After using my ZTE phone for some time, I encountered some problems, my smartphone did not turn on and I solved these troubles and will talk about it in the article. ZTE is one of the most famous telephone and telecommunications equipment companies in China. However, on the international market, smartphones from this manufacturer have received recognition from a huge number of users. But, despite such popularity and the fact that the quality of components of mobile devices in the Celestial Empire is being improved every year, the problem of low-quality assembly remains relevant.

It looks like a ZTE smartphone disassembled. Here, the power connector is being repaired, due to problems with which the smartphone refuses to charge and, accordingly, turn on.

As a result, about 20% of users who have purchased this device complain about poor battery performance and problems with recharging their smartphone. Others write about ZTE software bugs. Such failures do not pass without a trace for this device and, ultimately, turn it into a so-called “brick” - that is, into a smartphone that refuses to work at all. Therefore, the article will consider the reasons why the ZTE phone does not turn on, and will also analyze the main ways to solve this problem.

What are the reasons for the failure of the ZTE phone

All problems, in general, with any computer (electronic computer), can be conditionally divided into two categories.

• Hardware - failure of certain components of the device;
• Software - failures in the device software.

This also applies to ZTE. In more detail, the main hardware reasons why this smartphone model stops working are related to:

• With the failure of the power connector or power controller. This problem is present in many ZTE smartphones, but it is especially pronounced in the budget models of this phone;
• In addition, the devices of this company have another unpleasant feature - a high probability of overheating;
• Falling or falling into water can also result in a fatal malfunction of the smartphone.

Software errors include:

• Critical system failure when updating the firmware (software) version of the smartphone;
• A virus attack, the result of which is damage to system files responsible for loading and operating the phone.

Therefore, the main ways to solve the problem of turning on a ZTE phone will be listed below.

Hard-reset is the only, to date, software way to bring the phone into working condition if it refuses to turn on at all. We will talk about this method below.

How to fix ZTE phone power on issue

So, there is the following effective way to solve this issue on your own by turning on the ZTE smartphone. It is based on the so-called "Hard Reset", that is, the complete removal of all user data on the smartphone, as well as resetting all settings on it to factory settings. This procedure helps to fix a huge number of software errors, so you should try using this method. To implement it on a ZTE smartphone, you need:

1. Remove the battery for a few seconds, then insert it back;

   It looks like one of the ZTE models disassembled. Here you can see how you can remove the battery from a ZTE phone.

2. Hold down the volume up key and turn on the phone at the same time;
3. As soon as you see the data recovery window and feel the vibration of the device, release both keys;
4. To navigate through the menu items, use the volume buttons, to confirm the action, use the power key;
5. Now, in this window, we need to find the “Wipe Data / Factory Reset” tab and activate it;

   This is the smartphone user data control panel. To wipe all data and reset the device, click on "Wipe Data / Factory Reset" (to confirm the choice, you need to click on the power button)

6. In the next window, confirm the deletion of user data;

   Confirmation window for clearing user data. Here we must click on “Yes- delete all user data”

7. The procedure for a complete reset of the phone begins, after which the “Hard Reset” menu opens again - in it we activate the “Reboot system now” item.

   The final window "Hard Reset", which is similar to the start. After completing the procedure for resetting the smartphone to factory settings and deleting all data, select the “Reboot system now” item to reboot the device.

8. As a result, the smartphone reboots, after which the device should work.

Before this procedure, do not forget to make backup copies of the files contained on the flash drive and transfer them to another device. Hard Reset involves deleting absolutely everything that was contained in the phone, including the list of saved phone contacts, call history, SMS, and more.

Conclusion

The method described above is the only one for today in the event that the problem of turning on the ZTE phone arose as a result of a fatal software error. It is better to entrust the correction of hardware errors to a specialist. However, if you want to try to fix this problem, then these guides on various breakdowns that lead to the failure of the smartphone and how to fix them will be useful for you:

Even in modern balanced Android smartphones from well-known manufacturers, sometimes there is a situation that characterizes software developers for the device from a not very good side. Quite often, even a relatively “fresh” smartphone can cause trouble for its owner in the form of a crash of the Android system, which makes it impossible to continue using the device. ZTE Blade A510 is a mid-range device, which, despite its good technical characteristics, unfortunately cannot boast of the stability and reliability of the system software from the manufacturer.

