The safety of the driver and passengers directly depends on the quality of this part of the car. The brake disc is one spare part that should not be saved when choosing. There are various manufacturers on the market, and not all of them have the right quality.

In our review, we considered companies whose brake discs are reasonably considered the most reliable and best. The ratings in the rating were made on the basis of the characteristics declared by the manufacturer, as well as the opinions of service center specialists and owners who installed this product a certain brand.

Best Inexpensive Brake Discs

The products of the manufacturers represented in this category are the best of the entire range of budget segment brake discs.

5 Nipparts

Domestic Buyer's Choice
Country: Netherlands
Rating (2019): 4.4

The Dutch company Nipparts provides a large part of the European market with high-quality spare parts that comply with TUV and ECE R90 certificates for Japanese and Korean cars. Constantly expanding its range, Nipparts today represents more than 16,000 items for the vast majority of Asian car brands. Strict control and testing during the production process has significantly reduced the number of defects.

Brake discs, as well as other spare parts of the Nipparts trademark, have proven themselves well with the domestic consumer. The choice in its favor largely determines the best value for money. These spare parts will last a long time and provide efficient and timely braking, which is the most important characteristic for any car.

4 Avantech

Low vibration
Country: South Korea
Rating (2019): 4.7

Spare parts for cars manufactured at the factories of this South Korean manufacturer go both to the secondary market and to the conveyors of well-known auto giants KIA and HYUNDAI, which indicates their impeccable quality and reliability. At the same time, the price for this product is an order of magnitude lower than for a similar group of products from other companies. Avantech brake discs meet the most stringent requirements, providing a highly effective safety system. This is confirmed by the cooperation with Mitsubishi Motors and the presence of its own team to participate in racing competitions.

In the manufacture of discs, a heavy-duty cast iron alloy with an admixture of carbon is used, and a special paint for processing, which reliably protects against corrosion. Heat resistance prevents disc breakage or deformation under heavy loads. The STOP and GO technology used in production guarantees a better grip on the pads, thereby reducing the lapping time. Avantech brake discs operate with minimal noise and vibration, which also has a positive impact on the popularity of this brand.

3 Bosch

Best price
Country: Germany
Rating (2019): 4.7

German manufacturer of construction and household appliances, engaged in the production of high-quality auto parts. There are legends that Bosch devotes the lion's share of time to testing its products - every brake disc that is produced undergoes bench tests.

The company ships products not only to the secondary market (in retail), but also cooperates with major world concerns: Renault (popular on Logan and Megan models), VAG-ovskoy Skoda (Octavia and Fabia models), Nissan, Korean Kia "(Rio and Optima models) and Hyundai (Elantra and Solaris models). The brake discs show the best performance with a moderate, calm ride, but during emergency braking, the performance drops sharply. This limitation is compensated by the price - it is almost two times lower than that of the leading brand.

Advantages:

• low cost;
• ideal for urban driving conditions;
• suitable for European and Asian cars;
• the brand cooperates with many global automakers (which indicates great trust and high quality components).

Flaws:

• during emergency braking, the efficiency of the discs is reduced.

2 NiBk

The optimum ratio of price and quality
Country: Japan
Rating (2019): 4.8

A young manufacturing company from Japan, which began its activities in 1998. It is part of the large concern JNBK Corporation, which specializes in the production of parts for brake systems. It produces brake discs not only for cars in its country - since dealerships are "stuffed" in Russia, Europe and even America, the true coverage of the market is amazing. Very often, NIBK discs can be found on Solaris cars. But on Russian car models, like Priors or Grants, brake pads from this manufacturer have taken root more. In general, user reviews about the operation of disks are complementary - they like both the quality and the cost of the Japanese manufacturer's products. And what else can you expect from a company that is in the top ten in terms of the production of brake system components?

Advantages:

• well-established work of dealerships (relevant for Russia);
• high quality of manufactured products;
• low cost (with a negligible exception);
• wide coverage of automobile brands.

