Date: 2014-07-30
Dear users, we inform you about what is coming out latest version The following models can be updated - Street Storm STR -9530EX , Street Storm STR -9040EX , Street Storm STR -8800EXT , Street Storm STR -9540EX , Street Storm STR -9520EX , Street Storm STR -8020GPS , Street Storm STR -8020GPS EX , Street Storm STR -9020GPS , Street Storm STR -9020GPS EX , Street Storm STR -9030EX , Street Storm STR -9000EX , Street Storm STR -7040GPS , Street Storm STR -8040EX , Street Storm STR -7030GPS , Street Storm STR -6030GPS , Street Storm STR -7020GPS , Street Storm STR -6020GPS , module, is already available for download.
The new firmware is distinguished by the latest coordinate base of stationary radars.
Radar update process:
The program can be downloaded by registered users in the category of the official web resource. To update, you need to go through the simplest registration (at the top of the screen, the ENTER key), download the update program, unpack the archive and run the Updater _X32 file, after that the detector is connected to the computer, which is equipped with a USB-Mini USB cable, and the detector is entered into the update mode through the setup menu . Then, after the detector is recognized by the computer, the “Update” button is pressed in the program window, then you need to wait for the end. Please note that when connected via USB, the display operates in low brightness mode, this is the norm.
GP-One module update:
AT present version 2 coordinate bases of radars are available to choose from:
1. File STR_GP 1_DB_Updater_ReducedDB, which contains the complete coordinate base of radars, including all types of meters, but except for the Strelka-Model, Strelka complexes and video monitoring modules. This base is recommended for experienced users to use in tandem with models equipped with Strelka radar warning modules with a special signal (models with the EXT or EX index in the name). Thus, the functioning of the detector tandem EX + external module STR-GP One becomes more informative. Also updated software of the device. Now the external module does not disturb with a sound signal while driving at a speed of less than 50 km/h.
2. File STR_GP 1_DB_Updater_FullDB, containing the complete coordinate base of all radars, including all types of meters (Strelka, Cordon, Krechet, Odyssey, Strelka-Model, Avtodoriya, Robot, Avtohuragan, Places, Video control, etc.). Also updated software of the device. Now the STR -GP One external module does not disturb with signals while driving at a speed of less than 50 km / h.
Instructions for updating the module:
1. First, the update file is downloaded for the GP -One module.
2. Installed on the PC after unzipping the files to the Desktop.
3. If Windows 7 or 8 is installed on the computer, then you need to immediately go to the fourth step. When using a computer with Windows XP, you first need to run the dotnetfx35setup.exe program, which installs the necessary drivers.
4. Then the STR-GP is connected to the PC using the included USB cable.
5. After waiting for the computer to detect the plug-in device, the computer automatically detects the module as removable drive and suggests its formatting. You must refuse such an offer by clicking the "Cancel" button.
6. After launching the STR _GP 1_Updater program, the “Connection” button is pressed in the open window.
8. We are waiting for the completion of the update process.
9. The system notifies you of the successful completion of the update.
10. This completes the update, you can close the program and the module is disconnected from the computer.
Note. In order for the update process to complete successfully, you must strictly adhere to the order that is set out in the instructions.
STR-9520EX, STR-9510Plus
STR-9040EX,STR-9040GPS,STR-9030EX,STR-9030GPS
STR-9020GPS,STR-8800EXT,STR-8040GPS,STR-8030GPS
STR-8020GPS,STR-8010GPS,STR-7700GPS,STR-7040GPS
STR-7030GPS,STR-7020GPS,STR-7010GPS,STR-6600GPS
STR-6030GPS,STR-6020GPS,STR-6000GPS
1. In order to update the coordinate base of stationary radars or the detector software, click on the "Download" button and download the archive with the program, then unzip it to a location convenient for you on the disk.
2. Install the program on your PC by placing it on your desktop.
3. Connect your radar detector to your PC with the included USB cable.
3.1 Enter the device into update mode (to do this, press the DIM + MUTE + CITY keys simultaneously and hold for at least 2 seconds.) After the UPDATE scrolling line appears on the display, your computer will detect the device.
