A washing machine is a type of household appliance that is in great demand, and also performs main function, very important for every family - washing clothes. There is an incredible number of washing machines that differ in model, type, design, power, drum volume and other parameters, but sometimes even the highest quality products can lose their proper appearance and, for example, stop wringing.

To find out why the machine is not spinning clothes, you will need to conduct a preliminary check that will allow you to: detect the problem, identify the causes and fix the problem at an early stage of development. Most often, initially you need to pay attention to how exactly the washer is set, whether the level of evenness is maintained, which leads to loosening of the rear bolts on the drum and the spin cycle does not work properly.

You also need to check the moment:

1. Proper operation of the drain and the absence of blockage in the hoses and the filter on it.
2. Whether the button that sets the operation for the delicate spin is pressed.
3. Whether the mode button is pressed without spinning, which is most often selected specifically for woolen items.
4. No overloading of the drum with linen, as this affects the rotation speed and, accordingly, reduces the spin efficiency. In special cases, the drum may fail altogether.

The washing machine does not spin even if the laundry in the drum is not balanced, which excludes the uniform distribution of things in a circle and, accordingly, such consequences as vibration, shaking, and even a decrease in the efficiency of wringing out occur. It is not advisable to use a powder, bleach or rinse that is not intended for a particular type of thing, since mismatching labels again can lead to incorrect spinning. It is worth noting that in some cases the extraction of delicate items, in particular curtains, blouses and similar products, requires placing them in a special grid, otherwise the extraction will not give the desired result.

Reasons: LG washing machine does not wring out

If the machine has stopped spinning, then regardless of the type and model of the LG device, service is required, during which the master will be able to determine the cause of the breakdown and possibly eliminate it. If the drain pump breaks down, the pump burns out and this leads to incorrect operation of the spin mode, since the laundry does not drain. If the functioning of the water level sensor or the pressure switch is disturbed, then no signal is sent to the water level control module and the spin cycle does not turn on.

If the operation of the electronic module or programmer in the electromechanical machine is disrupted, then, accordingly, the command is not transmitted to the part responsible for spinning the device.

In some cases, the drum engine may break, which excludes the movement in whole or in part. This may be due to worn graphite brushes. Experts believe that the washing machine will work properly for a long time with timely and competent maintenance, which is best entrusted to a specialist of the highest category. To wash the drum cavity, it is strictly forbidden to use products in which abrasive substances are added, as they can not only scratch the coating, but also cause clogging of the drain holes. To protect the electronic module or semi-automatic device from a voltage drop in the electricity network and to avoid disruption in functional operation, it is required to install special network filters.

What to do: the washing machine has stopped spinning

What should I do if the washer motor does not work and the laundry does not spin?

Need to:

• Stop operation;
• Call the master;
• Test after repair.

In particularly critical cases, the engine may fail. In order to carry out its repair, you need to completely disassemble the entire body, and if the maintenance is carried out independently, then it is advisable to photograph each action. This will help to carry out the assembly at the end of the work correctly and without violations.

After the motor is removed, you need to check the brushes for wear, for which you need to measure their length. If it reaches 0.5 cm, then they require replacement. Next, you need to inspect the engine for water leaking from it through cracks. If there is no experience in repair work, then it is advisable to entrust the process to a specialist, since he will not only help, but also provide a guarantee of quality.

Solution to the problem: the washer does not wring out

Washing machines Samsung, Bosch and similar models may not wring out for a number of specific reasons that require certain actions.

Namely:

1. If washing machine exceeds the operating time according to the regime and does not spin, then you need to check the water level in it, as well as the presence of pressure in the pipes.
2. If, after draining, the engine starts to hum and there is no spin, then service is needed.
3. If, during the spin cycle, the drum gradually stops and is accompanied by dull knocks, then you need to check the level of the machine, as well as the balancing of the laundry.
4. Linen can be poorly wrung out if there are a lot of synthetic things. It is desirable to wash them in small quantities and with the addition of cotton linens.
5. If any mode does not spin, then again service is required to replace the internal components.
6. The washing machine does not spin in the winter. This is most often the problem of private houses, since the drain may freeze.