Flaws:

• not detected.

1 Ferodo

Large market coverage. High quality
Country: Great Britain
Rating (2019): 4.9

Brake discs from the largest British concern Federal Mogul cover almost 95% of the European car market. Since the company deals exclusively with brake systems, the quality of the products is appropriate, which is a decisive factor in the priority of automotive manufacturers.

We all know about the problems of "clumsy" brakes on sports or executive class cars with alloy wheels. Ferodo solved this problem in brilliant style by developing a series of special anti-corrosion COAT+ discs. If such quality is achieved on such high level, then talking about budget cars does not seem necessary at all. Great company with great products at a reasonable price.

Advantages:

• creation of brake discs special technology non-linear processing;
• favorable price with high quality products;
• large market coverage.

Flaws:

• not detected.

The best brake discs in the middle price segment

5 blue print

The shortest stopping distance
Country: England (produced in South Korea, Japan)
Rating (2019): 4.4

The Blue print manufacturer offers the widest range of spare parts for cars of different brands. The products are of high quality and reliability, due to the fact that most of them are manufactured in factories in Japan. Implementation the latest technologies and strict control of all stages of production, made it possible to satisfy the most inflated requirements that are reasonably placed on the part in the main system of the car.

The use of Blue print discs guarantees safety and comfort while driving. They significantly shorten the braking distance without causing vibration and extraneous noise. For the production of discs, only high-quality steel is used, which provides a fairly long service life. Implementation modern technology perforation of the working plane had a positive effect on the clutch properties of the brake disc.

4 MASUMA

The lowest marriage rate
Country: Japan
Rating (2019): 4.6

The well-known Japanese manufacturer, whose factories are located in China, Korea, Japan and Taiwan, offers middle-price segment parts to the secondary auto parts market that meet the highest quality standards. This is confirmed by the fact of many years of cooperation with conveyors of concerns Toyota, Honda, Nissan, etc. This company has established itself as the best fighter against marriage - illiquid assets account for less than 0.6% of all products.

The popularity of MASUMA brake discs on domestic market due to their reliability and more affordable price compared to factory originals. It is for this reason that there is a risk of stumbling upon a fake, and in order to avoid this trouble, it is necessary to carefully approach the choice of a supplier. You should also visually assess the quality of the material itself, and remember that all MASUMA parts are provided with their original packaging with the appropriate code and inscription.

3 Schneider

Best Mid-Range Racing Series
Country: Germany
Rating (2019): 4.7

German wheels designed specifically for the needs of extreme driving. Structurally, they include both perforation and ventilation to reduce the effect of temperature changes and effectively remove gases from the friction zone of the pads on the disc.

There are legends that these brake elements are especially well combined with pads from Ferodo - they say that the latter have a high coefficient of performance and wear less during aggressive driving. In fact, pads from any manufacturer, sharpened specifically for extreme driving, are suitable here, since in the process of driving they have to take on all the shortcomings of the road. The main feature of Shneider brake discs is the straight rib structure, which ensures optimal airflow.

Advantages:

• ideal for extreme driving (used mainly in racing);
• combination of ventilation and perforation of the working surface;
• acceptable cost.

Flaws:

• in urban conditions do not reveal their full potential;
• contribute to the rapid wear of the brake pads.

2 Lucas (TRW)

Wide the lineup
Country: Germany
Rating (2019): 4.8

The once independent company Lucas, now part of the largest European corporation TRW, is engaged in the creation of a "detail" only for brake systems. Some models of brake discs are supplied to VAG production lines (for middle-class cars from Volkswagen and Opel), but the bulk of the products are shipped to the secondary market.

A distinctive feature of the brake discs from Lucas is the glossy black color, which, in fact, relieves both manufacturers and the driver himself of the need to apply oil and anti-corrosion compound to them. In the assortment of the company there are also special models that have a high degree thermal conductivity - they are light, have stable characteristics braking and are less prone to the development of defects associated with heating.

