The universal remote control for the car radio on the steering wheel will help you safely control it on the road and not be distracted from driving. There are several ways to connect this useful device.

Advantages and disadvantages of the remote control on the steering wheel

The main advantage is an increase in the convenience of controlling the head unit. You can perform various operations with the radio without removing your hands from the steering wheel. You can place buttons on it that are responsible for accessing frequently used car radio functions, such as volume control, tuning radio stations and switching music tracks.

If there is no place to place buttons on the steering wheel, the steering column joystick for radio control can solve this problem. It offers the same ease of use, and the connection to the radio is more reliable thanks to the direct connection. Unlike a joystick, a steering wheel with a remote control is connected using slip rings or a harness that has a limited life due to constant bending or friction. This is the only drawback of such an accessory.

Choosing an adapter and remote control

The steering wheel remote control for the car radio must be compatible with it and fit in shape and size to the standard steering wheel. There are 2 ways to connect these devices:

• Through a special minijack socket for remote control. This method is used on Pioneer head units and some others.
• via CAN bus. This method can be used to connect a steering wheel button adapter to control an aftermarket radio.

The adapter, which coordinates the commands and provides support for steering wheel controls, must be programmed to work with the installed car radio. Otherwise, some buttons may not work properly or not work at all. To expand the functionality of the multifunction steering wheel, you should choose an adapter that allows you to program several actions on one key (by pressing and holding, as well as multiple pressing).

Instruction

Connection and installation of the steering remote control of the radio can be carried out at home. First you need to disable battery. Then the regular steering wheel is removed and head device. The further procedure depends on the installation and connection method.

How to install

To install the radio remote control on the steering wheel, you will need to remove the lining and the horn button from it. In their place, universal buttons with an adapter are installed and fixed. If a harness is used for connection, then it is fixed to the steering wheel and its column with clamps. The steering column switch can be installed on the casing next to the ignition switch and the wiper lever. All wires are routed under dashboard, and the radio tape recorder is installed in its place.

How to connect

If the remote control for the radio is connected to the steering wheel via a minijack, then the plug should be inserted into the remote control socket. Power is supplied to the multifunction steering wheel module from the blue wire with a white stripe from the car radio. To connect the buttons on the steering wheel to the head unit via the CAN bus, insert the plug into the appropriate connector. The car radio and ignition are then turned on to activate the communication of the two devices.

Also, the connection can be made through the ISO connector, since some manufacturers provide unused contacts in such a connector, to which an adapter is connected for car radio with steering wheel control. After connecting the control device, it should be checked for operability.

How to use

If the radio stalk switch or multifunction steering wheel is configured, then the keys on them should perform the same functions as on the front panel. Otherwise, you will need to learn the buttons on the steering wheel. In most cases, this is done using the universal remote control included with the car radio. To switch to the learning mode, the adapter wire responsible for this function is connected to ground or a positive pole. After that, the corresponding LED should light up. If there is a buzzer, it will emit a confirmation tone.

Then you should press and hold for a few seconds the radio control button on the steering wheel, to which you want to assign a function, for example, increase the volume. The assignment mode indicator lights up. After that, you should press a similar key on the manual control panel of the head unit. The assignment LED should turn off. The buzzer will sound a different tone.

The rest of the buttons on the multifunction steering wheel are programmed in the same way. After completing the setting, you must de-energize the terminal responsible for this mode in order to start using the steering control unit. It should be borne in mind that the connection process for working with Chinese radio tape recorders may differ.

We present a selection dedicated to music in the car. While traveling, you want to listen to good music, but you often have to switch it, flipping through the playlist.

Car manufacturers are trying to stuff vehicles with the smartest electronics. So, for example, put head unit, manage which can also on the steering wheel, where the toggle buttons are embedded. But there are also cars in which they listen to music in the old fashioned way, clicking the "tape recorder".

Car owners have to buy a special gadget on their own - car radio remote control. These incredibly useful devices will be discussed in our new "five" from Aliexpress.

Customer Feedback:

Review #1: The parcel came by sdek. Went a month to the Tomsk region. Remote working, set up all the buttons the first time. I didn’t check the range, but I get a signal from the steering wheel. Mystery cassette recorder, I recommend!!!

Feedback #2: Everything is working. I just had to turn it over so the tape recorder could see it.

Review #3: The remote control came within two weeks, packed well, everything works, thank you. Recommend.

Reliability of the seller: excellent!

Delivery in Russia: free!

