Good day, dear habrousers. For a long time I searched on the Internet for how to install root rights on Chinese Android devices, because some of them have been mentioned more than once on the Internet. The search nevertheless led to a successful result.

Below the cut is a description and installation instructions.

VRoot program

The easiest way to install ROOT on Android devices (for some devices today the only way to install ROOT). This version of the program already supports devices running Android 4.3.

*On some devices, to install ROOT, you must first unlock BOOTLOADER.

Installing ROOT

Obtaining ROOT rights:
Any operation is performed at your own peril and risk!

• 1. Download and install the VRoot 1.7.0 program on your computer
• 2. Disable antivirus programs(as needed).
• 3. Launch the VRoot program, connect the turned on device to the computer (if it is not detected, try installing the latest drivers from the official website of your device). The following must be enabled on the device: USB debugging, installation from unknown sources, USB connection MTP and Camera (RTR) must be unchecked; if the program does not automatically detect your device on any of the connection types (for example, “Media synchronization”), then try another type.
• 3. After the device is detected by the program, press the lower right green “ROOT” button and wait.
• 4. After the last program window appears, the device reboots. You can disconnect it from the computer.
• 5. All of you have received ROOT rights. After all this, go to the main menu of the programs of your device and see what has appeared there new program"Superuser" (Chinese). When you first use programs that require Root, a window pops up asking Superuser to grant superuser rights (see screenshots below), you must confirm permission by clicking on the right button (at the end of the inscription on the button there is a “+” sign). In the settings of the Superuser program (bottom column, labeled “ROOT”), programs that have these rights are marked with a green checkmark.

Good day, dear habrousers. For a long time I searched on the Internet for how to install root rights on Chinese Android devices, because some of them have been mentioned more than once on the Internet. The search nevertheless led to a successful result.

Below the cut is a description and installation instructions.

VRoot program

The easiest way to install ROOT on Android devices (for some devices today the only way to install ROOT). This version of the program already supports devices running Android 4.3.

*On some devices, to install ROOT, you must first unlock BOOTLOADER.

Installing ROOT

Obtaining ROOT rights:
Any operation is performed at your own peril and risk!

• 1. Download and install the VRoot 1.7.0 program on your computer
• 2. Disable anti-virus programs (as necessary).
• 3. Launch the VRoot program, connect the turned on device to the computer (if it is not detected, try installing the latest drivers from the official website of your device). The following must be enabled on the device: USB debugging, installation from unknown sources, in the USB connection the MTP and Camera (RTR) checkboxes must be unchecked, if the program does not automatically detect your device on any of the connection types (for example, “Synchronization” carriers"), then try a different type.
• 3. After the device is detected by the program, press the lower right green “ROOT” button and wait.
• 4. After the last program window appears, the device reboots. You can disconnect it from the computer.
• 5. All of you have received ROOT rights. After all this, go to the main menu of the programs on your device and see that a new program “Superuser” (Chinese) has appeared there. When you first use programs that require Root, a window pops up asking Superuser to grant superuser rights (see screenshots below), you must confirm permission by clicking on the right button (at the end of the inscription on the button there is a “+” sign). In the settings of the Superuser program (bottom column, labeled “ROOT”), programs that have these rights are marked with a green checkmark.

Many of those apps that actually modify or enhance an Android device require root access. But on the factory firmware the superuser is blocked. This is done to ensure that the user does not cause unintentional harm to his device. But what to do if you need root, but you don’t know how to get it? Now we'll tell you.

Warning:

• You and only YOU are responsible for all actions performed with the device. The editors do not undertake any obligations on this issue.
• Don't forget to do backup copy all important user information. If the root procedure fails, it will be deleted because The device will need firmware.
• The root procedure voids the warranty! Make sure your device is out of warranty.

Today, many manufacturers of smartphones and tablets choose relatively inexpensive and quite quality processors Chinese company MediaTeck. Mainly the MTK65XX series is used. The methods for obtaining root described in this article were tested on devices with these chips. Perhaps they will work on devices with other processors, but checking this statement is a personal matter for everyone.

Preparation

The first thing you need is a smartphone or tablet charged at least 50%. Android based. Transfer all the necessary data from it to your computer, install the appropriate drivers. Find a whole USB cable, best of all, included with the device. Connect it to the REAR port of the PC or any port of the laptop. It is not advisable to use the USB 3.0 interface.

Enable USB debugging on your device (for developers, USB debugging).

If there is no “for developers” item in the settings, go to “version information” and find the build number. You will need to click on it 7 times. Then the corresponding column will appear in the settings.

Allow applications to be downloaded from unknown sources. To do this, go to “settings” - “security” - “unknown sources” (check the box).

If you did everything correctly, the preparation is complete.

Getting root using universal application Kingo Root.

Download and install the Kingo Root application on your PC. Latest version always available on the official website. By the way, this program allows you to get root also on many Samsung devices based on Snapdragon.

Launch it and connect your Android device.

The program will detect your smartphone or tablet. If you forgot to enable USB debugging, Kingo Root will show you how to do it.

When everything is ready to go, press the ROOT button and wait.

If everything went well, a window like this should appear.

Now you can go to the programs on the device and check for root.

If you want to remove root, connect your phone to your PC, launch Kingo Root and press the UNROOT button. The program will remove superuser rights from the device.

Rooting using the vRoot application from the Middle Kingdom.

Download, install and run the program.

She will immediately pick up the device and begin to analyze something.

Press the ROOT button.

Wait until this screensaver appears.

You can turn off your phone and check your root rights.

Route using the universal utility MTKdroidTools.

Download the archive with the program and unpack it to any convenient location.

Then open MTKdroidTools.exe

The program will determine the phone model and its specifications. Press the ROOT button.

When such a message appears, we try to use other methods of obtaining root, because the problem cannot be solved easily. Or, you can follow the link provided by MTKdroidTools and read all the details on a specialized forum for Chinese phones.

But if everything went well, and the yellow square opposite the ROOT key turns green, go to the program tab “root, backup, recovery” and perform the actions in the sequence indicated in the screenshot.

Afterwards the device should reboot. Root received!

If you still have questions, ask them in the comments. We will try to help everyone.

When following these instructions, neither the author of the articles nor the site administration bears responsibility. Responsibility for any breakdowns, risks, “your” mistakes made while following the instructions, as well as possible consequences of using information and/or materials, rests entirely with the “person performing these instructions”!

When following these instructions, complete or partial loss of personal data and content is possible. No material demands can be made on your part, either to the Site or to the author of the Articles! Any subsequent repair of the device, or full/partial replacement will be made only at your expense! The author of the articles and the Site Administration do not guarantee that when following these instructions, a 100% result will be achieved. The user is obliged to familiarize himself with the instructions used by the Author of the articles and the Site Administration in order to avoid mistakes when following any instructions.

Responsibility for the quality of the used software and the risks associated with its operation are borne by its developer.

The User confirms that he has read all the clauses of this Agreement and unconditionally accepts them.