Advantages:

• a large number of budget options for brake discs;
• a distinctive feature of the standard series (discs painted in gloss black);
• the bulk of the products are shipped to the secondary market.

Flaws:

• users sometimes have questions about the low performance of standard series drives.

1 Brembo

User Choice
Country: Italy
Rating (2019): 5.0

Products of the Italian manufacturer, so loved by the domestic user. In contrast to the NIBK company, from which pads take root on VAZ cars, Brembo brake discs are excellent. This is not surprising - a strong middle peasant both in terms of cost and quality, is always looking for new ways to develop its own products. The result of such research was a decrease in the wear of the working surface of the discs and an increase in the warranty period of operation up to 80 thousand kilometers.

In addition to the production of discs for conventional cars, Brembo also develops concepts for sports cars. However, after successful application on the latter, the latest developments go straight to the mass market.

Advantages:

• constant updating of the model range;
• introduction of new technologies into production;
• the presence in the assortment of standard and sports series of brake discs.

Flaws:

• not detected.

The best premium brake discs

These products are of impeccable quality, the level of which justifies the high cost of brake discs.

5 FREMAX

The best combination of price and quality
Country: Brazil
Rating (2019): 4.7

Premium car spare parts are offered on the world market by the Brazilian manufacturer FREMAX. This company is the official partner of the most popular racing competitions in South America: Stock Car Brasil and Porsche GT3 Cup Brasil, cooperating most closely with MITSUBISHI. The company maintains full control over all stages of production and invests heavily in innovation to ensure the production of the best and safest braking systems.

FREMAX products are delivered in a unique cylindrical plastic package with an air valve, which reliably preserves the goods during transportation over long distances by water. After opening the container, the discs are immediately ready for installation and do not require degreasing, which was made possible thanks to the Ready To Go technology. Strength, reliability, durability and safety are the main distinguishing characteristics of FREMAX brake discs, which will become the best choice for any car.

4 DBAs

The most high-tech
Country: Australia
Rating (2019): 4.8

The only reason why these drives do not take the leading position in the rating is the high price, which even in the premium segment makes you draw attention to yourself. The product is ideal for modern cars, having proven itself in extreme working conditions. Top-of-the-line brake discs are built using Kangaroo Paw's high-tech development, which ensures efficient cooling and resistance to overheating.

The T-Slotted system ensures slow and even wear. The presence of perforations and notches on the working surface make it possible to maintain the high efficiency of the system when even a large amount of water gets into the places of contact with the pads. The perfect quality and efficiency of DBA brake discs is undeniable and is guaranteed by the impeccable reputation of the manufacturer.

3ATE

The best quality of manufactured products
Country: Germany
Rating (2019): 4.8

A company that is part of Continental Automotive Systems Corporation, which is one of the best highly specialized manufacturers of brake system components. Perhaps no other concern can compare with ATE in terms of the number of deliveries to conveyors - they cooperate with the brands Audi, Skoda, Ford, BMW, Toyota and many others.

One of the prides of the company is a series of tuned Powerdisk disc brakes that can withstand crazy overheating up to 800 degrees Celsius. This is facilitated by the presence of a chute and grooves, due to which not only the removal of gases and liquids from the working area occurs, but also the effective cooling of the main components of the brake system.

Advantages:

• cooperation with a number of automobile concerns (including the Russian VAZ);
• the prevalence of parts in the secondary market;
• high wear resistance and braking efficiency.

Flaws:

• not identified.

2 Otto Zimmermann

High wear resistance
Country: Germany
Rating (2019): 4.9

An old German company whose products entered the market as early as 1947. Since then, most of the laurels have been attributed to it, ranging from an adequate pricing policy (contrary to many other premium companies) and ending with the best parameters wear resistance. Contrary to the assertion that "oldies" do not like to change the concept of production, Otto Zimmermann is constantly looking for new solutions. Take, for example, the Sport series of brake discs designed for extreme driving. In the catalog of this series there are more than 500 models, constantly supplemented and modernized.