4. Run the Updater_x32 program. Select the section you want to update by checking the box (detector software, or GPS database, or both software and database) and click the "Update" button.
5. Wait for the update process to finish.
6. After the update is successfully completed, close the program and turn off the radar detector.
Version: 04.15
zip (2.2 Mb)
STR-9540EX, STR-9530EX
Attention owners of STR-9530EX and STR-9540EX models! For your models in the current update, changes have been made to the software and new functions have been added: a new notification algorithm for the Avtodoria meter, as well as a new interference filtering mode "City3". For these functions to work correctly, the following conditions must be met:
- For each of the STR-9530EX and STR-9540EX devices, you need to download the software version that corresponds to its serial number. The range of serial numbers is indicated next to the respective download key. Before downloading, please make sure that the serial number of your device falls within the indicated range.
- For the correct operation of the City3 mode after the update, you must visit the service center at Moscow, st. Alabyana, d. 12, building 1 for additional revision (the cost of the procedure is 470 rubles).
Attention! For those who became the owner of the STR-9540EX quite recently and who had the City3 mode in the factory equipment, visit the service center for revision no need!
STR-9540EX |
|||||||||||||||||||||||||||||
Serial number | Update Program |
||||||||||||||||||||||||||||
KM13110400001 - KM13110402020 | Version: 04.15
|
||||||||||||||||||||||||||||
KM13110705556 - KM13110707070 | Version: 04.15
|
||||||||||||||||||||||||||||
KM13110810606 - KM13110811605 KM13110812606 - KM13110812615 KM13110811606 - KM13110812565 KM13110812566 - KM13110812605 KM13110812616 - KM13110812625 KM13111015454 - KM13111015853 KM13111015854 - KM13111017453 KM13111017454 - KM13111017473 KM13111209596 - KM13111210595 KM13111211596 - KM13111211605 KM13111210596 - KM13111211595 KM13111211606 - KM13111211615 |
By creating Street Storm radar detectors, we strive to protect the driver 100% from a variety of threats. However, unlike in previous years, the situation is constantly changing, so we decided to open this topic in order to inform you about these changes in a timely manner and offer the best ways to solve emerging challenges. Most of our models are built on the most modern, technologically advanced ESP (Extreme Sensitive Platform) and HSP (High Sensitive Platform) platforms. It should be noted that detectors from other manufacturers (even world famous ones) use solutions created 15-20 years ago. Street Storm specialists, who created the ESP and HSP platforms in 2012, tried to include in their developments not only outstanding characteristics for detecting microwave radio signals from road radars and modern LISD and AMATA laser meters, but also the possibility of potential improvement in the future with the emergence of new threats . Sometimes this requires updating the detector software, which can be done on all models based on the HSP or ESP platform (via a service or full-featured USB port). In some cases, minor hardware modifications are required. In any case, the specialists of the Moscow service center and regional partner services are happy to help the owners of branded Street Storm radar detectors. If you have difficulty obtaining local service support, you can send the product directly to the Moscow SC at: Qualitech service company So, what are the options for updating and retrofitting Street Storm radar detectors now?Street detectors Storm on the HSP platform appeared on the market in April 2012 and immediately marked a new standard for sensitivity in the K-band. A striking proof of the high sensitivity of our technology was the detection of the most insidious at that time, invisible to Strelka's competitors. An impulse radar complex operating in the K band was detected from a distance of 150-250 meters. Despite the fact that the degree of protection against Strelka at such a distance is minimal, in relation to all other road radars operating in the K band, the detection range has increased quite noticeably. The next milestone was May 2012, when a new product was introduced to the market - a radar detector with an integrated GPS module STR-9510. Having a pre-installed coordinate base on board with the possibility of self-updating at home, the detector already then notified about the Strelka radar from 600 meters with a special message RADAR STRELKA on the display and a countdown of the distance as it approached the speed control point.