If the washing machine does not squeeze out, then the mechanical control module may have broken. In other words, in those washers that have mechanical handles to select a specific mode, strict adherence to the instructions and waiting time between each subsequent action is required. If everything is carried out as correctly as possible and at the same time there is a problem with spinning, then it is quite possible that a serious breakdown has occurred inside. Most often, this is wear or loose fasteners, as well as a failure of the tachometer. In this case, the drum does not spin and the laundry is not wrung out.

Experts recommend replacing the drain pump, which will prevent problems with spinning, as well as other serious consequences that can lead to serious investments and possibly the purchase of new equipment. On average, the pump is changed every 5 years. The life of the pump may vary depending on the model of the washing machine, as well as its technical characteristics.

Why the washing machine does not wring out: reasons (video)

A washing machine is a household appliance that cannot be dispensed with either at home or in other premises, since it is used to wash linen, things and other textiles. The spinning process is a very important component of the operation of such equipment, and therefore if it fails, then you can’t simply not wring it out and do this process manually, as this will be the beginning of a breakdown of the entire apparatus.

During operation, even the highest quality household appliances begin to malfunction. Such an assistant in the house as a washing machine copes with the dirty linen of the whole family in a short time. The slightest malfunctions in her work can spoil the mood and add work. One of the most common faults is that the machine does not spin. Why the washing machine does not wring out clothes, the reasons and how to fix them?

Washing machine stopped spinning

Thanks to the spin function, the washed laundry can be taken out of the washing machine in a semi-dry state. It happens that the wash for some reason ends immediately after rinsing the laundry without spinning. There are clean, but wet things in the drum, from which water may even drip. After the laundry is removed from the drum, water may remain in the drum. Such indicators indicate a machine malfunction if it cannot wring out the washed items.

If a similar problem arises, most housewives resort to the help of a master. Do not immediately rush to call a specialist. You can try to figure out this problem yourself and find out possible cause damage, try to fix it yourself.

There are many reasons why the automatic machine does not cope with the spin function. A malfunction can be the usual scale formed on the surface of the heating elements, wear of spare parts, parts and other technical problems. There are a number of reasons why the washing machine does not wring out, the reasons are not serious:

• drum overload;
• the presence of foreign objects;
• clogged drain;
• incorrect program.

The latter causes do not require the intervention of a specialist, since they can be eliminated on their own. Breakage of parts is often not the reason why the washing machine stopped working in the “spin” cycle. Consider some of the most important reasons that you can deal with yourself and which only the master can do.

Wrong program

There are models of washing machines in which not all programs provide for the spin function. At the end of each rinse, the machine simply dumps the water and does not wring things out. For example, in the “Delicate Wash” program, this function is not provided.

Necessary carefully read the instruction manual household appliance and see if there is a spin in the selected program or not.

Overloading the drum with laundry

For narrow models of washing machines, this problem is very relevant. In programs with high turnover, an imbalance occurs if the machine is full of laundry. The control module decides to end the wash without spinning. During the washing process, all the linen gets knocked into one lump, and the tank is also overloaded and the equipment stops working.

These problems often occur in models Indesite, with a width of 33-35 cm. They are very popular with most buyers for their dimensions, as they save space.

Laundry is unevenly distributed in the drum

There are models of machines that do not provide a function to determine the imbalance. In this case, if there is a lot of laundry, and things are bulky, they cannot be evenly distributed in the drum. The technique tries to spin the drum, but all in vain. After several attempts, it cannot work. As a result, if washing stops, the laundry remains wet. Linen is unevenly distributed in narrow models of washing machines.

In this case, you need to get some of the laundry, unload the machine a little and turn on the spin cycle. She will be able to distribute it and squeeze it well. If things were loaded according to the program, and the “spin” cycle did not work, then the components failed.

The presence of foreign objects

In the process of washing from linen, various small objects, for example, fibers, rubbish from pockets, get into the filter of the machine. The worst thing is when other objects can get into it - a toothpick, a bone from a bra. All these items regularly end up in the washer along with things. In a special container of the machine, you can find many different items some time after operation.