Otto Zimmermann disc brakes are used mainly on Volkswagen Group cars, and the coverage of car models is very extensive - from mid-range Volkswagen or Opel cars to supercars like Bugatti and Porsche.

Advantages:

• a wide range of products;
• highly variable price range;
• decent market coverage (but more than European).

Flaws:

• work mainly with German automakers.

1 EBC

The choice of professionals
Country: UK
Rating (2019): 4.9

The brake discs of this company are quite expensive, but the high price is more than justified by unsurpassed quality and performance. This ensures high efficiency of the braking system and is a valid reason for choice by sports car owners (Ultimax series) and simply by speed riders. The latter choose the more affordable Turbgroove range - such brake discs can be found on Subaru, Infinity, Honda and other car brands that are distinguished by good dynamics.

For luxury cars, there is a wonderful alternative to factory products - Premium series brake discs are in stable demand among wealthy owners. The quality corresponds to the price level and does not cause any complaints from the most demanding customers.

How to choose good brake discs

The choice of brake discs is not an easy task, especially for novice drivers who are just learning the basics of the technical device (and capabilities) of a car. In order not to miscalculate with the purchase and choose the perfect set of "parts", use a few useful tips:

1. Check out service book personal car . Namely, find in it the item "brake system type". The main difference here is in the type of drive: most passenger cars are equipped with hydraulics, while trucks and some SUVs are equipped with a pneumatic or combined system. Hydraulic boost is effective, but it is the pneumatic drive that facilitates braking.
2. pay attention to design features. The production of parts and auto components has reached a level where manufacturers can afford to experiment with design, materials and manufacturing technology. The most predictable are the standard brake discs - they are as balanced as possible and resistant to thermal deformation. But if you look at the future, then ventilated discs, suitable for the urban cycle of movement, are gaining great popularity. The original shape contributes to efficient cooling of the discs, which is very useful for frequent changes in speed and constant braking.
3. Before installing discs, decide on their diameter. This is the main characteristic of the brake elements. The larger the diameter of the disc, the larger the brake pads that complete them, and, accordingly, the higher the braking efficiency.
4. Presence of perforation. Holes on the surface of the disc have a positive effect on the removal of the gas cushion that occurs during the friction of the surfaces of the pad and disc. The perforated surface also helps wick away moisture.
5. The presence of radial notches. These are special grooves designed to clean the working surfaces of brake discs from the smallest particles of wear pads and dirt that gets in while driving on the road. In addition, notches contribute to uniform wear of the brake pads during operation.
6. Anti-corrosion coating. An important parameter that ensures the protection of brake discs from rust. Various types of anti-corrosion agents are used as a coating, and this should also be considered when choosing good discs.

Each car owner sooner or later in the process of using his "iron horse" faces the issue of repairing the car's brake system. This system is a rather complex mechanism, which consists of a large number of pipes, cylinders, brake discs, pads, brake fluid and other things. Some of the listed components do not cause problems if they need to be changed, but some give the driver a lot of difficulty when looking for a new spare part.

This is due to the huge number of low-quality fakes in the markets. Of all the above, brake discs are most often counterfeited. All this led to the need to explain to the consumer which company brake discs are better to choose, how to properly operate them, at what wear to change brake discs and how not to get fake, because this part is quite expensive. First, let's look at the reasons for replacing old disks with new ones, as well as the signs by which you can determine that this part needs to be replaced.

When to replace
One of the main signs is the beating of the brake pedal when you press it. This suggests that your disk (one or more), as they say, "led." In other words, he twisted. This often happens when used incorrectly. After a long period of inactivity, the brake discs are often covered with a layer of rust. After starting, you need to lightly press the brake pedal so that the pads clean the disc. A similar solution is applied after driving through a large puddle. A wet disc must be dried. This is done by intermittent light pressure on the brake pedal. Pressing is strictly prohibited!