Fortunately, the troubles described above are eliminated by flashing the device, which today is not particularly difficult even for a novice user. The material below describes how to flash a ZTE Blade A510 smartphone - from a simple installation / update of the official version of the system to getting the latest Android 7 in the device.

Before proceeding with the manipulations according to the instructions below, be aware of the following.

Flashing procedures carry a potential danger! Only precise execution of instructions can predetermine the failure-free flow of software installation processes. At the same time, the Administration of the resource and the author of the article cannot guarantee the performance of the methods for each specific device! The owner performs all manipulations with the device at his own peril and risk, and bears responsibility for their consequences himself!

Any software installation process is preceded by preparatory procedures. In any case, for reinsurance, do all of the following before starting to overwrite the memory sections of the ZTE Blade A510.

Hardware revisions

The ZTE Blade A510 is available in two versions, the difference between which lies in the types of display used.

Rev1-hx8394 f _720p_lead_dsi_vdo

For this version of the smartphone, there are no restrictions on the use of software versions, you can install any official OS from ZTE.

Rev2-hx8394 d _720p_lead_dsi_vdo

In this version of the display, only official firmware versions will function properly. RU_B04, RU_B05, BY_B07, BY_B08.

You can find out which display is used in a particular device using the Device Info HW Android application, which is in the Play Store.

After installing and running Device Info HW, as well as granting root rights to the application, the display version can be viewed in the line "Display" tab "General" main screen of the program.

As you can see, determining the display type of the ZTE Blade A510 and, accordingly, the hardware revision of the device is a simple procedure, but it requires Superuser rights on the device, and obtaining them requires pre-installation of a modified recovery, which is done after a series of rather complex manipulations with the software part and will described below.

Thus, in some situations, you will have to act "blindly", not knowing for sure what type of display is used in the device. Before the revision of the smartphone is clarified, you should use only those firmware that work with both revisions, that is RU_B04, RU_B05, BY_B07, BY_B08.

Drivers

As is the case with other Android devices, in order to manipulate the ZTE Blade A510 through Windows applications, you will need drivers installed in the system. The smartphone in question does not stand out in this matter with something special. Install drivers for Mediatek devices by following the instructions from the article:

If you encounter problems or difficulties when installing drivers, use a specially created script to install the system components required for proper pairing of your smartphone and PC.

Backup important data

Each intervention in the software part of all Android devices, and the ZTE Blade A510 is no exception, carries a potential danger and in most cases involves clearing the internal memory of the device from the data contained in it, including user information. To avoid losing personal information, back up important information, and ideally a full backup of your smartphone's memory sections, using the tips from the material:

The most important thing to pay attention to is partition backup NVRAM. Damage to this area during flashing leads to the erasure of IMEI, which in turn leads to the inoperability of SIM cards.

Recovery NVRAM without a backup, it is very difficult, therefore, in the description of software installation methods Nos. 2-3 below in the article, steps are indicated that allow you to create a partition dump before interfering with the device’s memory.

Firmware

Depending on what your goal is, you can use one of several methods to overwrite the ZTE Blade A510 software. Method number 1 is most often used to update the version of the official firmware, method number 2 is the most universal and cardinal method of reinstalling the software and restoring the working state of the device, and method number 3 involves replacing the smartphone's system software with third-party solutions.

Method 1: Factory Recovery

Probably the easiest way to reinstall the firmware on the ZTE Blade A510 is to use the device's factory recovery environment. If the smartphone boots into Android, even a PC is not required to follow the instructions below, and if the device does not work correctly, then the steps listed often help restore functionality.

Additionally. In the event that any errors occur during the installation process or a prompt appears to reboot, as in the photo below, simply repeat the procedure again starting from step 1, after restarting the recovery.

