Sometimes it doesn't help. Then, as already mentioned, you need to enter the connection settings manually. The relevant information is clarified with the mobile operator.

Enabling MMS for MTS

How to set up MMS on iPhone 6? MTS offers the following data for the successful operation of the function:

• APN - mms.mts.ru;
• username and password - mts;
• proxy - 192.168.192.192.8080.

This information must be entered into the appropriate fields on the iPhone in the “Cellular Data Network” section.

But that's not all! To complete the operation, you need to send an MMS to 8890. Done! From now on, it’s clear how to set up MMS on iPhone 6 (“MTS”). You must act in the same way when working with any operator.

Results

Now it’s clear how the MMS function is turned on in iPhone 6. Similar recommendations and advice are suitable for all Apple smartphones and mobile operators. It is impossible to say exactly which method will help restore MMS functionality. It is recommended to start by restarting your phone. Next, check the functionality of the network, and only then proceed with the connection settings.

1. Take the problematic iPhone along with the SIM card to your mobile network operator. It is possible that the company’s employees will help organize the transmission of multimedia messages. No?
2. Then you can safely take your Apple smartphone to the service center. Most likely, disturbances in the transmission of MMS are caused by some kind of breakdown, which we could not fix on our own. For a fee, service center employees will diagnose the device and then eliminate the reason for the MMS failure to work.

You can insert the SIM card into another phone, save the network settings there and send a test multimedia message. Is everything working? Then the problem really lies with the iPhone. No? Under such circumstances, problems with the mobile operator or SIM card cannot be ruled out.

In any case, it is now clear how you can enable MMS on iPhone 6. In reality, everything is much simpler than it seems. The main thing is to know the data for setting up the network and follow strictly the instructions for correcting this malfunction, using different methods.

For those who are interested in how to enable MMS on iPhone 6, you first need to activate the function in the message settings section. Next, check and adjust the network data. Sometimes resetting the parameters and restoring factory settings helps resolve the error.

If there is a failure when sending a multimedia message, the question arises of how to enable MMS on iPhone 6 or another device. First you need to make sure that the function is supported by the operating system. Then all that remains is to adjust the network data.

Why problems arise

Problems with sending multimedia messages occur due to various reasons. Most often, the network data on the device is entered incorrectly or is missing. How to enable the MMS function on iPhone 6 in this case? You will need to reset the parameters and enter the correct data through the device menu.

Problems may arise due to lack of internet connection. To check network availability, you need to turn off Wi-Fi and try to go to any website.

Certain difficulties in how to enable the MMS function on iPhone 6 are caused by the system interface, although it is simplified to the limit. The list does not contain the usual “Create MMS” link. To find out where to enable the option, you should better familiarize yourself with the features of working with the device.

Several ways to connect to the service

Before you enable the MMS function on iPhone 6, you need to check that the settings are correct. Proceed according to the following algorithm.

1. From the main screen, click on the “Settings” icon, go to “Messages”. Find “MMS messages” in the list and check if the option is enabled.
2. In the same menu, go to the “General” section, where you need to enable "Cellular Data". This option must also be active.
3. At this stage it is worth checking your Internet connection. Turn off Wi-Fi and access any website. If the function works, the problem is not a lack of network access.
4. If after all these steps multimedia messages are not sent, remove the SIM card from the device, then insert it back.
5. In some cases, rebooting the device helps correct the situation.

If, after all attempts to enable the MMS function on iPhone 6, sending still does not occur, it is worth adjusting the network data.

How to check if network data is correct

To check whether the parameters have been entered correctly, you need to open the MMS service in the system.

1. From the main screen go to “Settings”, then to “General” and "Cellular Data".
2. Next, click on "Cellular data" and look at the section menu. Select the item.
3. Scroll down the list and find where to enable MMS.

When registering on the network for the first time, the device automatically finds an operator and enters parameters. If this does not happen, the fields in this field will be empty. It happens that even if the data is entered, the function of sending and receiving multimedia messages does not work. In both cases, you need to fill out these fields and enter the correct data.

You can receive the parameters via SMS. To do this, you need to contact the operator by service phone and leave a request. The data can be found directly on the operator’s website.

How to return to factory settings

If the multimedia messaging function is active, all that remains is to reset the network data. To do this, you need to perform the following steps.