All discs are subject to wear. If you don't know her then go to the station Maintenance, where they will measure the disk for you and at the same time check its plane for curvature. At the slightest sign of wear, the disc must be replaced. Your life and the life of your passengers directly depends on it. The question is often asked: “At what mileage do the brake discs change?”. There is no single answer to this. It all depends on the operating conditions. If the driver uses engine braking more often, then the discs pass more, if vice versa, then less. Wear also depends on the brake pads.

What are brake discs
Economy option(Perfect for drivers who prefer a moderate, quiet ride). They are produced by such companies: AvtoVAZ, STARLINE, FERODO, ABE, TEXTAR and many others. Prices range from $50-$200 per pair. The disadvantage of such discs is not very high-quality manufacturing. But even among them it is possible to find good ones that will serve the buyer faithfully for long tens of thousands of kilometers;

Medium price option(suitable for those who prefer to press the pedal, both accelerator and brakes). They are represented on the market by the following companies: RoadHouse, Zimmermann, ATE, Nipparts, TRW. Prices from 200 to 500 dollars. Among them you can find budget options for branded products. Such discs are already of higher quality, but the number of counterfeit options has increased among them;

Brand(for lovers of aggressive driving, for cars that take part in different types auto racing). This category includes such brands as: "BREMBO", "VALEO", "BOSCH". The cost of the most expensive copies can reach 1000-1500 dollars. Improvements include the use of more expensive materials, an improved manufacturing process.

Brake discs by type:
1. Non-ventilated discs (economy option);
2. Ventilated discs (middle price option);
3. Combined wheels (expensive, branded and not only).
Lots of options, right? Often without outside help it is difficult to separate the worst option from the best without losing financially.

Which brake discs and pads are best?
Perhaps this is one of the most common questions when repairing the brake system. It should be mentioned that along with the discs, the pads must also change. Using old ones is strictly prohibited! To date, there are dozens of companies producing discs. The most demanded: "STARLINE", "Zimmermann", "FERODO", "Nipparts", "BREMBO", "BOSCH".

It is quite difficult to single out which manufacturer of brake discs is better or worse, because they all differ in price and manufacturer. Among the cheap ones, AvtoVAZ products are popular, since we have quite a lot of corresponding cars in our country. Do not bypass "FERODO". When buying products from these manufacturers, carefully inspect them for defects. Experience suggests that the presence of burrs on such discs is quite common. Of those on average price range, Zimmermann and BOSCH discs are popular, they have proven themselves to be reliable and durable. If you have no experience in buying brake discs, and you simply do not know which brake discs are best to take, then you need to refer to the owner's manual for your vehicle. There, the manufacturer indicated which discs according to the type of manufacture correspond to the technical characteristics of the car, what disc size is needed (for the size of the wheels, which is regulated by the car manufacturer), which front brake discs are better, which ones are better to put on the rear axle.

If there is a desire to carry out tuning, or simply the braking characteristics declared by the plant do not suit you, then the World Wide Web will come to the rescue. On the Internet, you can easily find reviews of brake discs by company. Often, people write on such forums who have already “eaten the dog” in this matter, or simply those who, from personal experience, can advise which company is better to install brake discs, and which should not be considered in the selection process. Brands such as BREMBO and VALEO have definitely proven themselves positively. The manufacturer has provided for all the factors that can affect the disc in extreme operating conditions. But you should not rejoice in advance, run to an ATM, withdraw money and go to the store for new, shiny discs. If you were told which brake disc company is better, this is not a reason to buy them right away. It should be noted that everything that is not regulated by the manufacturer is installed on the car, at the peril and risk of who will use this car. After all, it is best to use those parts that are prescribed in the operating instructions. Do not forget about the choice of brake pads. They should ideally fit the discs they will have to work closely with. Now you are already armed with knowledge about the best brake disc and pad companies. It remains to find out how to distinguish a fake from the original discs.