Customer Feedback:

Review #1: The parcel went 22 days to Dmitrov near Moscow. All as in the description. Connected to android radio. Everything works perfectly.

Feedback #2: Figured out how to connect. Everything works perfectly. Thank you. I advise.

Review #3: Everything is working. No complaints.

Reliability of the seller: excellent!

The steering column radio joystick is a very useful device, which, as far as possible, should be in every car. What is its essence, as well as how to choose the right model and install it - below.

Pioneer DEH-X5900BT

[ Hide ]

The purpose of the remote control on the steering wheel

The remote control for the steering wheel for the car radio is therefore highly valued because the driver is not distracted from the road while driving. Therefore, the risk of getting into an accident is greatly reduced. Now the driver does not need to turn his head around - the radio control buttons are on the steering wheel. Thus, you can quickly switch the song or other options that the device includes.

It should be borne in mind that the remote control is installed on the steering wheel, and therefore the system control and various commands are sent to the device via a radio channel.

Selection Options

Choosing from models of various car radios is another task. Especially considering that each of them has both minuses and pluses. You also need to take into account the price, because this “toy” costs a lot of money.
When buying a device, you should take a closer look at the interesting model Varta V-DV05D. Considering that the radio standard is 1 DIN, it allows the car driver and passengers to enjoy high-quality sound and convenient control, because the remote control is installed on the steering wheel. The option is convenient because it plays all popular formats, including discs, and also has an AC3 audio codec. output power this device 4x50 W.

The Pioneer DEH-1600UB car radio has an affordable price and 1 DIN standard. Unlike the previous model, here it is possible to read information from a USB-drive, smartphone or player, thanks to the AUX / USB connectors. The model has a monochrome screen, which receives information about the composition. A significant plus is that the car radio has original sound effects that turn music into a single unit in a DJ set.

Pioneer DEH-1600UB

Given that this model has a graphic equalizer, setting the desired sound quality is not difficult. Another plus is the ability to connect a wired remote control for the car radio. For this there is a special connector. The Pioneer DEH-P3600MR model allows you to mount the steering column switch of the radio, which is quite convenient, because it eliminates the loss of the universal remote control.

Alpine CDE-180R. This device, like the previous one, has a 1 DIN standard. Supports iPhone and iPad connection functions. In addition, it has the ability to play music from discs and other media. The variant of this radio has, like the previous ones, a removable panel, which will protect the device from unnecessary attention of robbers. The kit includes a remote control for the steering wheel for the car radio (the author of the video is Avtozvuk.ua).

The JVC KD-R90BTEY car radio has a higher price compared to previous models. It is very convenient to manage this device, taking into account the fact that the bluetooth module, which allows you to activate the "hands-free riding" function. This option supports many popular formats, support for CD and MP3 discs. As in previous gadgets, there is an amplifier and a graphic equalizer.

JVC KD-R90BT

Alpine CDE-W235BT has a 2 DIN standard. The car radio is more expensive than previous models. It has a 2-line display, several button illumination options that can be customized to match the dashboard. Connection to the device is carried out via USB, as well as through an audio output through which you can connect an MP3 player, iPad and smartphone. The system has a digital radio tuner with the ability to auto search for stations, and a 3-band equalizer. The car radio comes with a universal steering wheel remote control.

The Phantom DV-100 is a good option. The gadget received the 2 DIN standard, has an average price, and also good system navigation. The device is able to support various music and video formats, including jpeg format, as well as play CD, DVD and MP3 discs. Supports various color formats, as well as FM, SW and RDS formats. Among other things, this radio goes to operating system Windows.
All of the options listed above can be installed on your own car.

Instructions for installing a joystick on the steering wheel with your own hands

1. Remove steering wheel cover.
2. Make a small hole on the inside of the steering column according to the stamping in order to install the joystick.
3. Now you need to prepare the wiring from the head unit connector to the joystick.
4. Tape the connector with insulating tape to the contacts near the place of installation of the part.
5. Throw the wires through the hole and assemble the steering column casing structure.
6. The joystick falls into place and is fixed with latches.

Music in the car is a great addition to the comfort and good mood while driving. A wide variety of radio tape recorders in the automotive market, standard installation and non-standard, allows the consumer to choose equipment according to individual taste and for a particular company and brand of car.

Push button auto audio control

While driving, it is not always convenient to use the push-button radio to search for a specific audio recording, radio waves and to adjust the volume. It is safer to use the standard radio control buttons on the steering wheel. This function is installed in car dealerships as an additional one or as part of a premium kit for new vehicles. The regular devices of a middle-class car (for example, the Chevrolet Lacetti) have little capability.