To get the garbage, you need to remove the plug from the filter located at the bottom of the front panel. It is protected by a plastic overlay and secured with latches. It should be noted that when opening, a little water flows out of there, so you should put something on it. In this part, all the garbage accumulates, which is easily removed. All parts are put in place and after that you can turn on the machine. It is recommended to do filter maintenance regularly. to avoid problems in the operation of the household appliance.

Drain pump not working

If there is a malfunction in the drain pump, the machine will not be able to work normally and drain the water. For this reason, it will remain in the drum and will not go down the drain. The rinse cycle will not be able to start the electronic module at the desired speed. The performance of the household appliance can only be restored with drain pump replacement.

It is easy to determine the problem, and if the matter is in the drain pump, then at the end of the washing and rinsing cycle, an extraneous sound appears - the machine tries to drain the water and starts champing, but not squeezing. Spinning will not start, so you need to replace the drain pump and everything will work again. It is recommended to change the drain pump every 5 years, as it is constantly wet from the presence of water in it.

Serious breakdowns

There are several serious breakdowns due to which the laundry does not spin in the washing machine. In this case, the help of a specialist is required. These breakdowns include:

• pressure switch malfunction;
• failure of the electronic module;
• failure of the electric motor;
• tachometer malfunction.

The pressure switch transmits a signal to the electronic module according to the water level in the drum. If such a signal is not received, then the spin function of the machine is not activated, and the laundry remains very damp. The master will be able to establish the cause and replace the pressure switch with a new one.

Failure of the electronic module considered the most costly. In this case, the machine will not work correctly and will not wring out either. According to the masters for LG models, this is the most common reason why the machine does not wring out the laundry.

Almost all modern models of the LG brand are very sensitive to overvoltages in the network due to its complex control device. Usually, specialists replace the board or ask the module again. Often, the electronic module in LG quickly fails if power surges occur in the mains.

Violations in the functionality of the electric motor occur due to wear of graphite brushes or broken winding. The washing machine often does not spin due to a motor malfunction. These two factors affect the power of the engine and an insufficient number of revolutions will not be able to start the “spin” cycle. The drum cannot be accelerated and the laundry remains wet. Having assessed the degree of damage, the master changes the engine completely or partially.

The tachometer is responsible for the number of revolutions of the drum per minute during washing. This problem does not affect the “spin” cycle so much. However, the master, diagnosing the operation of the washer, can establish a malfunction of such a device and it will need to be replaced.

Why did the washing machine stop spinning clothes?

We have looked at the most common reasons why laundry stays wet in the washing machine. Some of them are solved on their own, and more complex ones can only be eliminated with the help of a qualified specialist. It is quite difficult to figure out the device of the unit yourself. In addition to experience in working with such devices, it is also necessary to have the necessary tools.

In order for the washing machine to serve for a long time without failures, you need to monitor its condition and follow simple operating rules. It must not be overloaded with linen or filled with a large amount of detergent, use poor quality products. Before washing, check the pockets of the clothes and load the laundry straight into the machine. It is also recommended to use surge protectors that can protect against voltage surges.

A washing machine is a type of household appliance that is in great demand, and also performs the main function, which is very important for every family - washing clothes. There is an incredible number of washing machines that differ in model, type, design, power, drum volume and other parameters, but sometimes even the highest quality products can lose their proper appearance and, for example, stop wringing.

To find out why the machine is not spinning clothes, you will need to conduct a preliminary check that will allow you to: detect the problem, identify the causes and fix the problem at an early stage of development. Most often, initially you need to pay attention to how exactly the washer is set, whether the level of evenness is maintained, which leads to loosening of the rear bolts on the drum and the spin cycle does not work properly.

You also need to check the moment:

1. Proper operation of the drain and the absence of blockage in the hoses and the filter on it.
2. Whether the button that sets the operation for the delicate spin is pressed.
3. Whether the mode button is pressed without spinning, which is most often selected specifically for woolen items.
4. No overloading of the drum with linen, as this affects the rotation speed and, accordingly, reduces the spin efficiency. In special cases, the drum may fail altogether.