The original or a fake
1. Of course, before buying discs, you need to make sure that the part is original, and not made with a file and a chisel. A few buying tips: Buy discs only in service centers or from an authorized dealer. The probability of acquiring a low-quality part is minimal (in this case, the price may “bite” a little, but the question of which company to buy brake discs will disappear by itself);
2. If there is no dealer in your city, then find a normal store, read the reviews of people who purchased spare parts in this store.
3. Check up a disk visually on presence of furrows, roughnesses. Everything should be flawless.
4. Inspect the drive carefully before purchasing. On a product that is cheaper, there must be a seal "OTK". The presence of this sadness speaks of factory production. On disks that have a high price, as a rule, the name of the manufacturing company should be embossed.

The original code must also be present, which can be checked using "SMS" or on the manufacturer's website. When choosing such an important spare part, it is recommended to use only original brake discs and pads. You should not save, but you should not buy very expensive ones, that is, those whose characteristics are simply not needed for you and the car you drive.

VAZ 2110 is one of the most popular Russian models. The cost of consumables for Russian cars, as a rule, is cheap, and you can always save a lot. But there are nodes on which you should not save, it will cost you more. These components include the braking system.

The basis is the brake disc. Disc brakes on the VAZ 2110 are installed only on the front axle, in fact, there is the main force when braking.

Disks on the VAZ 2110 are divided, depending on the motor, as follows:

• 8 valve VAZ 2110 engines are equipped with R13 brake discs
• 16 valve VAZ 2110 engines are equipped with R14 brake discs

On the rims R14 brake discs cannot be installed on the 13th radius.

The minimum allowable thickness of the brake discs: for ventilated - 17.8 mm; for non-ventilated - 10.8 mm.

In view of low cost, many do not hesitate to put the original discs:

• 2108-3501070 - 898 rubles.

Today, perhaps, the most unfortunate and unacceptable option. Due to lack of ventilation, disk is overheating, which means that the brake fluid will overheat and boil, it is well felt when the pedal starts to go down. When the brake fluid boils, the effectiveness of the brakes drops sharply and you run the risk of being left without brakes at all.

• 2110-3501070 - 3758 rubles.

An improved version of the previous disc. The main improvement is the appearance of ventilation. The discs do not get as hot and behave well with a quiet ride.

• 2112-3501070 - 919 rubles.

Perhaps the best option among the original discs. Here you have ventilation and an increased contact area with the block. Therefore, you are less likely to overheat the drive and improved braking properties, compared to the previous options. Despite their advantages, these discs are not suitable for a driving style with constant brake loads, but remain reliable and comfortable brakes for a relaxed, everyday ride.

But the choice is not limited to the originals. VAZ 2110 is a popular model and a large number of analogues of brake discs are produced for it. So, if you want to save money, you can take the BM BD 5222.

• BM BD5222 brake disc r13 front not ventilated, price from 512 rubles.
• BM BDV221 brake disc r13 front ventilated, price from 622 rubles.
• BM BDV220 brake disc r14 front ventilated, price from 842 rubles.

BM discs are made in China, and you can't count on improving the quality of braking. The main advantage of these discs is the price, which in percentage terms is significantly less than the original discs. But due to the low cost of original discs, the real savings are negligible and it's better to overpay a little and put the original discs.

Thus, there is no point in chasing cheapness, but you can choose an analogue to improve the quality of braking, but here you have to overpay compared to the original ones.

• TRW DF1748 brake disc r13 front not ventilated, price from 893 rubles.
• TRW DF4108 brake disc r13 front ventilated, price from 920 rubles.
• TRW DF4107 brake disc r14 front ventilated, price from 1013 rubles.

TRW is a good option. The brakes under normal conditions are comparable to the originals, but in extreme conditions they behave much better. Disks withstand heat better, cool down faster and provide better braking.

• Brembo 08.5211.10 brake disc r13 front not ventilated, price from 784 rubles.
• Brembo 09.8894.14 brake disc r13 front ventilated, price from 1100 rubles.
• Brembo 09.8903.14 brake disc r14 front ventilated, price from 1063 rubles.