Sometimes car owners prefer to replace the standard audio system with a new multifunctional one. Then the signal from the buttons on the steering wheel does not enter the installed radio, and the driver has to contact the installation center.

To create a relationship between auto control and audio equipment, a steering controller is used, which changes the signal from the button on the steering wheel into a signal for reading by the radio. To connect it, the car has all the necessary wiring. Steering adapters fit almost all radios that have an infrared port and / or a mini-jack output.

Modules for the multifunction steering wheel:

1. Resistive. In the memory of the module, the indicators of the measured resistance are recorded, as a result of which the control of the steering buttons over the radio tape recorder occurs.
2. Supporting CAN-buses. This adapter modifies only digital signals exactly to those that are received by the installed non-standard audio system.

Independent connection of the multifunction steering wheel

The service of connecting the radio control on the steering wheel in car centers requires certain financial costs and the involvement of experienced specialists with knowledge in the field of auto electrics.

But you can connect the remote control and buttons on the steering wheel yourself with your own hands. So how to connect the steering wheel control to the radio?

Consider the algorithm for reinstalling the radio control on the steering wheel when buying a new radio using the example of a Chevrolet Lacetti car. The work will take 1-1.5 hours with all the steps.

Instructions for reinstalling the standard remote control

1. The remote control of the radio on the steering wheel is removed by removing the bolts.
2. The connector is removed from it.
3. The remote control is disassembled by unscrewing three screws.
4. Resistors of certain ratings are soldered on the control board using a soldering iron.
5. Ribs are cut in the cover of the remote control, and we assemble it back.
6. One wire from the mini-jack is soldered into the central input, the second - into the side. The wires are insulated with electrical tape.
7. In the car, the connector from the radio is cut, stripped, connected to the mini-jack on the terminals and insulated as well.
8. The mini-jack is connected to the radio through a connector in the rear wall of the equipment case.
9. The connector is inserted into the console, which is then put back by screwing with two bolts.
10. We turn on the radio and check the results, whether the radio control on the steering wheel works.

Instructions for installing the remote control on the steering wheel with a compatible car radio

1. The glove compartment is removed.
2. The heater wires are disconnected.
3. The beard is removed on the panel.
4. The radio tape recorder is taken out, from which three wires depart - black, brown-yellow and brown-orange.
5. In the connector from the radio in the left corner (yellow-green chip) there are two wires from the control panel on the steering wheel.
6. Two wires from the remote control and black and brown-yellow wires from the radio are connected.
7. The radio, beard and glove compartment are put in place.

Installation and connection instructions for Chevrolet steering wheel control

1. A control panel with a mount is purchased, a steering wheel contact group with the ability to connect the remote control itself.
2. Removing the steering wheel:

• On the right side of the steering wheel, the plug of the hole for the screws intended for attaching the airbag module is removed;
• The screws for fixing the block are unscrewed;
• The connector is disconnected from the block and removed;
• Two screws securing the airbag module are unscrewed;
• The module is removed;
• The pad holder opens;
• Disconnect the connector and remove the airbag module;
• The connector is disconnected from the audio signal;
• The key loosens the steering wheel nut, then completely unscrews;
• The steering wheel is removed.

1. The steering group is installed or replaced.
2. The airbag is removed.
3. In the extended group of the steering wheel, three wires are installed - for the signal and two for the radio control panel.
4. Wires are connected from the steering group with wires from the radio (there are also three of them).
5. The remote control, airbag and steering wheel are put in place.
6. Installation and programming of the car radio control adapter on the steering wheel:

• The central panel (beard) is removed;
• The radio tape recorder is taken out;
• The black wire from the yellow-green steering chip is connected to the black wire of the adapter;
• The blue wire of the yellow-green chip with the green wire from the control module (not the blue one);
• The red wire of the adapter is connected to the red power wire from the radio;
• To connect to the audio system, a mini-jack or an infrared port is used;
• The adapter is fixed with clamps under the radio;

1. Check the operation of the buttons on the steering wheel.
2. The radio is installed, the panel is assembled.
3. Check programming and connection.

Following all the points of the algorithm, each motorist with his own hands will be able to install the control panel on the steering wheel, reinstall it in connection with the purchase of a compatible audio system, and also install and connect the radio control on the steering wheel. Thus, the driver will save money and some time.