1. Go to “Settings” from the main menu.
2. Go to the “Basic” tab.
3. From the list, sequentially select the items “Reset”, "Reset network settings".
4. Reboot the device.
5. To complete the reset, turn off the iPhone, remove the SIM card, install it back and turn on the device.

Important: You will have to wait some time before completing the reset operation described in the third paragraph. The process should not be interrupted.

After completing all these steps, you can try sending a multimedia message. If, after all attempts to enable the MMS function on iPhone 6, a failure occurs, you should contact your operator. To do this, you should call the service number and listen to the instructions from the autoinformer.

When talking with a consultant, you need to describe your problem and ask to activate the service.

Instructions for the new iPhone

The question of how to enable the MMS function on iPhone 6 also arises after purchasing a new device. When registering a device, in most cases the subscriber receives a service notification with parameters for accessing the Internet and sending multimedia messages. It should be preserved.

There are times when to use automatic settings failed. How to enable the MMS function on iPhone 6 in this situation? You can try entering the parameters yourself. They are located on the official website of the mobile operator.

For example, for MTS subscribers there is a “Help” section on www.mts.ru. In the list that opens on the left side of the page you can find where to enable your operating system, and click on this link.

In the center of the page there is a list of MTS parameters that should be entered, and a short instruction on where to enable the device functions.

You need to go from the main screen to “Settings”, then the “Cellular” subsection, item "Cellular data network".

The list of parameters that allows you to enable the MMS function on iPhone 6 with the MTS operator looks like this:

• access point (APN) – mms.mts.ru;
• name – mts;
• password – mts;
• proxy (in one line) – 192.168.192.192:8080.

To finish connecting the service, send an MMS text to 8890.

What is needed to exchange MMS

Although there is no “Create MMS” option in the menu, once the option is enabled, sending will not be difficult. There are two main ways.

You need to go to the “Messages” item. Click the new message icon in the upper right corner of the screen. In response, a text field will open.

In fact, you can send any message through this section. To add a picture, click on the camera icon, which is located to the left of the text entry form. In the menu that opens, select: take a new photo or send a picture from your gallery.

Once the image is selected, all that remains is to add the recipient. To do this, click on the plus sign, then select a contact from the list. All that remains is to indicate the topic and press the “Send” button.

Important: a message can be sent to a group of users.

How to enable the MMS function on iPhone 6 and send an image directly from the gallery? To do this, on the selected photo you need to click on the arrow icon, which is located in the left corner at the bottom of the screen. In response to this command, a menu for sending an image will appear. Click on the link "Send via MMS".

After this command, a field for creating an MMS will be displayed on the screen. You can add text to the image and also specify a theme. All that remains is to select the recipient from the contact list and press the “Send” button.

Sending a new photo via MMS

There is a third way to enable MMS on iPhone 6 and send a photo. This can be done directly through the camera menu.

Click on the thumbnail of the new photo. After that, it will be displayed on the entire screen. At the bottom you can see an arrow icon. Clicking on it will open the image upload menu.

Problems with multimedia messaging occur for various reasons. Most often this happens due to incorrect data. Before you enable the MMS function on iPhone 6, you should check the activity of the corresponding parameters.

If necessary, you can reset the data yourself. If restoring factory settings does not help, most likely the problem is with the operator. It is worth contacting your network consultant using the service number.

How to set up MMS on iPhone?

Although MMS has long lost its relevance, the user Apple iPhone It may still be necessary to send or receive a multimedia message. But before you can send or receive MMS, your Apple smartphone must be configured correctly.

As a rule, at the first turning on iPhone with an operator SIM card, the smartphone automatically receives all the necessary data and settings so that you can immediately start using communication services without unnecessary settings.

But, of course, there are situations when the settings could not be configured successfully, as a result of which you cannot use a service such as receiving or sending MMS messages.

To get to the MMS settings, open the application on your device "Settings" and go to section "Cellular data network" . In the window that opens, you can find the section "MMS" .

If you see that the columns are absolutely not filled in, then you will have to take the settings into your own hands. Below we will look at data for four popular operators in Russia.