Many choose Brembo for their sporty history. Brembo discs are a really high-quality product, although they are far from their sports developments. But VAZ is not a sports car, so Brembo wheels fully meet the requirements of the car. Brembo's are heat resistant and provide excellent braking in all conditions.

• Ate 24.0112-0125.1 brake disc r13 front not ventilated, price from 990 rubles.
• Ate 24.0120-0186.1 brake disc r13 front ventilated, price from 1590 rubles.
• Ate 24.0120-0187.1 brake disc r14 front ventilated, price from 1596 rubles.

Ate is significantly more expensive than the original discs. But there is something to pay for: high quality materials, comfortable and predictable braking in any conditions, resistant to overheating and deformation. And most importantly, everyone who decided to install is very satisfied with both the new brakes and their resource.

Prices are for Moscow and the region as of winter 2016.

Hello dear car enthusiasts! The question of which brake discs are better is as eternal as the different answers to it.

On car forums dedicated to this or that car model, you have already met inadequate answers to the question more than once: tell me which brake discs should I choose or which brake discs of well-known brands, such as: delphi, bosch, zimmerman and so on.

And so answers sometimes surprise with the immediacy and inadequacy. For example: Brembo brake discs or ate brake discs suck. I did not change the brake pads in time, they were worn down to iron and ... the Brembo brake discs could not stand it ... cracked.

That is why, the question of which brake discs is better is not entirely correct. Why? Yes, because the manufacturer puts average performance data into their characteristics, and we use brake discs each in our own way.

This happens for many reasons, one of which is driving style. Agree that dba brake discs, although they are designed for lovers of active driving, they also have a tensile strength. Especially if the driver manages to move around the city with constant speeding and, accordingly, constant braking in emergency mode.

What you need to know when choosing brake discs for a car

Naturally, first of all, you are guided by your experience. And, if you constantly operate brembo brake discs with pleasure, then ebc brake discs, the reviews of which will be the most wonderful, you don’t need for nothing.

The second is general knowledge about brake discs.

Standard (regular) brake discs car are made, as a rule, of cast iron and processed by a milling method. Standard brake discs exist, both ventilated and non-ventilated.

The difference between the ventilated brake disc in the design: two discs are interconnected by bulkheads.

Standard (sport) brake discs. Their difference from the regular one is a denser alloy (naturally, you cannot determine this by eye) and the presence of notches. The task of the notches is to remove combustion products during an aggressive braking style.

Almost all sports brake discs are ventilated. Some are perforated, but perforation of cast-iron brake discs leads to a significant loss of strength.

Unfortunately, fake brake discs of famous brands have become commonplace. And therefore, when buying, you are unlikely to be able to determine the quality of the brake discs. But after installing them on the car, you should pay attention to the following points during operation:

• beating during braking - the first sign of either improper installation of the brake disc, or poor-quality brake disc material;
• beating during movement is a sign of a violation of the symmetry of the brake disc, that is, its inaccurate execution;
• rapid, increased wear during normal use of the disc in normal operation, indicates a low density of the brake disc alloy.

In any of these cases, it is necessary to diagnose the brake discs and require the seller to fulfill the terms of the warranty. Naturally, provided that the brake discs are purchased from an authorized dealer. If you were chasing the price and bought the wheels from the car market, then there will be no one to ask.

To navigate a wide range of spare parts, in particular brake discs, you should know that our car spare parts market is mainly supplied in three directions:

• original brake discs, that is, those that go directly to the conveyor when assembling cars;
• original and non-original brake discs with aftermarket (aftermarket) target direction for the spare parts market from the manufacturer;
• brake discs, as well as other spare parts that are manufactured for third world countries.

How to choose the right brake discs for your car

Let's start with the fact that traditionally, brake discs: Brembo, EBC, DBA are designed for lovers of an active, aggressive style of movement.

Brake discs: Zimmerman, Bosch, ATE for quiet city driving. Naturally, this gradation is conditional, since each brand has different modifications of brake discs.

