Tested only on Android Jelly Bean 4.2 and 4.3!

Installation ---
- You must root your phone
- Only GTA3 v1.4, GTAVC v1.3, GTASA v1.0.2 and v1.0.3 are supported
- Install "cleo.apk"
- Launch installed application and when it asks for access, give it
- Click the "Check" button to check the possibility of installation
- If the verification was successful, then you can try clicking "Install"
- If it works, start the game
- For GTA3 and GTAVC Standard the button can be located in the help
- On some devices, after rebooting, Cleo (not the application) must be reinstalled.

Installing the script ---
Cleo is looking for scripts in a folder that is one level up from the game.
For example:
> /Storage/sdcadrd0/Android/data/com.rockstargames.gtavc OR com.rockstar.gta3/files/
The accompanying files (FXT) must be copied to:
> /Storage/sdcadrd0/Android/data/com.rockstargames.gtavc OR com.rockstar.gta3/
In general, look at the screenshots

The Cleo scripts extension is "CSA", you can compile and decompile it with Sanny Builder 3.1.3, just like for PC with "CS" scripts.

Game controls ---
To open CLEO Cheats, simultaneously press center-up and center-bottom (as in the video), you can scroll by touching the left center or right center, to select something press center-center, you can close the window by pressing center-up and center- bottom.
To activate and deactivate all weapons in the scenario, press center-center and center-bottom press simultaneously for a few seconds.

To detect touch use
>00E1: key_pressed 3% touch_point %
> 80E1: not key_pressed 3% touch_point %
Touch screen divided into 9 parts:
1 4 7
2 5 8
3 6 9
1 - left - top
2 - left - center
3 - left - bottom
4 - center - top
5 - center - center
6 - center - bottom
7 - right - top
8 - right - center
9 - right - bottom
Decompile the scripts to see for yourself how it's done. (Example scripts are included inside).
GTASA script source included, also you can use end_thread and end_custom_thread as well.

Cleo Android provides additional opcodes for GTA3, GTAVC and GTASA, if you want to use them you need to add the lines below to the corresponding scm.ini in Sanny Builder.

0DD0=2,%1d% = get_label_addr %2d% ; android
0DD1=2,%1d% = get_func_addr_by_cstr_name %2d% ; android
0DD2=1,context_call_func %1d% ; android
0DD3=2,context_set_reg %1d% value %2d% ; android
0DD4=2,%1d% = context_get_reg %2d% ; android
0DD6=1,%1d% = get_game_version ; android
0DD7=1,%1d% = get_image_base ; android
0DD8=4,%1d% = read_mem_addr %2d% size %3d% add_ib %4d% ; android
0DD9=5,write_mem_addr %1d% value %2d% size %3d% add_ib %4d% protect %5d% ; android
0DDC=2,set_mutex_var %1d% to %2d% ; android
0DDD=2,%1d% = get_mutex_var %2d% ; android

The game version is returned at 0DD6 and can be 1 (GTA3_1_4), 2 (GTAVC_1_3), 3 (GTASA_1_0_2) and 4 (GTASA_1_0_3).
Mutex variables are used to exchange data between different scripts, for example to indicate GUI state.

All Cleo PC scripts must be manually checked for compatibility before using the Android version!

Alexander Blade

http://dev-c.com

, and I think everyone had different scripts on the PC version of GTA SA. But with the release of GTA SA on Android, the question immediately arose: is it possible to install the same scripts on mobile version games? Of course you can!
If you don’t even know what CLEO is, then there’s nothing wrong with that.
In this article we will look at 2 ways to install the CLEO library in your game. In both methods we do not need a PC..

Method No. 1 - on Android devices they shouldn't stand Root rights!

We will need the CLEO GOLD program. This program can be downloaded on Google Play, but since it is paid there, I advise you to look for it onthe vastness of the Internet.

But how can we get CLEO through it? To do this, go to the "GTA SA" tab and click install. If you get an error, then most likely you do not have Root rights installed, or the program cannot access them. I advise you to check in advance whether root rights are installed on your device. If you are now asking the question “what are root rights,” then I can definitely say that you don’t have them... I think you can find information on how to get them on the Internet.

And so... Let's go back to our program, because we are not finished with it yet. The advantage of this program is that it has a couple of scripts. In order to install them, go to the GTA SA tab, click Install new scripts. A list of scripts will appear in front of you. Click on any of them. A menu will appear, click Install in it. That's it, this script is now in your game.