Method 2: SP Flash Tool

The most effective method of flashing MTK devices is to use the proprietary development of Mediatek programmers, fortunately available to ordinary users - the SP Flash Tool program. As for the ZTE Blade A510, using the tool, you can not only reinstall the firmware completely or change its version, but also restore a device that does not start, “hangs” on the boot screen, etc.

Among other things, the ability to work with the SP Flash Tool will be needed to install custom recovery and modified OS in the ZTE Blade A510, so read the instructions, and ideally, it’s definitely worth doing it, regardless of the purpose of the firmware. The version of the program from the example below can be downloaded from the link:

The model under consideration is very sensitive to firmware procedures and quite often various failures occur during manipulations, as well as partition damage. NVRAM, so only strict adherence to the instructions below can guarantee the success of the installation!

Before moving on to the process of installing system software in the ZTE Blade A510, it is recommended that you read the article at the link below, this will help you more fully understand the picture of what is happening and better understand the terms.

The example uses firmware RU_BLADE_A510V1.0.0B05, as the most versatile and fresh solution for models and the first and second hardware revisions. Download the package with the firmware intended for installation via SP FlashTool from the link:

1. Run flash_tool.exe from the directory resulting from unpacking the archive.



2. Upload to the program MT6735M_Android_scatter.txt is a file that is present in the directory with the unpacked firmware. The button is used to add a file. "choose" located to the right of the field. By clicking it, determine the location of the file through Explorer and click "Open".



3. Now you need to create a dump of the memory area occupied by the partition NVRAM. Go to tab Readback and press Add, which will cause the line to appear in the main field of the window.



4. Left-clicking on the added line will open the Explorer window, in which you need to specify the path where the dump will be saved, as well as its name - NVRAM. Next press "Save".



5. In the window "Readback block start address", which will appear after the execution of the previous step of the instruction, enter the following values:
   • In field Start Address- 0x380000 ;
   • In field Length- value 0x500000 .

   And you press "OK".



6. Press the button Readback. Turn off the smartphone completely, and connect the USB cable to the device.



7. The process of reading information from the memory of the device will start automatically and will end very quickly with the appearance of a window "Readback OK".



8. Thus, you will have a backup file of the NVRAM partition with a size of 5 MB, which will be needed not only in the next steps of this manual, but also in the future if it becomes necessary to restore IMEI.
9. Disconnect the phone from the USB port and go to the tab Download. Uncheck the checkbox next to the item preloader and start the process of writing images to memory by pressing Download.



10. Connect the USB cable to your smartphone. Following the definition of the device in the system, the installation of the firmware in the device will automatically begin.



11. Waiting for the window to appear "Download OK" and disconnect ZTE Blade A510 from the computer's USB port.



12. Uncheck the checkboxes opposite all sections, and next to preloader, on the contrary, check the box.



13. Go to tab Format, move the formatting method switch to the position "Manual FormatFlash", and then fill in the fields in the lower area with the following data:
    • 0x380000 - in the field Begin Address;
    • 0x500000 - in the field " Format Length ».



14. Click Start, connect the device in the off state to the USB port and wait for the window to appear "Format OK".



15. Now you need to write the previously saved dump NVRAM in memory of ZTE Blade A510. This is done using the tab. "Write memory", available only in the "advanced" mode of SP FlashTool. To go to Advanced Mode you need to press a combination on the keyboard "Ctrl"+Alt+"V". Then go to the menu window and choose "Write memory".



16. Field Begin Address tab "Write memory" fill in by entering 0x380000 , and in the field "File Path" add file NVRAM, obtained as a result of performing steps No. 3-7 of this instruction. Press the button "Write memory".



17. Turned off ZTE Blade A510 connect to a PC, and then wait for the window to appear "Write Memory OK".

    

18. On this, the installation of the OS in the ZTE Blade A510 can be considered complete. Disconnect the device from the PC and turn it on by long pressing the key "Nutrition". The first time after manipulations through Flashtool, it will take about 10 minutes to wait for loading into Android, be patient.

Method 3: Custom Firmware

If the official firmware of the ZTE Blade A510 does not suit you with its functional content and capabilities, you want to try something new and interesting, then you can use the modified solutions. For the model in question, a lot of custom has been created and ported, choose any one according to your preferences, but it should be noted that developers often upload firmware with non-working hardware components.