In an effort to maintain protection at the highest possible level, since July 2014, our company has been offering almost all detector models only with an external or internal GPS module. If the internal GPS receiver is installed at the factory during assembly, then external module STR
-
GP One can be retrofitted to any model based on the HSP or ESP platform. The cost of retrofitting in the service is 1500 rubles. This amount includes the cost of the module, as well as the refinement of the detector. To date, this service is available only in the Moscow SC. They are also ready to upgrade for regional customers when sending the detector by Russian Post; since the device is compact, the cost of shipping to Moscow rarely exceeds 100 rubles, and we cover the costs of sending it back. |
External Bluetooth+GPS module STR-GP One BT External GPS module for Street Storm radar detectors with Bluetooth. Preset coordinate base of stationary radars (Strelka-ST, Strelka-Video, Robot, Cordon, Avtohuragan, Krechet, Mesta, Avtodoria, etc.), warning distance 600m-1200m Depending on the speed of the vehicle and the type of point, a USB adapter for updating the base is included. To update via smartphone, download the application Street Storm BLE(available on App Store and Google Play)(add highlighted links to stores). The smartphone must support the technology Bluetooth Smart
(other names are Bluetooth 4.0, BLE, Bluetooth Low Energy) for iPhone, all devices have this technology, starting from the 5th version (iPhone 5, 5S, 5C).The cost of retrofitting 1990r. |
|
|
External bluetooth module STR-BT One Since September 2016, it is possible to retrofit the vast majority of detectors with a built-in GPS or GPS + GLONASS module with an external Bluetooth device STR-BT One. This upgrade allows you to get access to a daily updated database of stationary radars and timely update this database without leaving the car via a smartphone based on iOS or Android. Also note that the smartphone must support the Bluetooth 4.0 protocol (BLE, Smart). Any of our previously released GPS models can be retrofitted Besides STR-9510, STR-9950EX GL, STR-9750EX, STR-9550EX, STR-9350EX. The cost of retrofitting, including the cost of the external Bluetooth module STR-BT, will be 1,500 rubles. Please note that for retrofitting, you need to drive to our service center, having a detector with you. |
|
STR-9520EX, STR-9510Plus
STR-9040EX,STR-9040GPS,STR-9030EX,STR-9030GPS
STR-9020GPS,STR-8800EXT,STR-8040GPS,STR-8030GPS
STR-8020GPS,STR-8010GPS,STR-7700GPS,STR-7040GPS
STR-7030GPS,STR-7020GPS,STR-7010GPS,STR-6600GPS
STR-6030GPS,STR-6020GPS,STR-6000GPS
1. In order to update the coordinate base of stationary radars or the detector software, click on the "Download" button and download the archive with the program, then unzip it to a location convenient for you on the disk.
2. Install the program on your PC by placing it on your desktop.
3. Connect your radar detector to your PC with the included USB cable.
3.1 Enter the device into update mode (to do this, press the DIM + MUTE + CITY keys simultaneously and hold for at least 2 seconds.) After the UPDATE scrolling line appears on the display, your computer will detect the device.
4. Run the Updater_x32 program. Select the section you want to update by checking the box (detector software, or GPS database, or both software and database) and click the "Update" button.
5. Wait for the update process to finish.
6. After the update is successfully completed, close the program and turn off the radar detector.
Version: 04.15
zip (2.2 Mb)
STR-9540EX, STR-9530EX
Attention owners of STR-9530EX and STR-9540EX models! For your models in the current update, changes have been made to the software and new functions have been added: a new notification algorithm for the Avtodoria meter, as well as a new interference filtering mode "City3". For these functions to work correctly, the following conditions must be met:
- For each of the STR-9530EX and STR-9540EX devices, you need to download the software version that corresponds to its serial number. The range of serial numbers is indicated next to the respective download key. Before downloading, please make sure that the serial number of your device falls within the indicated range.
- For the correct operation of the City3 mode after the update, you must visit the service center at Moscow, st. Alabyana, d. 12, building 1 for additional revision (the cost of the procedure is 470 rubles).
Attention! For those who became the owner of the STR-9540EX quite recently and who had the City3 mode in the factory equipment, visit the service center for revision no need!