Setting up MMS for mobile operator Megafon

2. Username – Megafon MMS

4. MMSC – http://mmsc:8002

5. MMS proxy – 010.010.010.010

Setting up MMS for the mobile operator MTS

1. APN – mms.mts.ru

2. Username – mts

3. Password – mts

4. MMSC – http://mmsc

5. MMS proxy – 192.168.192.192:8080

6. Max. message size – 512000

7. MMS UAProf URL – leave field blank

Setting up MMS cellular

1. APN – mms.beeline.ru

2. Username – beeline

3. Password – beeline

4. MMSC – http://mms

5. MMS proxy – 192.168.94.23:8080

6. Max. message size – leave the field empty

7. MMS UAProf URL – leave field blank

Setting up MMS for mobile operator Tele2

1. APN – mms.tele2.ru

2. Username – Tele2 MMS

3. Password – leave the field blank

4. MMSC – mmsс.tele2.ru

5. MMS proxy – 193.12.40.65

6. Max. message size – leave the field empty

7. MMS UAProf URL – leave field blank

After entering the necessary parameters in accordance with your operator, close the settings window. They should take effect immediately, so you can use MMS now.

Apple confidently occupies a leading position among developers of modern equipment. Laptops, tablets, smartphones - any position from this company deserves only praise and respect. iOS OS, which is responsible for the operation of iPhones, provides its users with a convenient, accessible and simple interface that everyone can understand. However, when you pick up a newfangled gadget for the first time, you can quickly get confused in the various options. How to deal with this and correctly configure the MMS function on the iPhone? Let's look into it in more detail!

On modern devices sending MMS is not much different from regular SMS messages

On any iPhone you can set up a convenient and useful function sending MMS messages. The only peculiarity is that here it is called completely differently than on regular phones, and the setup procedure is also different. Depending on the model (6s, 5s), parameters may differ.

For example, for iPhone 4/5 the procedure looks like this:

• go to “Settings”;
• select "Cellular";
• turn on the “Cellular Data” option (just move the floating button to the right);
• Log in to Cellular Data Network.

Here you need to enter the information provided by the operator whose services you use. You can find such settings on the company’s official website. The equipment usually detects the operator automatically, and then “pulls up” the necessary fields for MMS and the Internet in the settings.

If MMS are not sent with the automatically provided parameters, try entering everything manually.

For YOTA operator:

• APN - mms.yota;
• MMSC - mmsc:8002;
• image size - medium;
• The username and password fields are not required.

If you use the services of MTS Moscow, we recommend entering the following:

• username - mts;
• apn - mms.mts.ru;
• proxy - 9201;
• mmsc - https://mmsc;
• image size - medium;
• password - mts.

We advise everyone who uses a SIM card from Megafon on their iPhone 5s to enter “mms” in the APN field, and 10.10.10.10:8080 opposite proxy. It is better to leave the size of the picture medium, and not fill out the password and login fields at all.

Beeline Moscow cardholders can install the following instructions:

• username/password - beeline/beeline;
• proxy - 192.168.094.023:8080;
• picture size - medium;
• APN - mms.beeline.ru.

This completes the configuration, check that the entered data is correct and go ahead to work!

Submission methods

If you managed to enable MMS on iPhone 5s, try sending this message. There are several ways to do this, let's look at each of them in more detail.

First method:

1. Open the Messages folder on the product desktop.
2. Click on the icon of a piece of paper and a pen/pencil.
3. Select the recipient in the message creation menu, click on the icon that shows the camera.
4. Select the required file in the “Media Library” section.
5. Click on "Take a photo or video" if you want to save something in real time.
6. Sign if required.
7. Click on "Submit".

Second method

This method is not used very often. In this case, the message is sent during the process of taking a picture from the camera. So:

• take a photo;
• click on the photo you were able to take;
• When expanded to full screen, you can see an arrow at the bottom. By clicking on this arrow, you can immediately send the image to another recipient.

Third method

In this case, MMS can be sent directly from the gallery. To do this, it is important to be in the “Photos” folder and select a video or picture to send (check the boxes for the files). Next, click on the icon below and select “Message”. At the last stage, the text and the recipient are added, after which the sending is carried out.

Interestingly, a number of operators set the maximum possible file size for sending, which is no more than 1 megabyte. Often, it is not possible to send an image larger than 1–2 megabytes the first time; we recommend that you try again.

Note that sometimes, after changing the settings, you should reboot the device.