The most common "illness" of modified solutions for the ZTE Blade A510 is the inability to use the camera with a flash. In addition, we should not forget about two revisions of the smartphone and carefully read the description of the custom, namely, for which hardware version of the A510 it is intended.

Custom firmware for the A510 is distributed in two forms - for installation through the SP Flash Tool and for installation through a modified recovery. In the general case, if a decision is made to switch to custom, it is recommended to act according to this algorithm. First flash TeamWin Recovery (TWRP), get root rights and find out exactly the hardware revision. Then install the modified OS via FlashTool without the recovery environment. Subsequently, change the firmware using custom recovery.

Installing TWRP and getting root rights

In order for the ZTE Blade A510 to have a custom recovery environment, use the method of installing a separate image using SP FlashTool.

The image file of the modified recovery can be downloaded from the link:

Installing custom via SP FlashTool

The procedure for installing custom firmware as a whole is no different from a similar process when installing an official solution. If you transferred the files of the official firmware using method # 2 above (and it is highly recommended to do this before installing the modified solution), then you already have a backup NVRAM, which means that after installing any modified OS, if necessary, you can restore the partition.

As an example, let's install a custom solution in the ZTE Blade A510 Lineage Os 14.1 based on Android 7.1. The disadvantages of the assembly include the periodic freezing of the "Camera" application, if the flash is turned on. Otherwise, this is an excellent and stable solution, and besides, it is the newest Android. The package is suitable for both revisions of the device.

Installing custom via TWRP

Installing modified firmware via TWRP is very simple. The procedure is described in detail in the material at the link below, for the ZTE Blade A510 there are no significant differences in the process.

One of the interesting solutions for the device in question is the ported MIUI 8 OS, which is characterized by a nice interface, a lot of options for fine-tuning the system, stability and access to Xiaomi services.

You can download the package for installation via TWRP from the example below at the link (suitable for both Rev1, and Rev2):

Thus, for ZTE Blade A510, there are several methods for installing system software, depending on the desired result. If something goes wrong during the installation of the system on your smartphone, do not worry. If you have a backup, restoring your smartphone to its original state through the SP Flash Tool is a matter of 10-15 minutes.

ZTE phone does not turn on what make

After some use by me of the phone of the ZTE office, I encountered some problems, my phone did not turn on and the detector was pressed by itself, I solved these problems and will talk about it in the article. ZTE is one of the most recognizable handset and telecommunications equipment companies in China. In general, and on the international market, the phones of this manufacturer have received recognition from many users. Zte Blade A510 Firmware Not Turning On After -. But, despite such popularity and the fact that the quality of mobile gadgets in China is being improved every year, the problem of low-grade assembly remains burning.

This is what a ZTE phone looks like when disassembled. We made sure that the ZTE Blade is charging, but it still does not turn on, refusing to start. If the phone does not turn on after what to do if the iPhone is strong. Here, the power connector is being repaired, due to problems with which the phone refuses to charge and, accordingly, cut in.

Ultimately, about 20% of users who have purchased this accessory complain about poor battery performance and tasks with recharging the phone. Others write about ZTE software bugs. Such failures do not pass without a trace for this accessory and, as a result, turn it into the so-called "brick" - in other words, into a phone that refuses to work at all. can be enabled without the bottom board? zte blade l2 the child broke the socket the phone is charged but does not turn on please help me what to do ???. Therefore, the article will consider the prerequisites for which the ZTE phone does not cut in, and the main methods for solving this problem will also be analyzed.

What are the reasons for the failure of the ZTE phone

All problems, in general, with any computer (electronic computer), can be conditionally divided into two categories.

• Hardware - failure of certain device devices;
• Software - failures in the software of the accessory.

This also applies to ZTE. What to do if the ZTE Blade A510 does not turn on. In more detail, the main hardware prerequisites for which this phone model stops working are related:

• With the failure of the power connector or power controller. This discrepancy is found in almost all ZTE phones, but it is especially pronounced in economical models of this phone;
• In addition, the devices of this company have another nasty feature - the highest probability of overheating;
• Falling or falling into water can also result in a fatal malfunction of the phone.