STR-9540EX |
|
Serial number | Update Program |
KM13110400001 - KM13110402020 | Version: 04.15
|
KM13110705556 - KM13110707070 | Version: 04.15
|
KM13110810606 - KM13110811605 KM13110812606 - KM13110812615 KM13110811606 - KM13110812565 KM13110812566 - KM13110812605 KM13110812616 - KM13110812625 KM13111015454 - KM13111015853 KM13111015854 - KM13111017453 KM13111017454 - KM13111017473 KM13111209596 - KM13111210595 KM13111211596 - KM13111211605 KM13111210596 - KM13111211595 KM13111211606 - KM13111211615 |
Upgrading your radar detector. This guide is intended for users of Windows-based computers. STR-9950BT, STR-9750BT,STR-9550BT, STR-9950EX GL,STR-9750EX, STR-9550EX, STR-9350EX2. Before connecting to the computer, press and hold the PRG button on the detector. After connecting, release the button. When updating models STR-9950BT, STR-9750BT, STR-9550BT, instead of the PRG button, press and hold the volume control before connecting to the computer. STR-7010BT, STR-6000BT, STR-9900EX GL,STR-9030EX GL, STR-8040EX GL, STR-8030EX GL,STR-7040EX GL, STR-7030EX GL, STR-6030EX GL,STR-9540EX GL, STR-9540EX, STR-9530EX,STR-9520EX, STR-9510Plus, STR-9040EX GL,STR-9040GPS, STR-9030GPS, STR-9020GPS,STR-8040GPS, STR-8030GPS, STR-8020GPS,STR-8010GPS, STR-7700GPS, STR-7100EXT,STR-7040GPS, STR-7030GPS, STR-7020GPS,STR-7010GPS, STR-6600GPS, STR-6030GPS,STR-6020GPS, STR-6000GPS1. Download the archive with the software, extract all files from the archive and save them on the desktop of the computer.2. Connect the detector to the computer. On all detectors, except for the STR-9540EX GL, press and hold the DIM, MUTE and CITY buttons for a couple of seconds until the word UPDATE appears on the detector display. On the STR-9540EX GL detector, the Update mode is entered by selecting the corresponding item in the Settings Menu. 3. We are waiting for the computer to see the connected equipment and offer to format it. We refuse the offer. 4. Run the program (downloaded file UMSPTUpdater_vX_X_A_.exe, instead of X_X - Current version), in the program window, click the Update button. 5. At the end of the process, close the program, turn off the detector. When connecting the detector in a car, it is recommended to reset it to factory settings (via the menu). STR-GP One, STR-GPS Uni, STR-GP One BTFor your convenience, the ARROW item has been added to the update interface. If you want to download the full database, which includes Strelka complexes, then you need to leave a checkmark in this field. If you use an external GPS in tandem with our detector equipped with a module for determining the Strelka complex with a special signal (models with the EX or EXT index) - you can uncheck the box and the Strelka radars will not be uploaded to the updated database.1. Download the archive with the software, extract all files from the archive and save them on the desktop of the computer. 2. Using the included USB cable, connect the GPS module to the computer. 3. We are waiting for the computer to see the connected equipment and offer to format it. We refuse the offer. 4. Run the program (UMSPTUpdater_vX_X_D.exe, instead of X_X - the current version), in the program window, click the Update button. 5. At the end of the process, close the program, disconnect the module from the computer. STR-9020GPS EX, STR-8020GPS EX, STR-8010GPS EX,STR-7020GPS EX, STR-7010GPS EX, STR-6600GPS EX,STR-6000GPS EX, STR-6020GPS EX1. Download the archive with the software, extract all files from the archive and save them on the desktop of the computer.2. Connect the detector to the computer. Press and hold the DIM, MUTE and CITY buttons for a couple of seconds until the word UPDATE appears on the detector display. 3. We are waiting for the computer to see the connected equipment and offer to format it. We refuse the offer. 4. Run the program (downloaded file UMSPTUpdater_vX_X_E.exe, instead of X_X - the current version), in the program window, click the Update button. 5. At the end of the process, close the program, turn off the detector. When connecting the detector in a car, it is recommended to reset it to factory settings (via the menu). |