In order to open the CLEO menu with our scripts in the game, swipe your finger from the top of the screen to the bottom through the center. A menu with our scripts appeared in front of us. To switch between them, press up\\down (4 or 6). To select a script, press in the center of the screen (5). The selection in most scripts (for example CarSpawner) is made by touching the screen on the left (2), right (8), top (4) or bottom (6); to confirm the choice, just touch the center (5)

Now you will ask what kind of numbers I wrote above (2,4, 5, etc.). These are parts of our screen. Often, in the description of CLEO scripts with activation not through the CLEO menu, the instructions say “activation 7+3” or something like that. So, this is a visually divided screen into 9 parts. To make it easier, here's an example of how you should visually divide your screen:

But how to add scripts downloaded from the Internet? We throw them in along the way [ android >> data >> com.rockstargames.gtasa ] The scripts must already be ported to Android devices in advance! The script for GTA SA Mobiles is not in .cs format as on PC, but in .csa
And now for those who do not have Root rights.

Method No. 2 - Root rights are not required!

This method is for those who are afraid to install Root rights on their device, or if there are no such opportunities (for example, on Android 5.0+ it is very difficult to install Root.) And in general, this method is the easiest. You don’t have to worry about anything, you just need to install a modified apk from the game with the cleo library built in.

You can download directly from this site Gta-San-Andreas-Android-1.08-Non-Root-Apk.zip

How to install this apk over the old one:
1) Download GTA SA Mobiles itself if you don’t already have it installed. Let's install it.
2) Turn on the game and exit it. (This is necessary for the game to create a cache in data)
3) Go to Android/obb/com.rockstargames.gtasa and rename it (you can just add 1 to the name) and do the same in Android/data/com.rockstargames.gtasa. (This is necessary so that when you delete the old apk, the game cache is not deleted along with it.)
4) Delete the original apk.
5) Install apk with built-in cleo
6) Rename everything back
7) Turn on the game and rejoice!

I think that's all. Since this article was quite long, I will tell you how to port scripts with and without activation in the next article. If you have any difficulties or any questions, you can write me a private message atsocial network

, and I think everyone had different scripts on the PC version of GTA SA. But with the release of GTA SA on Android, the question immediately arose: is it possible to install the same scripts on the mobile version of the game? Of course you can!
If you don’t even know what CLEO is, then there’s nothing wrong with that.
In this article we will look at 2 ways to install the CLEO library in your game. In both methods we do not need a PC..

Method No. 1 - The Android device must have Root rights!

We will need the CLEO GOLD program. This program can be downloaded from Google Play, but since it is paid there, I advise you to look for it onthe vastness of the Internet.

But how can we get CLEO through it? To do this, go to the "GTA SA" tab and click install. If you get an error, then most likely you do not have Root rights installed, or the program cannot access them. I advise you to check in advance whether root rights are installed on your device. If you are now asking the question “what are root rights,” then I can definitely say that you don’t have them... I think you can find information on how to get them on the Internet.

And so... Let's go back to our program, because we are not finished with it yet. The advantage of this program is that it has a couple of scripts. In order to install them, go to the GTA SA tab, click Install new scripts. A list of scripts will appear in front of you. Click on any of them. A menu will appear, click Install in it. That's it, this script is now in your game.

In order to open the CLEO menu with our scripts in the game, swipe your finger from the top of the screen to the bottom through the center. A menu with our scripts appeared in front of us. To switch between them, press up\\down (4 or 6). To select a script, press in the center of the screen (5). The selection in most scripts (for example CarSpawner) is made by touching the screen on the left (2), right (8), top (4) or bottom (6); to confirm the choice, just touch the center (5)

Now you will ask what kind of numbers I wrote above (2,4, 5, etc.). These are parts of our screen. Often, in the description of CLEO scripts with activation not through the CLEO menu, the instructions say “activation 7+3” or something like that. So, this is a visually divided screen into 9 parts. To make it easier, here's an example of how you should visually divide your screen:

But how to add scripts downloaded from the Internet? We throw them in along the way [ android >> data >> com.rockstargames.gtasa ] The scripts must already be ported to Android devices in advance! The script for GTA SA Mobiles is not in .cs format as on PC, but in .csa
And now for those who do not have Root rights.

Method No. 2 - Root rights are not required!

This method is for those who are afraid to install Root rights on their device, or if there are no such opportunities (for example, on Android 5.0+ it is very difficult to install Root.) And in general, this method is the easiest. You don’t have to worry about anything, you just need to install a modified apk from the game with the cleo library built in.

You can download directly from this site

How to install this apk over the old one:
1) Download GTA SA Mobiles itself if you don’t already have it installed. Let's install it.
2) Turn on the game and exit it. (This is necessary for the game to create a cache in data)
3) Go to Android/obb/com.rockstargames.gtasa and rename it (you can just add 1 to the name) and do the same in Android/data/com.rockstargames.gtasa. (This is necessary so that when you delete the old apk, the game cache is not deleted along with it.)
4) Delete the original apk.
5) Install apk with built-in cleo
6) Rename everything back
7) Turn on the game and rejoice!