Software errors include:

• Critical system failure when updating the firmware (software) version of the phone;
• A virus attack, the result of which is damage to the system files responsible for loading and operating the phone.

Not turns on ZTE not charging ZTE

A PENNY FOR THE DEVELOPMENT OF THE CHANNEL - This is a video after the live broadcast on.

ZTE Blade X5 Diagnostics, repair does not turn on.

Therefore, the main methods for solving the problem will be listed below. turning on the phone ZTE.

Hard-reset is the only, for today, software method to bring the phone into working condition in this case, if it refuses to cut it at all. This method will be discussed below.

How to fix the problem turning on the phone ZTE

So, there is a subsequent effective method for independently solving this issue by turning on the ZTE phone. iPhone does not turn on black screen what to do. It is based on the so-called " Hard reset", In other words, the complete removal of all user data on the phone, also resetting all the options on it to industrial. This procedure helps to fix an unlimited number of software errors, so it is worth trying this method. zte blade a510. Blackened What to do if the phone does not turn on? The tablet does not turn on. LG TV does not turn on and the indicator flashes, what to do. To implement it on a ZTE phone, you need:

1. Remove the battery for a few seconds, then plug it back;

This is how one of the ZTE models looks disassembled. Here you can see how you can remove the battery from a ZTE phone.

Hold down the volume up button and turn on the phone immediately;

When you see the data recovery window and feel the vibration of the device, release both buttons;

To navigate through the menu, use the volume buttons, to prove the action - the power button;

Now, in this window, we need to find the “Wipe Data / Factory Reset” tab and activate it;

This is the phone's user data control panel. What to do when iPhone won't turn on? 6s, Glass Plywood and iPhone 6s won't charge. To wipe all data and reset the device options, click on "Wipe Data / Factory Reset" (to confirm the choice, you must click on the power button)

Confirm the deletion in the next window. user data;

Confirmation window for clearing user data. Here we must click on “Yes- delete all user data”

The procedure for a complete reset of the phone begins, after which the "Hard Reset" menu opens again - in it we activate the "Reboot system now" item.

The final window "Hard Reset", which is similar to the start. What to do if the iPhone does not turn on but the apple is on. After completing the procedure for resetting the smartphone to factory settings and deleting all data, select the “Reboot system now” item to reboot the device.

As a result, the smartphone reboots, after which the device should work.

It is necessary to separate the concept of "does not load" and "does not turn on." In the first case, the firmware will not be loaded, i.e. Android itself. In the second case, the phone itself does not turn on and here the problem can be both hardware and software.

To determine the cause, you should understand what was the root cause (impact, moisture ingress, attempt to update the firmware, install applications, etc.). Further, according to the situation, you can act: independently restore the system (in case of software errors due to applications) or seek help from professionals at the service center, including replacing damaged components.

We understand why ZTE does not boot and does not turn on

Under the wording "ZTE does not turn on", users can understand both the complete absence of the smartphone's reaction to pressing the power button (the screen does not respond, the diode does not turn on, there is no vibration shock), and loading the smartphone to the logo and further "stop".

Consider the main reasons and try to understand the situation. The cost of repairs depends entirely on the model of the phone and the cause of the breakdown.

An error

A message may pop up on the screen about some error with applications or the Android OS itself.

Here you need to act according to the situation and depending on what kind of error - eliminate it. The decoding of errors can be found on the manufacturer's website or by contacting the technical support of the service center.

If an error of any application constantly appears, then the flash memory of the phone is probably damaged. It will have to be changed. This is done only in service centers, because. a special tool is required.

As an option to solve the problem of errors and the inability to boot ZTE, this is a factory reset. According to the situation: you can do this from under Android itself in the Settings, select a reset, or through Hard Reset and loading the Recovery menu, where to select Wipe Data. But this is for those who understand what they are doing. We are not responsible for your actions.

Battery and charging issues

The lack of response of the phone when turned on may indicate problems with the battery. So, the battery could just fail. This problem is solved by replacing it. The battery may have lost its former capacity. Or we are talking about a factory marriage.