The washing machine does not spin even if the laundry in the drum is not balanced, which excludes the uniform distribution of things in a circle and, accordingly, such consequences as vibration, shaking, and even a decrease in the efficiency of wringing out occur. It is not advisable to use a powder, bleach or rinse that is not intended for a particular type of thing, since mismatching labels again can lead to incorrect spinning. It is worth noting that in some cases the extraction of delicate items, in particular curtains, blouses and similar products, requires placing them in a special grid, otherwise the extraction will not give the desired result.

Reasons: LG washing machine does not wring out

If the machine has stopped spinning, then regardless of the type and model of the LG device, service is required, during which the master will be able to determine the cause of the breakdown and possibly eliminate it. If the drain pump breaks down, the pump burns out and this leads to incorrect operation of the spin mode, since the laundry does not drain. If the functioning of the water level sensor or the pressure switch is disturbed, then no signal is sent to the water level control module and the spin cycle does not turn on.

If the operation of the electronic module or programmer in the electromechanical machine is disrupted, then, accordingly, the command is not transmitted to the part responsible for spinning the device.

In some cases, the drum engine may break, which excludes the movement in whole or in part. This may be due to worn graphite brushes. Experts believe that the washing machine will work properly for a long time with timely and competent maintenance, which is best entrusted to a specialist of the highest category. To wash the drum cavity, it is strictly forbidden to use products in which abrasive substances are added, as they can not only scratch the coating, but also cause clogging of the drain holes. To protect the electronic module or semi-automatic device from a voltage drop in the electricity network and to avoid disruption in functional operation, it is required to install special network filters.

What to do: the washing machine has stopped spinning

What should I do if the washer motor does not work and the laundry does not spin?

Need to:

• Stop operation;
• Call the master;
• Test after repair.

In particularly critical cases, the engine may fail. In order to carry out its repair, you need to completely disassemble the entire body, and if the maintenance is carried out independently, then it is advisable to photograph each action. This will help to carry out the assembly at the end of the work correctly and without violations.

After the motor is removed, you need to check the brushes for wear, for which you need to measure their length. If it reaches 0.5 cm, then they require replacement. Next, you need to inspect the engine for water leaking from it through cracks. If there is no experience in repair work, then it is advisable to entrust the process to a specialist, since he will not only help, but also provide a guarantee of quality.

Solution to the problem: the washer does not wring out

Washing machines Samsung, Bosch and similar models may not wring out for a number of specific reasons that require certain actions.

Namely:

1. If the washing machine exceeds the operating time according to the regime and does not spin, then you need to check the water level in it, as well as the presence of pressure in the pipes.
2. If, after draining, the engine starts to hum and there is no spin, then service is needed.
3. If, during the spin cycle, the drum gradually stops and is accompanied by dull knocks, then you need to check the level of the machine, as well as the balancing of the laundry.
4. Linen can be poorly wrung out if there are a lot of synthetic things. It is desirable to wash them in small quantities and with the addition of cotton linens.
5. If any mode does not spin, then again service is required to replace the internal components.
6. The washing machine does not spin in the winter. This is most often the problem of private houses, since the drain may freeze.

If the washing machine does not squeeze out, then the mechanical control module may have broken. In other words, in those washers that have mechanical handles to select a specific mode, strict adherence to the instructions and waiting time between each subsequent action is required. If everything is carried out as correctly as possible and at the same time there is a problem with spinning, then it is quite possible that a serious breakdown has occurred inside. Most often, this is wear or loose fasteners, as well as a failure of the tachometer. In this case, the drum does not spin and the laundry is not wrung out.

Experts recommend replacing the drain pump, which will prevent problems with spinning, as well as other serious consequences that can lead to serious investments and possibly the purchase of new equipment. On average, the pump is changed every 5 years. The life of the pump may vary depending on the model of the washing machine, as well as its technical characteristics.