I think that's all. Since this article was quite long, I will tell you how to port scripts with and without activation in the next article. If you have any difficulties or any questions, you can write me a private message atsocial network

Description

Cleo for GTA San Andreas allows you to install many different mods and scripts into the game. Do you need a new type of speedometer, add a new superpower to the CJ, install a gas sensor for your car, or - all this is possible with the help of CLEO scripts.

The mod is installed by copying the file itself to the CLEO library folder. Therefore, if the mod does not work for you, it is worth checking whether this library is installed.

Version 4.3.22 adds about 100 new instructions to support a huge number of scripts written by users using Sanny Builder. In this case, you do not need to start a new game after installing the script.

An example of modifications that require a plugin:

This version of the library supports three versions GTA games SA: 1.0 / 1.01 / 3.0 Steam

How to install CLEO for GTA San Andreas?

On our website you can download the CLEO auto-installer or an archive for manual installation. Whichever is more convenient for you.

Auto installation: run the installer and follow the instructions.

Manual installation: copy the contents of the archive to the game folder.

How to remove CLEO from GTA San Andreas?

Also, many are interested in the question of how to remove the CLEO library. To delete the library, simply erase the CLEO folder in the root directory of the game.

ATTENTION! We advise you not to save while using scripts. If you save with the script installed, then after deleting it the script will continue to work in this save.
Therefore, we do not recommend saving in important slots when using scripts.

, and I think everyone had different scripts on the PC version of GTA SA. But with the release of GTA SA on Android, the question immediately arose: is it possible to install the same scripts on the mobile version of the game? Of course you can!
If you don’t even know what CLEO is, then there’s nothing wrong with that.
In this article we will look at 2 ways to install the CLEO library in your game. In both methods we do not need a PC..

Method No. 1 - The Android device must have Root rights!

We will need the CLEO GOLD program. This program can be downloaded from Google Play, but since it is paid there, I advise you to look for it onthe vastness of the Internet.

But how can we get CLEO through it? To do this, go to the "GTA SA" tab and click install. If you get an error, then most likely you do not have Root rights installed, or the program cannot access them. I advise you to check in advance whether root rights are installed on your device. If you are now asking the question “what are root rights,” then I can definitely say that you don’t have them... I think you can find information on how to get them on the Internet.

And so... Let's go back to our program, because we are not finished with it yet. The advantage of this program is that it has a couple of scripts. In order to install them, go to the GTA SA tab, click Install new scripts. A list of scripts will appear in front of you. Click on any of them. A menu will appear, click Install in it. That's it, this script is now in your game.

In order to open the CLEO menu with our scripts in the game, swipe your finger from the top of the screen to the bottom through the center. A menu with our scripts appeared in front of us. To switch between them, press up\\down (4 or 6). To select a script, press in the center of the screen (5). The selection in most scripts (for example CarSpawner) is made by touching the screen on the left (2), right (8), top (4) or bottom (6); to confirm the choice, just touch the center (5)

Now you will ask what kind of numbers I wrote above (2,4, 5, etc.). These are parts of our screen. Often, in the description of CLEO scripts with activation not through the CLEO menu, the instructions say “activation 7+3” or something like that. So, this is a visually divided screen into 9 parts. To make it easier, here's an example of how you should visually divide your screen:

But how to add scripts downloaded from the Internet? We throw them in along the way [ android >> data >> com.rockstargames.gtasa ] The scripts must already be ported to Android devices in advance! The script for GTA SA Mobiles is not in .cs format as on PC, but in .csa
And now for those who do not have Root rights.

Method No. 2 - Root rights are not required!

This method is for those who are afraid to install Root rights on their device, or if there are no such opportunities (for example, on Android 5.0+ it is very difficult to install Root.) And in general, this method is the easiest. You don’t have to worry about anything, you just need to install a modified apk from the game with the cleo library built in.

You can download directly from this site Gta-San-Andreas-Android-1.08-Non-Root-Apk.zip

How to install this apk over the old one:
1) Download GTA SA Mobiles itself if you don’t already have it installed. Let's install it.
2) Turn on the game and exit it. (This is necessary for the game to create a cache in data)
3) Go to Android/obb/com.rockstargames.gtasa and rename it (you can just add 1 to the name) and do the same in Android/data/com.rockstargames.gtasa. (This is necessary so that when you delete the old apk, the game cache is not deleted along with it.)
4) Delete the original apk.
5) Install apk with built-in cleo
6) Rename everything back
7) Turn on the game and rejoice!

I think that's all. Since this article was quite long, I will tell you how to port scripts with and without activation in the next article. If you have any difficulties or any questions, you can write me a private message atsocial network