It also happens that the battery does not charge at all. The case may be in the charger - you need to purchase a new one. Much worse if the power connector or contacts were damaged. In this case, repair is required.

Mechanical damage

With mechanical damage to a ZTE smartphone, a lot could happen. If there was a strong blow, any contacts could move away, even internal hardware parts are damaged. Therefore, it is better to immediately bring the phone for diagnostics if you see the first symptoms of serious problems.

Screen problems

The screen deserves special attention. Any fall could damage the matrix. As a result, the screen will have to be replaced. This can only be done by an experienced master.

System problems

Usually, with system problems, we see either a dark screen, or the phone just slows down. Such problems are solved by reinstalling the system and installing the latest updates. A smartphone software repair specialist will quickly cope with this task. And if the phone freezes - you need to urgently contact us! Perhaps the phone is just buggy, there is nothing serious about it.

Liquid ingress

As soon as water or other liquid gets under the smartphone case, you need to immediately dry the device. Otherwise, it will be destroyed due to decay and oxidation. The device may need a serious restoration. You can’t try to charge the device, this can only aggravate the situation. Bring your ZTE, the masters will professionally dry it and restore it.

Power button issues

Sometimes the power button breaks. This could happen when dropped, pressed too hard, used in frosty weather. The problem is solved by replacement.

Solution

If ZTE does not turn on - come to us:

• Diagnostics will be performed right at the call;
• We will quickly identify the cause of the problem;
• Let's name the cost of repairs;
• Let's get to work.

As a result, you will soon be able to get a fully working ZTE smartphone!

And so, another experimental ZTE Blade A510, after flashing the official firmware, the touchscreen stopped working, sorting through a bunch of firmware from the w3bsit3-dns.com forum, (youtube is full of slag, the videos don’t match the name, they offer to download for money, don’t understand what treatment, which is alarming, everyone wants to cash in , I understand) I did not find a clear solution on the above forum ... Official support for ZTE is silent as if it had swallowed a scrap. He suggested several scenarios for the development of events. It remains to try ... In search of a solution ...

A thought creeps in, though I think it’s crazy, but I’ll still voice it, with the firmware either the touchscreen controller dies (from part of the third paragraph it will either confirm my guesses or refute), delusional right? agree. Either the variant of each device has an individual firmware, which sounds even more crazy (the second paragraph will either confirm or refute), although I do not exclude different batches of different configurations. Based again on the above forum, presumably the phone from the "factory" had firmware B004, then attempts to solve the problem:

1. Flash to a similar or lower / higher , No results, still the touchscreen does not work. An attempt to flash custom firmware (those that are sewn with the help of and have the same image files of the phone sections) led to a similar result, touchscreen didn't work .

2. Find a donor, merge the entire firmware with a known working touchscreen , flash backup and restore imei, see what happens. (donor almost found). Leaked backup changed, restored imei, touchscreen didn't work , swapped the system boards, it did not help, the touchscreen with a "foreign" system board works on the donor, the subunderground has a similar problem. There remains a third option.

3. Using the elimination method, try to replace the touchscreen (probably this is the display module, probably the display and the touchscreen are tightly glued together) while being sure that the part is known to be in good order. If the output does not start, it is obvious that something is wrong in the firmware. If the theory works with a dead controller, life takes place.

3.1. By elimination method 2, try to replace the system board while being sure that the part is known to be good. If it works on another motherboard, then the option of cloning with subsequent imei recovery takes place. If not, then more questions arise. Either the firmware killed the touchscreen controller.

Solution, display module replacement but when flashing through SPFlashTool, you must turn it off physically by first disconnecting the battery , there is a high probability of ruining the touchscreen controller, so we turn it off physically. You can also probably run into a problem with a black screen, it is treated with firmware B007 (Belarusian) custom firmware that is sewn through custom recovery, sewn painlessly with the display module connected (which would be very funny to kill the touchscreen through the same TWRP)

For sim bow.

P.S. Dear readers, this is my method of treating this problem, I do not claim authorship, maybe this is an isolated case, but still this solution and problem should be.