Why the washing machine does not wring out: reasons (video)

A washing machine is a household appliance that cannot be dispensed with either at home or in other premises, since it is used to wash linen, things and other textiles. The spinning process is a very important component of the operation of such equipment, and therefore if it fails, then you can’t simply not wring it out and do this process manually, as this will be the beginning of a breakdown of the entire apparatus.

Spinning stopped working in the washing machine - users of automatic machines often turn to household appliance repair shops with such a problem. In fact, the spin can be eaten, but the laundry remains too damp. What are the reasons for such a malfunction, we will tell you and give recommendations on repairing equipment using the Samsung washing machine as an example.

custom reasons

The most common reason that the spin cycle does not work in the washing machine is user inattention and neglect of the rules for operating the equipment. So, for example, choosing the wrong washing mode or not knowing the parameters of the washing mode can lead to the fact that you will get damp or even wet laundry from the drum. In some delicate washing modes, the spinning process is not provided in order not to spoil the delicate fabric.

Sometimes the user, without noticing it, turns off the spin. The problem can be easily solved if you run the spin function after washing.

Serious problems in the operation of the washing machine can be caused by a blockage in the drain filter and pump. And such a blockage occurs mainly due to the fact that people do not pay attention to caring for a home assistant. The filter should be cleaned regularly, thus you will save the machine from possible clogging of the drain system and from stagnant water, which can emit an unpleasant odor. If the machine has stopped spinning, and there is clearly water in the drum, then first check the drain filter.

In the Samsung car, it is located in the lower right corner behind a small door. Next to the filter cover, you will see a hose through which you can drain the remaining water from the drum, and only then unscrew the filter counterclockwise and check it for clogging.

A frequent cause of poor spinning is overload and underload of the drum with linen. Overloading the machine with bulky items not only increases the load on the machine parts, but also the laundry is not wrung out. Do not wash light curtains or several pairs of socks in a machine with a large drum, they may also not be wrung out, causing imbalance.

Part breakage

Samsung washing machine does not wring out what to do? More serious reasons for the lack of spin are technical breakdowns. To find out the reason, you will have to act consistently. It is best to check the details in the following order:

• water pump;
• tachometer;
• engine;
• pressure switch;
• control module.

Why this is so, and not otherwise, is explained very simply. We have determined the procedure for checking the above parts based on their availability. The pump, tachometer and engine can be “obtained” through the bottom of the washing machine, the pressure switch through the top cover, but the control module will have to be removed by partially disassembling the front panel. The easiest way is to start getting to the insides of the washing machine through its bottom, since we will immediately be able to check the pump, the tacho sensor, and the engine. This is what we will do.

1. We turn off the water and turn off the washing machine from the sewerage and water supply.
2. We take out the washing machine from the niche in which it is installed.
3. Take out the powder container.
4. Lay the washer on its side very carefully. Lay it on the left side so that water does not leak onto the electrical parts of the washing machine.
5. We remove the tray. Be careful not to break the leak sensor wire.
6. We remove the plastic clamps that secure the pipe going from the tank to the pump.
7. We remove the pipe to the side, after checking if it is clogged with dirt or foreign objects.
8. We unscrew the screws holding the pump, and remove it.
9. We check the pump for mechanical damage, special attention to the impeller.
10. Using a multimeter, we measure the resistance at the pump contacts, if the drain pump is working, the device will show a three-digit number.

Now it's the turn of the tachometer. This is a small device that looks like a ring with wires sticking out. The tachogenerator stands on the engine, transmitting information about the intensity of rotation of its moving parts to the control module; without it, the washing machine cannot squeeze out the laundry. Disconnect the tachogenerator wires and remove the sensor from the engine. We check the resistance with a multimeter, determining whether the sensor works or not.

Now we disconnect the wires from the engine. This must be done carefully so as not to inadvertently tear off anything. Remove the drive belt from the pulley.

We unscrew the mounting bolts that hold the engine in place. Carefully remove the engine. To begin with, we will pull out and check the brushes, for collector motors this is a fairly common problem. Next, we check the resistance of the winding with a multimeter, and if it turns out that it is broken, there is no point in restoring the engine. No, well, of course you can try to give the engine for rewinding to some master, but this idea will cost you about the cost of a new motor plus waiting. In general, "the game is not worth the candle"!