The ideal option when choosing discs is to purchase and install brake pads from the same manufacturer. This is due to the fact that the manufacturer makes brake pads and brake discs from adapted materials. We are talking about original and non-original spare parts.

The price and packaging of brake discs, unfortunately, is no longer an indicator that you are purchasing an original or non-original spare part. Therefore, the purchase of brake discs should be carried out only from trusted official dealers - car dealerships. With relevant supporting documents: checks, guarantees and so on.

Next, you need to remember - there is no definite figure for the service life of brake discs, nor to thousands of kilometers. mileage, or in terms of operation. On each brake disc, the manufacturer indicates the permissible wear of the brake discs in mm. Well, then, you already include your driving practice and experience in using brake discs of a particular brand and model.

In any case, when choosing brake discs: Brembo, Zimmerman, Delphi, Bosch, and so on, be guided not by the reviews of individual motorists, but by the technical specifications and recommendations of the brake disc manufacturers and the manual for your car.

Brake discs have a degree of wear. In addition to the standard service life, wear is affected by operating conditions (braking intensity, weather conditions, brake pad and caliper compatibility).

How do you determine if you need to change your brake discs?

• when braking, it began to “beat” the steering wheel, a rattle is heard;
• braking distance increased;
• cracks, deep scratches, deformation appeared on the brake discs;
• a shoulder (protrusion) was formed along the edge of the disk.

If at least 1-2 points converge, it's time to change the disks.

Choosing the best brake discs is a difficult task. There are many offers on the market and discs differ from each other technical specifications which are difficult to determine visually. We have broken the task down into 5 easy steps. If you are too lazy to read, just call us - we will select the best discs for you.

How to decide on brake discs:

	Check the rim specifications for your vehicle. Look in the service book - it contains Technical information from the manufacturer: required disk diameter; minimum disc thickness; recommended wheel type for front and rear axles. If this information is not in the book, the original program and vin number will help.
	Choose the right type of discs for the front and rear axles. When choosing, you need to focus on the parameters recommended by the car manufacturer, as well as take into account your driving style: drum discs: the most simple, inexpensive and durable, mounted on the rear axle of most budget models; ventilated discs: the most common disc option; perforated discs: suitable for active (sporty) driving style thanks to rapid cooling technology. Disadvantages - high cost and fragility.
	Decide on the manufacturer (brand). About original discs are 2-4 times more expensive than analogues. At the same time, no automaker in the world produces brake discs. He orders them from the same third-party manufacturers. Therefore, in 99% of cases it makes sense to purchase an analogue. To make it easier for you to navigate, we have compiled a rating the best manufacturers brake discs in 3 price categories. All companies included in the rating are leaders in the development of brake systems.
	Check brake discs before buying. How to distinguish the original from a fake: discs are carefully packed and protected from moisture; on the end of the disc or on any other part of it that is not involved in braking, a similar article is knocked out of the box; no cracks and chips; there are no large age spots (spots up to 3 cm are normal and acceptable); no rust (small rust in the form of inclusions up to 5 mm is acceptable and will be erased during the first braking).
	Try your new brake discs in action. Enjoy! There is also an easier option for selecting wheels: just give us a call and we will find the best option for your car.

choose brake discs choose brake pads

• We do not recommend "saving" and grinding old discs:
  • often the quality of the groove leaves much to be desired;
  • the groove is permissible only on discs without cracks and deformation, as well as with a certain remaining thickness;
  • the cost of turning is on average 50% of the cost of new discs. The worn discs will last for a short time, while the new ones will last much longer;
• In order not to become a “happy” owner of a fake, purchase discs only from official representatives or in trusted stores that issue a quality certificate when ordering (on request);
• Simultaneously with new brake discs be sure to change the pads. The use of old ones is strictly prohibited, since the pads are also subject to deformation and can easily ruin your new brake discs.

Rating of the best manufacturers of brake discs

BUDGET PRICE SEGMENT