Outcome

The audio control panel on the steering wheel - the comfort and confidence of the car owner at high speeds, while talking on the phone, in poor visible weather conditions. This is a necessary, and sometimes indispensable addition to the functionality of the car.

A standard car radio or car multimedia system is equipment for reproducing audio and video information (depending on the class of equipment), which is installed at the car factory at the time the car is equipped with equipment and car accessories.

car audio head unit

Devices for this purpose have four control options.

1. Control from the remote control (DU).
2. Button control. The buttons are located at the bottom of the front panel of the radio.
3. Touch control of functions and options with one touch to the characters on the LCD screen, if available.
4. Push-button control from the steering column or directly from the steering wheel of the car.

It is the fourth option that we will consider in detail in our article.

Nissan X-trail, BMW E46 and Pioneer aftermarket radio will be used as examples.

Radio with steering wheel buttons

Almost all modern turntables can be controlled by buttons on the steering wheel. But the most popular among motorists are devices from Pioneer and Sony. This type The device can be controlled in two ways (we do not take into account the remote control mounted on the steering wheel in a special clip):

• Through the buttons already on the steering wheel (multi-steering wheel).
• A separately purchased and built-in button block for remote control of the Pioneer non-standard radio tape recorder.

The second option for connecting the radio control on the steering wheel is much more difficult, since its implementation will require not only the installation and adaptation of the alternative head unit itself, but also the almost complete disassembly of the car's steering column.

Many models of passenger cars already have the so-called multifunction steering wheel in their standard configuration. But in this case, the work of connecting the player to the control buttons will not be easy. Although manufacturers promise that all installation steps will take no more than half an hour, in reality this process takes several hours. It all depends on the level of knowledge and skills of the installer. Therefore, we recommend, in their absence, to contact professional craftsmen from a specialized center for the installation and repair of car audio. Otherwise, if you connect it incorrectly, you risk not only losing the Pioneer radio, but also disrupting the control system and other equipment.

Connecting the Pioneer radio to the steering wheel of a Nissan X-trail car through standard buttons

What is needed in order to connect the buttons on the steering wheel to the aftermarket radio?

• The multiwheel itself. On the Nissan X-trail, it is present in the regular order;
• Car player Pioneer;
• ISO adapter, adapter, as a rule, is sold complete with radio;
• Second ISO adapter. Sold separately;
• Adaptive adapter for antenna connection. Also bought in the store;
• Adapter for steering wheel buttons to match with aftermarket radio.

After carefully studying all the available information about connecting the buttons on the steering wheel to the Pioneer radio, pinout diagrams, etc. we proceed to install the player by connecting the adapters laid out according to the iso instructions, including the antenna and its adapter. We check the operation of the radio in the usual way of control. And only then proceed to its adaptation with the steering wheel buttons.

This is where an unpleasant surprise lies in wait. The pinout color scheme is completely unsuitable for this car, although it is written in the instructions.

The information that follows is based on feedback and advice from car owners who have already encountered such a problem when connecting the Pioneer head unit to the X-trail. But we cannot guarantee its 100% accuracy!

The scheme of contact wires by colors and functions from the owners of Nissan X-trail

• The blue and purple wires are responsible for adjusting the volume increase and switching music tracks or radio stations.
• Orange and green wire - switching stations and tracks. Volume down.
• Gray and black - mass.
• Red wire - voltage.

Having achieved the work of all the buttons on the control wheel, we proceed to synchronize the steering buttons with a non-standard device through an adapter specially purchased for this.

In this case, all operations are performed according to the instructions supplied by the manufacturer, which is fully consistent with reality.

After the completion of the work, a complete check of all the functions of controlling the radio from the steering wheel is carried out.

Connecting the Pioneer radio to the steering wheel of a BMW E46 car through standard buttons

When changing the brand of the car, the process of installing and adapting the head unit with steering is similar to what we have given for Nissan and the Pioneer apparatus. If you have not yet lost the desire to independently carry out all these operations, then you can perform them by taking this article as a guide. We did not find any intelligible information from manufacturers, except for assurances of its simplicity.

We will also not describe the installation of the button block on the steering wheel with subsequent connection to the player. Because this is a topic for a separate article.

And our advice to you, if you set yourself the goal of controlling the radio without removing your hands from the steering wheel, without having buttons on the steering wheel (that is, with their preset), then purchase a ready-made multifunction steering wheel with control buttons. This will save you money and nerve cells. Although, of course, not to the same extent as contacting a specialized car audio center.