The next stage of work to test the hypothesis, why the Samsung washing machine does not wring out, pushes us to get to the pressure switch. Because of this sensor, the washing machine cannot spin the laundry, because the control module, having not received data on the water level in the tank, sounds the alarm and freezes even before the spin starts. Where is the pressure switch located on a Samsung washing machine?

This sensor is located in the upper part of the washer body, just under the top cover. Therefore, we need to remove the cover. How best to do this, we have already described in the article, read it and everything will become clear to you.

Under the lid, an unusual detail immediately catches our eye, a plastic washer with a tube - this is the pressure switch. Disconnect the wires from the sensor and remove it. The pressure switch, which is mostly made of plastic, also has an electrical part, which we check with a multimeter. At the same time, you need to blow and clean the pressure switch tube with a toothpick.

Next in line is the control module, but we would not advise you to contact this part. Qualified specialists can quickly and "painlessly" remove and check this element, you this operation seems too complicated. Moreover, during a makeshift check and repair of the control module, you run the risk of harming it even more, so it’s better to leave this idea and contact a specialist - it will come out cheaper.

Troubleshooting

Checking the above details, we will certainly stumble upon the element that caused trouble with the spinning of laundry with a Samsung washing machine. The elimination of these malfunctions is mainly associated with the replacement of damaged parts, but there are exceptions to the rule. In particular, if the impeller of the drain pump is damaged, it is quite possible to change it without changing the entire pump.

If you manage to find a suitable impeller in the store, then you will save $ 10 on repairs, but if you cannot find the impeller, you can always buy a new pump.

In rare cases, it is also possible to "reanimate" a broken pressure switch by replacing its electrical part. Here, again, everything will depend on whether you find a suitable replacement for the electrical part of the pressure switch or not. If a replacement is found, you can save about $ 6, if not, buy and install a new pressure switch.

Summing up, we note that the Samsung washing machine may stop squeezing clothes for a number of reasons. These can be banal user errors or serious breakdowns, but in any case, you will have to look for the cause and it is better not to delay it. Good luck!

Each of us is used to using a washing machine, but it does not always work smoothly. Often, when the drum is working properly, the laundry is not wrung out properly or remains wet at all: the automatic or semi-automatic device ceases to perform the spin function. In the absence of spinning, you can suspect a violation of other functions. But first you need to check the severity of the breakdown before sending the unit for repair. Let's figure out what could be the reasons when the washing machine does not wring out, and what to do in each case.

Before washing, check the drum for the absence of foreign objects in it: nails, coins or other sharp objects.

Before washing clothes with zippers or metal buttons, zip them up and turn them inside out to prevent damage to the drum and other clothes or laundry.

Preliminary check

If the washing machine has been leveled and all transport bolts on the rear wall (on the drum side) have been removed, then check:

• how the water drain works and, if necessary, clean the hose or filter from blockage;
• whether the button that sets the reduced number of revolutions for a delicate spin is accidentally pressed;
• whether the operating mode without spinning is selected when washing woolen or silk linen, in this case it is necessary to switch the mode to spinning;
• the drum is not overloaded with laundry, as this will cause it to rotate more slowly and the laundry will not spin out well. The drum may even fail.

If there is an underload of things in the drum, then they will not be laid out evenly around its circumference and vibration may occur at high drum speeds. The machine automatically reduces speed, so the spin becomes insufficient. To prevent this, one large item is washed with 2-4 small ones.

You should use powders, bleaches and fabric softeners recommended by manufacturers, and avoid overdosing them - this can cause poor spinning. Delicate items are placed in a special mesh during washing and spinning.

General technical reasons

The washing machine requires service repair in the following cases.

Timely care of the unit has a positive effect on the operation of the washing machine: wiping the drum, rubber bands of the drum, removing accumulated debris. Do not use aggressive products when washing the drum: for cleaning mirrors, stoves, etc. To tidy up the powder and conditioner tray, it should be removed, rinsed, dried and reinserted.

In order to protect the electronic module or semi-automatic device from power surges and prevent disruption of functional operation, replacement of control boards, the machine should be provided with special surge protectors.

If the engine is not running

To repair the engine, you will need to disassemble the case. First you need to photograph all the fasteners and wires, then they can be removed. The photo will be needed when the engine is returned to its place and the wires are connected. After removing the motor, the brushes are checked for wear by measuring their length. If they do not reach 0.5 cm, then it is time to replace them. You need to inspect the engine for water leaks on it. If there is no experience in repairing engines or a control module, then only professionals will help.

Special cases: different models

If Samsung does not press

The Samsung washing machine does not wring out for the above reasons and the following:

If you select the boil and dry cycle, it will take longer to wash the laundry.

How to repair spin in LG

To find out the reasons for the lack of spin for LG washing machine models and eliminate them, you must:

Detach the panel at the back of the machine and the cover on top of it. On the cover, unscrew 2 screws on each side and remove the bracket. The cover is shifted back a few centimeters and lifted up. The panel at the back of the unit is slightly bent to release it from the grooves.

Check the 3-phase motor for the integrity of its windings by turning on the multimeter and measuring ohms. The three-pin motor connector must be disconnected. The resistance between the three wires (contacts) is normally 7.5-7.8 ohms.

Check the control module with the simultaneous transfer of the unit to the diagnostic mode, for which they hold down the “Spin speed” mode speed button and the “Soil level” button, then press the power button.

During diagnostics, press the “Start” button once to fix the door, the second time to go to the spin cycle.

At zero readings (at zero speed) and no engine rotation - disconnect the connector from the engine on the back of the machine.

A multimeter measures AC voltage. Normally, it is honey with three contacts - 140-150 volts. No voltage - the control module is faulty.

To replace the module, turn off the power from the unit and unscrew from the pressure switch - 1 screw, remove it and put it aside. Next, remove the power connector and the rest of the connectors, gently opening the latches with a knife and disconnecting them. On the front side, all connectors must be disconnected, on the rear side of the control module, the screw is unscrewed. Now the module is shifted to the right and pulled out. In the reverse order, then install the module in its place.

Why does not press Indesit

The cause of a spin failure at Indesit (Indesit) may be a malfunction of the “spin off” switch, electronic module, tachometer. When using the machine, a banal inattention becomes the cause of poor spinning: they turn on the “No spin” or “Delicate wash” mode, which does not involve spinning clothes or linen.

Again, you should load the drum according to the instructions, without exceeding or reducing the weight of the laundry, and also observe all conditions for the normal operation of the machine. Severe breakdowns, such as a malfunction of the tachometer, water flowing into it and wear, a malfunction of the engine or control module, are best left to a service specialist.

Other models

More often, these units are sold with mechanical control, that is, by turning the mechanical knobs, they select the program you need for washing. If the instructions are strictly observed, and the machine only draws and does not completely drain the water, does not wring out, then serious damage should be looked for. The water level sensor may not work. Therefore, the spinning process does not start. If the mount is worn or loose, the tachometer may fail. At the same time, the drum will not spin and the laundry will not be wrung out.

The programmer (relay or control module) breaks down due to power surges in the network, moisture or factory defects. If the mains voltage is low, the machine will also stop draining water and spinning clothes. In a motor, it is often necessary to change internal parts or windings due to a break.

Often, regardless of the Zanussi model, whether it is Bosch, Kandy or Ardo, pumps of drain units, heating elements for heating water and drive belts that rotate the drum break. The drain pump, as a breakage record holder, should be changed every 5 years, as it is constantly wet with water.. You can increase the service life of the unit by removing water from it during long periods of inactivity, but with daily washing this is inconvenient and unrealistic, since the drain hose must be lowered into a container on the floor or disconnected from the body. More often you need to clean the mesh filter grid from debris and various solid objects.

Watch the video with the case when the Bosh machine did not wring:

In order for the washing machine to serve for a long time, you should follow the instructions for its installation and use, cleanliness inside the drum, powder compartments, drain hose, filter, take care of it appearance, but do not allow water to enter the electrical part of the unit.